[1] Zhang K, Chen J Q, Ma P Z et al. Effect of welding thermal cycle on microstructural evolution of Al-Zn-Mg-Cu alloy[J]. Materials Science and Engineering A, 717, 85-94(2018).

[2] Qiao J N, Lu J X, Wu S K. Fatigue cracking characteristics of fiber laser-VPTIG hybrid butt welded 7N01P-T4 aluminum alloy[J]. International Journal of Fatigue, 98, 32-40(2017).

[3] Dursun T, Soutis C. Recent developments in advanced aircraft aluminium alloys[J]. Materials & Design, 56, 862-871(2014).

[4] Wang Q Z, Zhao Y, Yan K et al. Corrosion behavior of spray formed 7055 aluminum alloy joint welded by underwater friction stir welding[J]. Materials & Design, 68, 97-103(2015).

[5] Zhang C, Gao M, Zeng X Y. Effect of microstructural characteristics on high cycle fatigue properties of laser-arc hybrid welded AA6082 aluminum alloy[J]. Journal of Materials Processing Technology, 231, 479-487(2016).

[6] Wang Q M, Qiao J N, Zou J L et al. Fiber laser-variable polarity TIG hybrid welding of A7N01 aluminum alloy with filler wire[J]. Chinese Journal of Lasers, 43, 0602004(2016).

[7] Wang C, Lü J X, Zhang J C et al. Effects of filler wires on A7204 aluminum alloy joint by fiber laser-VPTIG hybrid welding[J]. Chinese Journal of Lasers, 45, 0302002(2018).

[8] Nie Z R, Wen S P, Huang H et al. Research progress of Er-containing aluminum alloy[J]. The Chinese Journal of Nonferrous Metals, 21, 2361-2370(2011).

[9] Knipling K E, Dunand D C, Seidman D N. Criteria for developing castable, creep-resistant aluminum-based alloys: a review[J]. Zeitschrift Fur Metallkunde, 97, 246-265(2006).

[10] Yang D X, Li X Y, He D Y et al. Effect of minor Er and Zr on microstructure and mechanical properties of Al-Mg-Mn alloy (5083) welded joints[J]. Materials Science and Engineering A, 561, 226-231(2013).

[11] Zou L, Pan Q L, He Y B et al. Effect of minor scandium addition on microstructures and tensile properties of super-high strength Al-Zn-Cu-Mg-Zr alloys[J]. Journal of the Chinese Rare Earth Society, 25, 448-453(2007).

[12] Huang X, Pan Q L, Li B et al. Effect of minor Sc on microstructure and mechanical properties of Al-Zn-Mg-Zr alloy metal-inert gas welds[J]. Journal of Alloys and Compounds, 629, 197-207(2015).

[13] Erdeniz D, de Luca A, Seidman D N et al. Effects of Nb and Ta additions on the strength and coarsening resistance of precipitation-strengthened Al-Zr-Sc-Er-Si alloys[J]. Materials Characterization, 141, 260-266(2018).

[14] Wang F, Liu Z L, Qiu D et al. Revisiting the role of peritectics in grain refinement of Al alloys[J]. Acta Materialia, 61, 360-370(2013).

[15] Gutierrez A, Lippold J C. A proposed mechanism for equiaxed grain formation along the fusion boundary in aluminum-copper-lithium alloys[J]. Welding Journal, 77, 23-132(1998).

[16] Kong X F, Li F, Lü J X et al. Fiber laser welding of 5083 aluminum alloy with filler wire[J]. Chinese Journal of Lasers, 41, 1003007(2014).

[17] Katayama S. Solidification phenomena of weld metals (1st report): characteristic solidification morphologies, microstructures and solidification theory[J]. Welding International, 14, 939-951(2000).

[18] Hu Y N, Wu S C, Chen L. Review on failure behaviors of fusion welded high-strength Al alloys due to fine equiaxed zone[J]. Engineering Fracture Mechanics, 208, 45-71(2019).

[19] Zhang X X, Zhou X R, Hashimoto T et al. Corrosion behaviour of 2A97-T6 Al-Cu-Li alloy: the influence of non-uniform precipitation[J]. Corrosion Science, 132, 1-8(2018).

[20] Zhang L, Li X Y, Nie Z R et al. Comparison of microstructure and mechanical properties of TIG and laser welding joints of a new Al-Zn-Mg-Cu alloy[J]. Materials & Design, 92, 880-887(2016).

[21] Wu S C, Hu Y N, Song X P et al. On the microstructural and mechanical characterization of hybrid laser-welded Al-Zn-Mg-Cu alloys[J]. Journal of Materials Engineering and Performance, 24, 1540-1550(2015).

[22] Lathabai S, Lloyd P G. The effect of scandium on the microstructure, mechanical properties and weldability of a cast Al-Mg alloy[J]. Acta Materialia, 50, 4275-4292(2002).

[23] Hu Y N, Wu S C, Song Z et al. Fatigue property and fracture behavior of 7020 aluminum alloys welded by laser-MIG hybrid welding[J]. Chinese Journal of Lasers, 45, 0302003(2018).

[24] Zhang Y, Milkereit B, Kessler O et al. Development of continuous cooling precipitation diagrams for aluminium alloys AA7150 and AA7020[J]. Journal of Alloys and Compounds, 584, 581-589(2014).

[25] Zhang L, Li X Y, Nie Z R et al. Microstructure and mechanical properties of a new Al-Zn-Mg-Cu alloy joints welded by laser beam[J]. Materials & Design, 83, 451-458(2015).

[26] Wu D J, Fang Z A, Wu D D et al. Effect of niobium powder addition on porosity of aluminum alloy laser-arc hybrid welding[J]. Welding Technology, 45, 10-13(2016).