[1] [1] DIETZ R W, BENNETT J M. Bowl feed technique for producing supersmooth optical surfaces ［J］. Appl. Opt., 1966,5(5):881-882.

[2] [2] LEISTNER A J, THWAITE E G, LESHA F, et al.. Polishing study using Teflon and pitch laps to produce flat and supersmooth surfaces ［J］. Appl. Opt.,1992,31(10):1472-1482.

[3] [3] SU J X. Study on material removal mechanism of wafer chemical mechanical polishing in IC manufacturing ［D］. Dalian: Dalian University of Technology, 2006. (in Chinese)

[4] [4] CARL ZEISS SMT AG. Ion beam figuring for lithography optics ［J］. Nucl. Instr. Meth. Phys. Res. B, 2009,267(8-9):1390-1393.

[5] [5] WU J F, LU ZH W, ZHANG H X, et al.. Model of ion beam figuring in aspheric optics and its error control ［J］. Opt. Precision Eng., 2009,17(11):2678-2683. (in Chinese)

[6] [6] KIRKPATRICK A. Gas cluster ion beam applications and equipment ［J］. Nucl. Instr. Meth. Phys. Res. B, 2003, 206:830-837.

[7] [7] BOLLINGER L D, STEINBERG G, ZAROWIN C B. Rapid optical figuring of aspherical surfaces with plasma-assisted chemical etching ［J］. SPIE,1992,1618:14-21.

[8] [8] ZHANG J F, WANG B, DONG SH. Application of atmospheric pressure plasma polishing method in machining of silicon ultra-smooth surface ［J］. Opt. Precision Eng., 2007,15(11):1749-1755. (in Chinese)

[9] [9] SHI CH Y, YUAN J H, WU F, et al.. Influence analysis of impact angle on material removal profile in fluid jet polishing ［J］. Acta Optica Sinica, 2010,30(2):513-517. (in Chinese)

[10] [10] GAO H G, CAO J L,CHEN B, et al.. A prototype apparatus for float polishing and initial experiments ［J］. Opt. Precision Eng., 1995,3(1):57-60. (in Chinese)

[11] [11] GORMLEY J V, MANFRA M J, CALAWA A R. Hydroplane polishing of semiconductor crystals ［J］. Rev. Sci. Instrum., 1981,52(8):1256-1259.

[12] [12] KANAOKA M, LIU C, NOMURA K, et al.. Processing efficiency of elastic emission machining for low-thermal-expansion material ［J］. Surf. Interface. Anal., 2008,40:1002-1006.

[13] [13] SHI F, DAI Y F, PENG X Q, et al.. Removal of subsurface damage in grinding magnetorheological finishing ［J］. Opt. Precision Eng., 2010,18(1):162-168. (in Chinese)

[14] [14] JUNG B, JANG K I, MIN B K, et al.. Magnetorheological finishing process for hard materials using sintered iron-CNT compound abrasives ［J］. Int. J. Mach. Tool. Manu., 2009,49:407-418.