Researching | Positron annihilation study on defect repair of pure iron and RPV steel under electropulsing treatment

NUCLEAR TECHNIQUES, Volume. 47, Issue 8, 080203(2024)

Positron annihilation study on defect repair of pure iron and RPV steel under electropulsing treatment

Haiyi WEN¹, Qiwei QUAN², Xuanye YANG¹, Wenzeng ZHAO¹, Simin ZHANG¹, Yichu WU^1、*, and Xiangbing LIU²

Author Affiliations

¹School of Physics and Technology, Hubei Key Laboratory of Nuclear Solid State Physics, Wuhan University, Wuhan 430072, China

²Suzhou Nuclear Power Research Institute, Suzhou 215004, China

show less

Abstract Get PDF(in Chinese)

Figures&Tables (8)

References (24)

Paper Information

References(24)

[1] HAO Sijie, CHU Qiang, LI Wenya et al. Effect of electropulsing treatment on the microstructure and mechanical properties of metallic materials[J]. Materials Reports, 37, 136-144(2023).

[2] Sheng Y Y, Hua Y L, Wang X J et al. Application of high-density electropulsing to improve the performance of metallic materials: mechanisms, microstructure and properties[J]. Materials, 11, 185(2018).

[3] ZHANG Xinfang, XIANG Siqi, YI Kun et al. Controlling the residual stress in metallic solids by pulsed electric current[J]. Acta Metallurgica Sinica, 58, 581-598(2022).

[4] Styman P D, Hyde J M, Parfitt D et al. Post-irradiation annealing of Ni–Mn–Si-enriched clusters in a neutron-irradiated RPV steel weld using Atom Probe Tomography[J]. Journal of Nuclear Materials, 459, 127-134(2015).

[5] SHI Yaoxin. Application of heat annealing for life extension of reactor pressure vessel[J]. Hot Working Technology, 41, 213-215(2012).

[6] ZHANG Wei, SUI Manling, ZHOU Yizhou et al. Electropulsing-induced evolution of microstructures in materials[J]. Acta Metallurgica Sinica, 39, 1009-1018(2003).

[7] LIU Xuebing, ZHANG Xinfang. Toward regeneration of aged reactor stainless steels[J]. Nuclear Power Engineering, 41, 96-100(2020).

[8] Ma R, Xiang S Q, Zhang X F. Repairing irreversible hydrogen–induced damages using electric current pulse[J]. International Journal of Hydrogen Energy, 45, 1-16917(2020).

[9] WANG Shaojie, CHEN Zhiquan, WANG Bo[M]. Applied positron spectroscopy, 18-20(2008).

[10] ZENG Hui, CHEN Zhiqiang, JIANG Jing et al. Application of positron annihilation techniques in non-destructive testing[J]. Nuclear Techniques, 37, 060203(2014).

[11] DING Zhaonan. Study on hardening and embrittlement behavior of iron-based alloys under high energy heavy ion irradiation[D](2020).

[12] ZHANG Tianci, WANG Haitao, LI Zhengcao et al. Positron annihilation investigation of embrittlement behavior in Chinese RPV steels after Fe-ion irradiation[J]. Acta Metallurgica Sinica, 54, 512-518(2018).

[13] SHI Jianjian, ZOU Qun, JIN Yang et al. Study on post-irradiation annealing microstructure and its effect on re-irradiation damage of highly irradiated RPV steel[J]. Nuclear Science and Engineering, 41, 1060-1066(2021).

[14] Dong Y, Zhao Q H, Li Y H et al. Super high counting rate of positron annihilation lifetime spectrometer achieved via multiple detectors[J]. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 1055, 168552(2023).

[15] Kuramoto E, Abe H, Takenaka M et al. Positron annihilation lifetime study of irradiated and deformed Fe and Ni[J]. Journal of Nuclear Materials, 239, 54-60(1996).

[16] Ohkubo H, Tang Z, Nagai Y et al. Positron annihilation study of vacancy-type defects in high-speed deformed Ni, Cu and Fe[J]. Materials Science and Engineering: A, 350, 95-101(2003).

[17] Dai G H, Li X H, Moser P et al. Defect recovery in α-Fe e--irradiated at 300 K[J]. Acta Physica Polonica A, 83, 277-286(1993).

[18] Mohamed H F M, Kwon J, Kim Y M et al. Vacancy-type defects in cold-worked iron studied using positron annihilation techniques[J]. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 258, 429-434(2007).

[19] Rudzińska W, Pająk J, Szuszkiewicz M et al. Positron annihilation in polycrystalline metals deformed by uniaxial tension[J]. Acta Physica Polonica A, 107, 857-863(2005).

[20] Mostafa K M, Calvillo P R, De Baerdemaeker J et al. Physical, microstructural and mechanical study of isochronal annealing of deformed commercial iron[J]. Journal of Alloys and Compounds, 656, 378-382(2016).

[21] Kudo T, Kasada R, Kimura A et al. Factors controlling irradiation hardening of iron-copper model alloy[J]. Materials Transactions, 45, 338-341(2004).

[22] GONG Yihao, JIN Shuoxue, LU Eryang et al. Effect of deformation and heat-treatment on deformation-induced defects in iron[J]. Nuclear Physics Review, 34, 646-650(2017).

[23] Zeng Z, He J, Xiang Z T et al. Embrittlement of 316L stainless steel in electropulsing treatment[J]. Journal of Materials Research and Technology, 9, 1-10678(2020).

[24] Wang T, Wei X L, Zhang H R et al. Plastic deformation mechanism transition with solute segregation and precipitation of 304 stainless steel foil induced by pulse current[J]. Materials Science and Engineering: A, 840, 142899(2022).

Tools

Get Citation

Copy Citation Text

Haiyi WEN, Qiwei QUAN, Xuanye YANG, Wenzeng ZHAO, Simin ZHANG, Yichu WU, Xiangbing LIU. Positron annihilation study on defect repair of pure iron and RPV steel under electropulsing treatment[J]. NUCLEAR TECHNIQUES, 2024, 47(8): 080203

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: ACCELERATOR, RAY TECHNOLOGY AND APPLICATIONS

Received: Apr. 22, 2024

Accepted: --

Published Online: Sep. 23, 2024

The Author Email: WU Yichu (吴奕初)

DOI:10.11889/j.0253-3219.2024.hjs.47.080203

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology