[1] [1] YANG J X, ZUO T Ch, XU W Q, et al.The research of laser cladding Co-base alloy coating on ductile cast iron［J］. Laser Technology, 2006, 30(5):517-519 (in Chinese).

[2] [2] CHANG H T, WANG C J, CHENG C P. Friction stir lap welded low carbon steel and ductile iron: Microstructure and mechanical properties［J］. Science and Technology of Welding and Joining, 2013, 18(8): 688-696.

[3] [3] SADEGHI A , MOLOODI A , GOLESTANIPOUR M , et al. An investigation of abrasive wear and corrosion behavior of surface repair of gray cast iron by SMAW［J］. Journal of Materials Research and Technology, 2017, 6(1):90-95.

[4] [4] SEKIGUCHI S , SHIBATA F. Mechanical properties of electron beam welded spheroidal graphite cast iron and mild steel welded joints［J］. Materials Transactions, 2011, 52(11):1920-1925.

[5] [5] LI Zh, WANG T, LIU J, et al. Effect of process parameters on corrosion resistance of aluminum alloy hybrid welded joints［J］. Laser Technology, 2019, 43(2):189-194 (in Chinese).

[6] [6] KIM J S, KIM J W, PYO C M, et al. Bead geometry prediction model for 9% nickel laser weldment, Part 1: Global regression model vs. modified regression model［J］. Processes, 2021, 9(5): 793.

[7] [7] SOMMER N , LEHTO J M , VLKERS S , et al. Laser welding of grey cast iron with spheroidal graphite-influence of process parameters on crack formation and hardness［J］. Metals-Open Access Metallurgy Journal, 2021, 11(4):532.

[8] [8] RONNY G , FRANCISCO S , OLGA P , et al. Comparing the structure and mechanical properties of welds on ductile cast iron (700 MPa) under different heat treatment conditions［J］. Metals-Open Access Metallurgy Journal, 2018, 8(1):72.

[9] [9] WANG H, SHI Y, GONG S. Numerical simulation of laser keyhole welding processes based on control volume methods［J］. Journal of Physics, 2006, D39(21): 4722.

[10] [10] WU D J, CHAI D Sh, CHENG B, et al. Flow characteristics of the molten pool in pulsed laser welding of thin sheet with filler wire［J］. Scientia Sinica: Physica, Mechanica & Astronomica, 2020, 50(3): 034208(in Chinese).

[11] [11] POURANVARI M. On the weldability of grey cast iron using nickel based filler metal［J］. Materials & Design, 2010, 31(7): 3253-3258.

[12] [12] JANICKI D , GRKA J, KWAS＇NY W, et al. Influence of solidification conditions on the microstructure of laser-surface-melted ductile cast iron［J］. Materials, 2020, 13(5):1174.

[13] [13] JAHUN F R, BENHUA Z, YUQIU S, et al. Influence of plasma remelting conditions on quantitative graphite dissolution and modified surface characteristics in 500-12 ductile iron［J］. Materials Research Express, 2020, 7(7): 076502.

[14] [14] HAN Sh G，YANG Y Q，CAI D T, et al. Influence of the distance between laser and wire on the process of aluminum alloy welding with filler wire［J］. Laser Technology, 2022, 46(4): 481-485(in Chin-ese).

[15] [15] CHEN G Y，JIANG D Y, WANG B, et al. Research on deformation control of ultrasonic-assisted laser welding of 6061 aluminum alloy［J］. Laser Technology, 2021, 45(5): 541-547 (in Chinese).

[16] [16] SHI Y , LI Y F, LIU J , et al. Investigation on the parameter optimization and performance of laser cladding a gradient composite coating by a mixed powder of Co50 and Ni/WC on 20CrMnTi low carbon alloy steel［J］. Optics & Laser Technology, 2017, 99(9):256-270.

[17] [17] LI Y J. Microstructure evolution and performance control of laser additive remanufacturing ductile iron component［D］. Harbin: Harbin Industrial University, 2019(in Chinese).

[18] [18] GHAINI F M , EBRAHIMNIA M , GHOLIZADE S . Characteristics of cracks in heat affected zone of ductile cast iron in powder welding process［J］. Engineering Failure Analysis, 2011, 18(1):47-51.

[19] [19] MARTNEZ A J, PASCUAL G M, SOLANO G L, et al. Mechanical and microstructural analysis in the welding of ductile cast iron by TIG procedure, with different filler materials and air cooling［J］. Revista de Metalurgia, 2021, 57(2): 1-7.

[20] [20] LACAZE J , SERTUCHA J , LARRAAGA P, et al. Statistical study to determine the effect of carbon, silicon, nickel and other alloying elements on the mechanical properties of as-cast ferritic ductile irons［J］. Revista de Metalurgia, 2014, 52 (2): 1-4.