[1] [1] Bado M F, Casas J R, Dey A, et al. Characterization of concrete shrinkage induced strains in internally-restrained RC structures by distributed optical fiber sensing[J]. Cement and Concrete Composites, 2021, 120, 104058.

[2] [2] Al-Ali A R, Beheiry S, Alnabulsi A, et al. An IoT-Based Road Bridge Health Monitoring and Warning System[J]. Sensors, 2024, 24(2): 469.

[3] [3] Lu Lidong, Yong Mingchao, Wang Qingshan, Bu Xiande, Gao Qinghao. A hybrid distributed optical fiber vibration and temperature sensor based on optical Rayleigh and Raman scattering[J]. Optics Communications, 2023, 529, 129096.

[6] [6] Yin X, Shen Y, Su D, et al. High-spatial-resolution ultrasonic sensor using a fiber-optic Fabry-Perot interferometer[J]. Optics Communications, 2019, 453, 124422.

[8] [8] Hong C, Bao C, Fei J, et al. Application of FBG technology in additive manufacturing: Monitoring real-time internal temperature of products[J]. IEEE Sensors Journal, 2020, 21(5): 6003-6011.

[9] [9] Njegovec M, Budinski V, Macuh B, et al. Microbend point and distributed fiber optic corrosion sensing[J]. IEEE Transactions on Instrumentation and Measurement, 2022, 71, 7007112.

[10] [10] Liao J, Feng W, Yang X. Fiber optic Fabry-Perot interferometer constructed by quartz capillary and titanium wire for temperature measurement[J]. Measurement Science and Technology, 2020, 32(1): 015102.

[12] [12] Li Z, Jia P, Fang G, et al. Microbubble-based fiber-optic Fabry-Perot pressure sensor for high-temperature application[J]. Applied Optics, 2018, 57(8): 1738-1743.

[17] [17] Lin S, Zhang Y, Qu Y, et al. A Miniature high-temperature fiber-optic sensor based on tip-packaged Fabry-Perot interferometer[J]. Sensors and Actuators A: Physical, 2023, 350, 114122.

[18] [18] Zhang H, Jiang C, Hu J, et al. Temperature-insensitive optical fiber strain sensor fabricated by two parallel connection Fabry-Perot interferometers with air-bubbles[J]. Review of Scientific Instruments, 2023, 94(4).