[1] Couturier L, de Geuser F, Descoins M et al. Evolution of the microstructure of a 15-5PH martensitic stainless steel during precipitation hardening heat treatment[J]. Materials & Design, 107, 416-425(2016).

[2] Abad A, Hahn M, Es-Said O S. Corrosion of 15-5PH H1025 stainless steel due to environmental conditions[J]. Engineering Failure Analysis, 17, 208-212(2010).

[3] Abdelshehid M, Mahmodieh K, Mori K et al. On the correlation between fracture toughness and precipitation hardening heat treatments in 15-5PH Stainless Steel[J]. Engineering Failure Analysis, 14, 626-631(2007).

[4] Sun Y, Hebert R J, Aindow M. Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17-4PH stainless steel[J]. Materials & Design, 156, 429-440(2018).

[5] Nong X D, Zhou X L. Effect of scanning strategy on the microstructure, texture, and mechanical properties of 15-5PH stainless steel processed by selective laser melting[J]. Materials Characterization, 174, 111012(2021).

[6] Yan Q, Yan L C, Pang X L et al. Hydrogen trapping and hydrogen embrittlement in 15-5PH stainless steel[J]. Corrosion Science, 205, 110416(2022).

[7] Chen L, He Y, Yang Y X et al. The research status and development trend of additive manufacturing technology[J]. The International Journal of Advanced Manufacturing Technology, 89, 3651-3660(2017).

[8] DebRoy T, Wei H L, Zuback J S et al. Additive manufacturing of metallic components: process, structure and properties[J]. Progress in Materials Science, 92, 112-224(2018).

[9] Shan Q B, Liu C, Yao J et al. Effects of scanning strategy on the microstructure, properties, and residual stress of TC4 titanium alloy prepared by laser melting deposition[J]. Laser & Optoelectronics Progress, 58, 1114002(2021).

[10] Zhao H Y, Li X M, Lu C B. Microstructure and properties of laser cladding Ni-Al/Al2O3-13%TiO2 cermet coating[J]. Laser & Optoelectronics Progress, 57, 211406(2020).

[11] Gu D D, Shi X Y, Poprawe R et al. Material-structure-performance integrated laser-metal additive manufacturing[J]. Science, 372, eabg1487(2021).

[12] Liu Q, Lu B H. Review on quality control and relevant hybrid technology in additive manufacturing of metallic materials[J]. Materials Reports, 38, 182-189(2024).

[13] Liu Z W, Zhao K, Hao Y B et al. Microstructures and tensile properties of 15-5PH precipitation hardening stainless steel fabricated by laser melting deposition[J]. Aerospace Shanghai (Chinese & English), 38, 150-156(2021).

[14] Wang K, Zhao J F, Xie D Q et al. Improved mechanical properties of laser-repaired 15-5PH stainless steel by in situ heat treatment and grain refinement[J]. Optics & Laser Technology, 150, 107999(2022).

[15] Lin X, Huang W D. Laser additive manufacturing of high-performance metal components[J]. Scientia Sinica: Informationis, 45, 1111-1126(2015).

[16] Zhao Y H, He C, Zou J et al. Effect of external field on microstructure and properties of Al-Mg-Sc-Zr alloy prepared by laser melting deposition[J]. Acta Optica Sinica, 43, 0214002(2023).

[17] Zhao Y Z, Zhang H, Cai J L et al. Microstructure and properties of BCC-based refractory high-entropy alloy by laser additive manufacturing[J]. Chinese Journal of Lasers, 49, 1402105(2022).

[18] Yu Q, Wang C S, Dong C. Microstructure and properties of Ni-Cr-Al basic alloys fabricated by laser additive manufacturing[J]. Chinese Journal of Lasers, 49, 1402104(2022).

[19] Motallebi R, Savaedi Z, Mirzadeh H. Additive manufacturing: a review of hot deformation behavior and constitutive modeling of flow stress[J]. Current Opinion in Solid State and Materials Science, 26, 100992(2022).

[20] Sun X F, Song W, Liang J J et al. Research and development in materials and processes of superalloy fabricated by laser additive manufacturing[J]. Acta Metallurgica Sinica, 57, 1471-1483(2021).

[21] Du Y B, He G H, Zhou Z J et al. Microstructure and properties of 15-5PH coating by laser cladding on 20Cr13 surface[J]. Laser & Optoelectronics Progress, 60, 0914002(2023).

[22] Zhang Z Q, Cheng Z H, Fan X et al. Microstructure and mechanical properties of 15-5PH stainless steel repaired by laser additive process[J]. Applied Laser, 42, 80-88(2022).

[23] Unti L F K, Aota L S, Jardini A L et al. Microstructural characterization of 15-5PH stainless steel processed by laser powder-bed fusion[J]. Materials Characterization, 181, 111485(2021).

[24] Wang L, Dong C F, Kong D C et al. Effect of manufacturing parameters on the mechanical and corrosion behavior of selective laser-melted 15-5PH stainless steel[J]. Steel Research International, 91, 1900447(2020).

[25] Lee J R, Lee M S, Chae H et al. Effects of building direction and heat treatment on the local mechanical properties of direct metal laser sintered 15-5PH stainless steel[J]. Materials Characterization, 167, 110468(2020).

[26] Nong X D, Zhou X L, Wang Y D et al. Effects of geometry, location, and direction on microstructure and mechanical properties of 15-5PH stainless steel fabricated by directed energy deposition[J]. Materials Science and Engineering: A, 821, 141587(2021).

[27] Zhang B, Wang H M, Ran X Z et al. Microstructure and mechanical properties of high-efficiency laser-directed energy deposited 15-5PH stainless steel[J]. Materials Characterization, 190, 112080(2022).

[28] Yang J X, Chen Y Q, Huang Y J et al. Hierarchical microstructure of a titanium alloy fabricated by electron beam selective melting[J]. Journal of Materials Science & Technology, 42, 1-9(2020).

[29] Ge J G, Lu Z, He S L et al. Anisotropy in microstructures and mechanical properties of 2Cr13 alloy produced by wire arc additive manufacturing[J]. Acta Metallurgica Sinica, 59, 157-168(2023).

[30] Wang D, Huang J H, Tan C L et al. Review on effects of cyclic thermal input on microstructure and property of materials in laser additive manufacturing[J]. Acta Metallurgica Sinica, 58, 1221-1235(2022).

[31] Bajguirani H R H. The effect of ageing upon the microstructure and mechanical properties of type 15-5PH stainless steel[J]. Materials Science and Engineering: A, 338, 142-159(2002).

[32] Bajguirani H R H, Jenkins M L. High-resolution electron microscopy analysis of the structure of copper precipitates in a martensitic stainless steel of type PH 15-5[J]. Philosophical Magazine Letters, 73, 155-162(1996).

[33] Tan C L, Li Q, Yao X L et al. Machine learning customized novel material for energy-efficient 4D printing[J]. Advanced Science, 10, 2206607(2023).

[34] Chen W, Xu L Y, Hao K D et al. Effect of heat treatment on microstructure and performances of additively manufactured 15-5PH stainless steel[J]. Optics & Laser Technology, 157, 108711(2023).