[1] [1] D Banerjee, A K Gogia, T K Nandi, et al.. A new ordered orthorhombic phase in a Ti3Al-Nb alloy[J]. Acta Metallurgica, 1988, 36(4): 871-882.

[2] [2] Wu Bo. Researches on Preparation Parameters, Microstructures and Mechanical Properties of Ti2AlNb Based Alloy[D]. Beijing: General Research Institute for Nonferrous Metals, 2002.

[3] [3] C Leyens, M Peters. Titanium and Titanium Alloys[M]. Chen Zhenhua, et al. Transl. Beijing: Chemical Industry Press, 2005. 55-74.

[4] [4] Feng Aihan, Li Bobo, Shen Jun. Recent advances on Ti2AlNb-based alloys[J]. Journal of Materials and Metallurgy, 2011, 3701(10): 30-38.

[5] [5] R G Rowe, D G Konitzer, A P Woodfield, et al.. Tensile and creep behavior of ordered orthorhombic Ti2AlNb based alloys[J]. Materials Research Society, 1991, 213: 703-708.

[6] [6] Detao Cai, Jichun Chen, Xiangfeng Mao, et al.. Reheat cracking in Ti2AlNb alloy resistance spot weldments[J]. Intermetallics, 2013, 38(7): 63-69.

[7] [7] Yi Zhou, Dongli Sun, Depeng Jiang, et al.. Microstructural characteristics and evolution of Ti2AlN/TiAl composites with a network reinforcement architecture during reaction hot pressing process[J]. Materials Characterization, 2013, 80(7): 28-35.

[8] [8] Chen Xue, Weidong Zeng, Wei Wang, et al.. Quantitative analysis on microstructure evolution and tensile property for the isothermally forged Ti2AlNb based alloy during heat treatment[J]. Materials Science and Engineering: A, 2013, 573(4): 183-189.

[9] [9] H Song, Z J Wang, X D He. Improving in plasticity of orthorhombic Ti2AlNb-based alloys sheet by high density electropulsing[J]. Transactions of Nonferrous Metals Society of China, 2013, 23(1): 32-37.

[10] [10] Y Ke, H Duan, Y Sun. Effect of yttrium and erbium on the microstructure and mechanical properties of Ti-Al-Nb alloys[J]. Materials Science and Engineering: A, 2010, 528(1): 220-225.

[11] [11] T K Nandy, D Banerjee. Deformation mechanism in the O phase[J]. Intremetallics, 2000, 8(9-11): 1269-1282.

[12] [12] Huang Weidong, Lin Xin, Chen Jing, et al.. Laser Solid Forming[M]. Xi′an: Northwestern Polytechnical University Press, 2007. 249-256.

[13] [13] Jiang Hua, Tang Haibo, Fang Yanli, et al.. Microstructure and mechanical properties of rapid solidified ultra-fine columnar grain Ni-base superalloy DZ408 by laser melting deposition manufacturing[J]. Chinese J Lasers, 2012, 39(2): 0203004.

[14] [14] Li Xu, Liu Dong, Tang Haibo, et al.. Fiber laser welding characteristics of laser melting deposited TC17 alloy[J]. Chinese J Lasers, 2012, 39(1): 0103010.

[15] [15] Zhang Yongzhong, Huang Can, Wu Fuyao, et al.. Microstructure and properties of laser direct deposited TA12 titanium Alloy[J]. Chinese J Lasers, 2009, 36(12): 3215-3219.

[16] [16] Sun Jingchao, Zhang Yongzhong, Gong Xinyong, et al.. High-temperature tensile rupture life and fracture procedure of laser direct deposited Ti60 alloy and TiCp/Ti60 composites[J]. Chinese J Lasers, 2012, 39(1): 0103002.

[17] [17] Gong Xinyong, Liu Mingkun, Li Yan, et al.. Research on repair of TC11 titanium alloy components by laser melting deposition process[J]. Chinese J Lasers, 2012, 39(2): 0203005.

[18] [18] Jiang Guozheng, Chen Jing, Lin Xin, et al.. Microstructure evolution of Ti2AlNb-based alloy by laser solid forming[J]. Rare Metal Materials and Engineering, 2010, 39(3): 437-441.

[19] [19] Liu Jiantao, Lin Xin, Lü Xiaowei, et al.. Research on laser solid forming of a functionally gradient Ti-Ti2AlNb alloy[J]. Acta Metallurgica Sinica, 2008, 44(8): 1006-1012.

[20] [20] Yang Mocong, Lin Xin, Xu Xiaojing, et al.. Microstructure and phase evolution in Ti60-Ti2AlNb gradient materials prepared by laser solid forming[J]. Acta Metallurgica Sinica, 2009, 45(6): 729-736.

[21] [21] Chen Jing, Jiang Guozheng, Lin Xin, et al.. Microstructure and phase structure of laser solid forming Ti2AlNb-based alloy[J]. Chinese J Lasers, 2010, 37(2): 593-598.

[22] [22] C J Boehlert, B S Majumdar, V Seetharaman, et al.. The microstructure evolution in Ti-Al-Nb O+bcc orthorhombic alloys[J]. Metallurgical and Materials Transactions A, 1999, 30(9): 2305-2323.

[23] [23] Stroh A N. A theory of the fracture of metals[J]. Advances in Physics, 1957, 6(24): 418-465.

[24] [24] Cottrel A H. Theory of brittle fracture in steel and similar metals[J]. Trans Met Soc AIME, 1958. 212.

[25] [25] Peng Jihua, Li Shiqiong, Mao Yong, et al.. Effect of Ta on microstructures and high temperature tensile properties for Ti2AlNb based alloys[J]. The Chinese Journal of Nonferrous Metals, 2000, 10(s1): 50-54.

[26] [26] F Popille, J Douin. The dislocation microstructure in orthorhombic O Ti2AlNb deformed between room temperatrue and 800 ℃[J]. Philosophical Magazine A, 1996, 73(5): 1401-1418.

[27] [27] C J Boehlert. The tensile behavior of Ti-Al-Nb O+bcc orthorhombic alloys[J]. Metall Mater Trans A, 2001, 32(8): 1977-1988.