[1] MANDEEP S, DARIO Z, ELISABETTA C. Solid oxide fuel cell: decade of progress, future perspectives and challenges[J]. International Journal of Hydrogen Energy(2021).

[2] MOLENDA J, KUPECKI J, BARON R et al. Status report on high temperature fuel cells in Poland-recent advances and achievements[J]. International Journal of Hydrogen Energy(2017).

[3] VINCHHI P, KHANDLA M, CHAUDHARY K et al. Recent advances on electrolyte materials for SOFC: a review[J]. Inorganic Chemistry Communications(2023).

[4] JAISWAL N, TANWAR K, SUMAN R et al. A brief review on ceria based solid electrolytes for solid oxide fuel cells[J]. Journal of Alloys and Compounds(2019).

[5] DAS S, BHASKAR R, NARAYANAN K B. Multifunctional applications of gadolinium-doped cerium oxide (Ce_1-xGd_xO_2-∂) ceramics: a review[J]. Journal of Rare Earths(2024).

[6] ZHANG J, LENSER C, MENZLER N H et al. Comparison of solid oxide fuel cell (SOFC) electrolyte materials for operation at 500 ℃[J]. Solid State Ionics(2020).

[7] LIU Y, SHAO Z P, MORI T et al. Development of nickel based cermet anode materials in solid oxide fuel cells-now and future[J]. Materials Reports: Energy(2021).

[8] XU N, CHEN M, HAN M. Oxidation behavior of a Ni-Fe support in SOFC anode atmosphere[J]. Journal of Alloys and Compounds(2018).

[9] AHMAD M Z, AHMAD S H, CHEN R S et al. Review on recent advancement in cathode material for lower and intermediate temperature solid oxide fuel cells application[J]. International Journal of Hydrogen Energy(2022).

[10] XU H, HAN Y, ZHU J et al. Status and progress of metal- supported solid oxide fuel cell: towards large-scale manufactory and practical applications[J]. Energy Reviews(2024).

[11] LI K, WANG X, JIA L et al. High performance Ni-Fe alloy supported SOFCs fabricated by low cost tape casting-screen printing- cofiring process[J]. International Journal of Hydrogen Energy(2014).

[12] TIMURKUTLUKA B, TIMURKUTLUK C, MAT M D et al. A review on cell/stack designs for high performance solid oxide fuel cells[J]. Renewable and Sustainable Energy Reviews(2016).

[13] SHAIGAN N, QU W, IVEY D G et al. A review of recent progress in coatings, surface modifications and alloy[J]. Journal of Power Sources(2010).

[14] ZAJAC W, SUESCUN L, SWIERCZEK K et al. Structural and electrical properties of grain boundaries in Ce_0.85Gd_0.15O_1.925 solid electrolyte modified by addition of transition metal ions[J]. Journal of Power Sources(2009).

[15] DWIVEDI S. Solid oxide fuel cell: materials for anode, cathode and electrolyte[J]. International Journal of Hydrogen Energy(2020).

[16] KROMP A, NIELSEN A, BLENNOW P et al. Break-down of losses in high performing metal-supported solid oxide fuel cells[J]. Fuel Cells(2013).

[17] TSAI C H, HWANG C S, CHANG C L et al. Performances of plasma sprayed metal-supported solid oxide fuel cell and stack[J]. Fuel Cells(2018).

[18] ZHOU J, MA Z, ZHANG L et al. Study of CO₂ and H₂O direct co-electrolysis in an electrolyte-supported solid oxide electrolysis cell by aqueous tape casting technique[J]. International Journal of Hydrogen Energy(2019).

[19] CHENG J, ZHA S, FANG X et al. On the green density, sintering behavior and electrical property of tape cast Ce_0.9Gd_0.1O_1.95 electrolyte films[J]. Materials Research Bulletin(2002).

[20] ZHOU Y, XIN X, LI J et al. Performance and degradation of metal-supported solid oxide fuel cells with impregnated electrodes[J]. International Journal of Hydrogen Energy(2014).

[21] HUANGA Q, WANG B, QU W et al. Impedance diagnosis of metal-supported SOFCs with SDC as electrolyte[J]. Journal of Power Sources(2009).

[22] LEE S, JANG Y, SHIN H et al. Reliable sealing design of metal- based solid oxide fuel cell stacks for transportation applications[J]. International Journal of Hydrogen Energy(2019).

[23] TAO H, REN Q, ZHANG Y et al. High-performance and stable proton ceramic fuel cells prepared via a co-tape casting process[J]. International Journal of Hydrogen Energy(2024).

[24] ZHANG M, SONG C, LIU M et al. Study on the performance of GDC electrolytes fabricated by atmospheric plasma spraying and vacuum plasma spraying[J]. Ceramics International(2024).

[25] CHEN Z, ZHANG X, LIANG Y et al. Breakthrough in atmospheric plasma spraying of high-density composite electrolytes: deposition behavior and performance of plasma-sprayed GDC-LSGM on porous metal-supported solid oxide fuel cells[J]. International Journal of Hydrogen Energy(2024).

[26] LEE K, KANG J, LEE J et al. Evaluation of metal-supported solid oxide fuel cells (MS-SOFCs) fabricated at low temperature (-1000 ℃) using wet chemical coating processes and a catalyst wet impregnation method[J]. International Journal of Hydrogen Energy(2018).

[27] FU C, LIU Q, CHAN S et al. Effects of transition metal oxides on the densification of thin-film GDC electrolyte and on the performance of intermediate-temperature SOFC[J]. International Journal of Hydrogen Energy(2010).

[28] XIA C, LIU M. Low-temperature SOFCs based on Gd_0.1Ce_0.9O_1.95 fabricated by dry pressing[J]. Solid State Ionics(2001).

[29] FU C, CHAN S, LIU Q et al. Fabrication and evaluation of Ni-GDC composite anode prepared by aqueous-based tape casting method for low-temperature solid oxide fuel cell[J]. International Journal of Hydrogen Energy(2010).

[30] HUANG J, SULLIVAN N, ZAKUTAYEV A et al. How reliable is distribution of relaxation times (DRT) analysis? A dual regression- classification perspective on DRT estimation, interpretation, and accuracy[J]. Electrochimica Acta(2023).

[31] XIA J, WANG C, WANG X et al. A perspective on DRT applications for the analysis of solid oxide cell electrodes[J]. Electrochimica Acta(2020).

[32] SCHICHLEIN H, MÜLLER A C, VOIGTS M et al. Deconvolution of electrochemical impedance spectra for the identifcation of electrode reaction mechanisms in solid oxide fuel cells[J]. Journal of Applied Electrochemistry(2002).

[33] OSINKIN D A. Identification of gas diffusion phenomena on highly active Ni-ceramic anodes using the DRT technique[J]. Journal of Power Sources(2023).