[1] Kamath C, El-dasher B, Gallegos G F et al. Density of additively-manufactured, 316L SS parts using laser powder-bed fusion at powers up to 400 W[J]. The International Journal of Advanced Manufacturing Technology, 74, 65-78(2014).

[2] Song C H, Fu H X, Yan Z W et al. Internal defects and control methods of laser powder bed fusion forming[J]. Chinese Journal of Lasers, 49, 1402801(2022).

[3] Williams R J, Davies C M, Hooper P A. In situ monitoring of the layer height in laser powder bed fusion[J]. Material Design Processing Communications, 3, 1-5(2021).

[4] Tyralla D, Seefeld T. Thermal based process monitoring for laser powder bed fusion (LPBF)[J]. Advanced Materials Research, 1161, 123-130(2021).

[5] Kolb T, Elahi R, Seeger J et al. Camera signal dependencies within coaxial melt pool monitoring in laser powder bed fusion[J]. Rapid Prototyping Journal, 26, 100-106(2020).

[6] Elwarfalli H, Papazoglou D, Erdahl D et al. In situ process monitoring for laser-powder bed fusion using convolutional neural networks and infrared tomography[C], 323-327(2019).

[7] Lough C S, Liu T, Wang X et al. Local prediction of laser powder bed fusion porosity by short-wave infrared imaging thermal feature porosity probability maps[J]. Journal of Materials Processing Technology, 302, 117473(2022).

[8] Taherkhani K, Sheydaeian E, Eischer C et al. Development of a defect-detection platform using photodiode signals collected from the melt pool of laser powder-bed fusion[J]. Additive Manufacturing, 46, 102152(2021).

[9] Zhao D C, Lin F. A review of on-line monitoring techniques in metal powder bed fusion processes[J]. China Mechanical Engineering, 29, 2100-2110, 2118(2018).

[10] Gunenthiram V, Peyre P, Schneider M et al. Analysis of laser-melt pool-powder bed interaction during the selective laser melting of a stainless steel[J]. Journal of Laser Applications, 29, 022303(2017).

[11] Montazeri M, Yavari R, Rao P et al. In-process monitoring of material cross-contamination defects in laser powder bed fusion[J]. Journal of Manufacturing Science and Engineering, 140, 111001(2018).

[12] Coeck S, Bisht M, Plas J et al. Prediction of lack of fusion porosity in selective laser melting based on melt pool monitoring data[J]. Additive Manufacturing, 25, 347-356(2019).

[13] Zhang K, Liu T T, Zhang C D et al. Study on deformation behavior in selective laser melting based on the analysis of the melt pool data[J]. Chinese Journal of Lasers, 42, 0903007(2015).

[14] Duan Y C, Wang X D, Zhou X et al. Machine learning of emission intensity signal of laser powder bed fusion molten pool[J]. Acta Aeronautica et Astronautica Sinica, 43, 425855(2022).

[15] Zhang T, Zhou X, Duan Y C et al. Relationship between powder bed fusion-laser forming process factors and molten pool radiation intensity[J]. Chinese Journal of Lasers, 49, 1402206(2022).

[16] Zhang T, Zhou X, Zhang P Y et al. Hardness prediction of laser powder bed fusion product based on melt pool radiation intensity[J]. Materials, 15, 4674(2022).

[17] Han Y C, Zhou M Y, Li M Y et al. Research status of process parameters of laser additive manufacturing[J]. Die Mould Industry, 45, 1-7(2019).

[18] Craeghs T, Bechmann F, Berumen S et al. Feedback control of layerwise laser melting using optical sensors[J]. Physics Procedia, 5, 505-514(2010).

[19] Riedlbauer D, Drexler M, Drummer D et al. Modelling, simulation and experimental validation of heat transfer in selective laser melting of the polymeric material PA12[J]. Computational Materials Science, 93, 239-248(2014).

[20] Du D Z, Liu T T, Liao W H et al. Design of monitoring system of melt pool light intensity in selective laser melting[J]. Infrared and Laser Engineering, 46, 1206002(2017).

[21] Zhang P Y, Zhou X, Ma H Q et al. Anomaly detection in laser metal deposition with photodiode-based melt pool monitoring system[J]. Optics Laser Technology, 144, 107454(2021).

[22] Yu G Q, Gu D D, Dai D H et al. On the role of processing parameters in thermal behavior, surface morphology and accuracy during laser 3D printing of aluminum alloy[J]. Journal of Physics D: Applied Physics, 49, 135501(2016).

[23] Lu Y B, Liu W Q, Zhang Y J et al. An adaptive hierarchical Savitzky‒Golay spectral filtering algorithm and its application[J]. Spectroscopy and Spectral Analysis, 39, 2657-2663(2019).

[24] Zhang K. Forming mechanism and experimental study on oxide ceramics manufactured by selective laser melting[D](2019).

[25] Yin J, Hao L, Yang L L et al. Investigation of interaction between vapor plume and spatter during selective laser melting additive manufacturing[J]. Chinese Journal of Lasers, 49, 1402202(2022).