[1] Böllinghaus T, Herold H. Hot cracking phenomena in welds[M]. Berlin/Heidelberg: Springer-Verlag(2005).

[2] Reed R C. The Superalloys: fundamentals and applications[M]. Cambridge: Cambridge university press(2008).

[3] Chen B Y. Development of aero-engine materials[J]. Aeronautical Science and Technology, 9, 13-15(1998).

[4] Sims C T, Stoloff N S, Hagel W C. Superalloys II[M]. New York: John Wiley & Sons(1987).

[5] David S A, Vitek J M, Babu S S et al. Welding of nickel base superalloy single crystals[J]. Science and Technology of Welding and Joining, 2, 79-88(1997). http://www.researchgate.net/publication/233563091_Welding_of_nickel-base_superalloy_single_crystals_Rev_2

[6] Vitek J M, David S A, Boatner L A. Microstructural development in single crystal nickel base superalloy welds[J]. Science and Technology of Welding and Joining, 2, 109-118(1997).

[7] Park J W, Babu S S, Vitek J M et al. Stray grain formation in single crystal Ni-base superalloy welds[J]. Journal of Applied Physics, 94, 4203-4209(2003). http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=5062750

[8] Park J W, Vitek J M, Babu S S et al. Stray grain formation, thermomechanical stress and solidification cracking in single crystal nickel base superalloy welds[J]. Science and Technology of Welding and Joining, 9, 472-482(2004). http://www.tandfonline.com/doi/abs/10.1179/136217104225021841

[9] Babu S S, David S A, Park J W et al. Joining of nickel base superalloy single crystals[J]. Science and Technology of Welding and Joining, 9, 1-12(2004). http://www.ingentaconnect.com/content/maney/stwj/2004/00000009/00000001/art00001

[10] Anderson T D. DuPont J N, DebRoy T. Stray grain formation in welds of single-crystal Ni-base superalloy CMSX-4[J]. Metallurgical and Materials Transactions A, 41, 181-193(2009).

[11] Anderson T D. DuPont J N, DebRoy T. Origin of stray grain formation in single-crystal superalloy weld pools from heat transfer and fluid flow modeling[J]. Acta Materialia, 58, 1441-1454(2010).

[12] Liu Z Y, Qi H. Effects of substrate crystallographic orientations on crystal growth and microstructure formation in laser powder deposition of nickel-based superalloy[J]. Acta Materialia, 87, 248-258(2015). http://www.sciencedirect.com/science/article/pii/S1359645414009720

[13] Wang L, Wang N, Yao W J et al. Effect of substrate orientation on the columnar-to-equiaxed transition in laser surface remelted single crystal superalloys[J]. Acta Materialia, 88, 283-292(2015). http://www.sciencedirect.com/science/article/pii/S1359645415000762

[14] Wang L, Wang N. Effect of substrate orientation on the formation of equiaxed stray grains in laser surface remelted single crystal superalloys: experimental investigation[J]. Acta Materialia, 104, 250-258(2016). http://www.sciencedirect.com/science/article/pii/S1359645415300690

[15] Guo W Y, Wang D S, Wang M C. Study on behaviors of Nd-YAG laser cladding on Ni-base superalloys[J]. Applied Laser, 22, 101-104, 154(2002).

[16] Tang L F, Wang N, Guan Q et al. Effect of orientation on integrity of single crystal during laser melted single crystal[J]. Acta Physica Sinica, 59, 7941-7948(2010).

[17] Rong P, Wang N, Wang L et al. The influence of grain boundary angle on the hot cracking of single crystal superalloy DD6[J]. Journal of Alloys and Compounds, 676, 181-186(2016).

[18] Guo J C, Chen W J, Yang R N et al. The effect of substrate orientation on stray grain formation in the (111) plane in laser surface remelted single crystal superalloys[J]. Journal of Alloys and Compounds, 800, 240-246(2019). http://www.sciencedirect.com/science/article/pii/S0925838819320948

[19] Wang N, Mokadem S, Rappaz M et al. Solidification cracking of superalloy single- and bi-crystals[J]. Acta Materialia, 52, 3173-3182(2004). http://www.sciencedirect.com/science/article/pii/S1359645404001478

[20] Li J R, Zhong Z G, Liu S Z et al. A low-cost second generation single crystal superalloy DD6[C]. //Superalloys 2000 (Ninth International Symposium), September 17-21, 2000. Warrendale, PA: TMS, 777-783(2000).

[21] Hunt J D. Steady state columnar and equiaxed growth of dendrites and eutectic[J]. Materials Science and Engineering, 65, 75-83(1984). http://www.sciencedirect.com/science/article/pii/0025541684902015

[22] Gäumann M, Trivedi R, Kurz W. Nucleation ahead of the advancing interface in directional solidification[J]. Materials Science and Engineering:A, 226/227/228, 763-769(1997).

[23] Gäumann M, Bezençon C, Canalis P et al. Single-crystal laser deposition of superalloys: processing-microstructure maps[J]. Acta Materialia, 49, 1051-1062(2001). http://www.researchgate.net/publication/223809046_Single-crystal_laser_deposition_of_superalloys_Processing-microstructure_maps

[24] Rappaz M, David S A, Vitek J M et al. Development of microstructures in Fe-15Ni-15Cr single crystal electron beam welds[J]. Metallurgical Transactions A, 20, 1125-1138(1989).

[25] Churchman C, Bonifaz E A, Richards N L. Comparison of single crystal Ni based superalloy repair by gas tungsten arc and electron beam processes[J]. Materials Science and Technology, 27, 811-817(2011). http://www.tandfonline.com/doi/full/10.1179/026708310X12701095964405

[26] Wang C Y, Beckermann C. Prediction of columnar to equiaxed transition during diffusion-controlled dendritic alloy solidification[J]. Metallurgical and Materials Transactions A, 25, 1081-1093(1994). http://link.springer.com/article/10.1007/BF02652282

[27] Mokadem S. Bezen{c}on C, Hauert A, et al. Laser repair of superalloy single crystals with varying substrate orientations[J]. Metallurgical and Materials Transactions A, 38, 1500-1510(2007).

[28] Wei Y H, Liu R P, Dong Z J et al. Stress/strain distributions for weld metal solidification crack in stainless steels[J]. China Welding, 9, 36-41(2000).

[29] Wei Y H, Liu R P, Dong Z J. Development of the model for simulating weld metal solidification cracking in stainless steel[J]. China Welding, 8, 3-5(1999).

[30] Dong H B, Lee P D. Simulation of the columnar-to-equiaxed transition in directionally solidified Al-Cu alloys[J]. Acta Materialia, 53, 659-668(2005).

[31] Li Z, Sui S, Yuan Z H et al. Microstructure and tensile properties of high-deposition-rate laser metal deposited GH4169 alloy[J]. Chinese Journal of Lasers, 46, 0102004(2019).

[32] Zhou X X, Xin B, Gong Y D et al. Effect of scanning direction on microstructure and mechanical properties of part formed via variable thickness layer cladding deposition[J]. Chinese Journal of Lasers, 46, 0802003(2019).

[33] Zhang J Z, Zhang A F, Wang H et al. Microstructure and anisotropy of high performance TC4 obtained by micro forging laser cladding deposition[J]. Chinese Journal of Lasers, 46, 0402009(2019).