[1] [1] SHIBATA Y, KUZE N, MATSUI M, et al.Surfaceacoustic-wave properties of lithium tantalate films grown by pulsed-laser deposition [J].Jpn J Appl Phys, 1995, 34(1): 249-253.

[2] [2] GORISSE M, DROUIN A, SINQUIN Y, et al.Oriented single-crystal LiTaO3 thin film on silicon for high performances SAW components [C]∥Kobe, Japan:Proceedings of the IEEE International Ultrasonics Symposium (IUS),2018.

[3] [3] BRUEL M.Silicon-on-insulator material technology[J].Electron Lett,1995,31(14): 1201-1202.

[4] [4] LI Q, ZHANG H, ZHU H, et al.Characterizations of single-crystal lithium niobate thin films [J].Crystals,2022, 12(5):667.

[5] [5] OMORI T, MATSUDA K, YOKOYAMA N, et al.Suppression of transverse mode responses in ultrawideband SAW resonators fabricated on a Cu-grating/15°YX-LiNbO3 structure[J].IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control,2007, 54(10): 1943-1948.

[6] [6] TAKAI T, IWAMOTO H, TAKAMINE Y, et al.IHPSAW technology and its application to microacoustic components (invited) [C]∥Washington, DC:Proceedings of the IEEE International Ultrasonics Symposium(IUS), 2017.

[7] [7] PATHAK R, DADWAL U, SINGH R.Study of hydrogen implantation-induced blistering in GaSb for potential layer transfer applications [J].Journal of Physics D:Applied Physics,2017, 50(28):5301.

[8] [8] VOROBIEV A, L?FFLER M, OLSSON E, et al.Effect of growth conditions on microstructure of BiFeO3-0.33BaTiO3 films and performance of bulk a-coustic wave resonators[J].Journal of Applied Physics,2014, 115(8):4105.

[9] [9] WANG C, TU H, SU R, et al.Annealing effects on the structure and hardness of helium-irradiated Cr2AlC thin films [J].Journal of the American Ceramic Society,2020, 104(1): 593-603.

[10] [10] ZHANG K, LUO W, HUANG S, et al.Effects of rapid thermal annealing parameters on crystal ion slicing- fabricated LiTaO3 thin film [J].Applied Physics A, 2021, 127(6):468.

[11] [11] YAN Y, HUANG K, ZHOU H, et al.Wafer-scale fabrication of 42° rotated Y-cut LiTaO3-on-insulator (LTOI) substrate for a SAW resonator[J].ACS Applied Electronic Materials, 2019, 1(8): 1660-1666.

[12] [12] YANG J H, GONG Y G, CHENG M F, et al.Surface modification of PVD-TiN films using MEVVAion implantation[C]∥Shanghai: Proceedings of the 14th Congress of the International-Federation-for-Heat- Treatment-and-Surface-Engineering,Transactions Materials & Heat Treatment,2004.

[13] [13] WAN L, WU C, YUAN Y, et al.Enhanced surface blistering efficiency of H+ implanted lithium tantalate by chemical reduction modification [J].Applied Surface Science, 2023, 622: 156978.

[14] [14] LUO J, LUO W, ZHANG K, et al.High specific detectivity infrared detector using crystal ion slicing transferred LiTaO3 single-crystal thin films [J].Sensors and Actuators A: Physical, 2019, 300: 11650.

[15] [15] REPELIN Y, HUSSON E, BENNANI F, et al.Raman spectroscopy of lithium niobate and lithium tantalate.Force field calculations [J].J Phys Chem Solids,1999, 60(6): 819-825.

[18] [18] LIU W, ZHAN D, MA X, et al.Fabrication of singlecrystalline LiTaO3 film on silicon substrate using thin film transfer technology [J].Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena,2008, 26(1): 206-208.

[19] [19] PANG L L, WANG Z G, YAO C F, et al.The structural modification of LiTaO3 crystal induced by 100 keV H-ion implantation[J].Chinese Physics Letters, 2012, 29(6):6801.