[1] CAI Xiangzhou, DAI Zhimin, XU Hongjie. Thorium molten salt reactor nuclear energy system[J]. Physics, 45, 578-590(2016).

[2] Yang X, Gao Y T, Zhong Y et al. Stress analysis of the TMSR graphite component under irradiation conditions[J]. Nuclear Science and Techniques, 29, 173(2018).

[3] WANG Jianqiang, DAI Zhimin, XU Hongjie. Research status and prospect of comprehensive utilization of nuclear energy[J]. Bulletin of Chinese Academy of Sciences, 34, 460-468(2019).

[4] Huang J L, Jia G B, Han L F et al. Dynamic simulation analysis of molten salt reactor-coupled air–steam combined cycle power generation system[J]. Nuclear Science and Techniques, 35, 30(2024).

[5] YANG Junkang, WANG Kai, ZHAO Pengcheng et al. Design and optimization analysis of a new double-layered tube-type main heat exchanger for lead-bismuth reactors[J]. Nuclear Techniques, 46, 100606(2023).

[6] Powers W D, Cohen S I, Greene N D. Physical properties of molten reactor fuels and coolants[J]. Nuclear Science and Engineering, 17, 200-211(1963).

[7] Cantor S, Cooke J W, Dwokin A S. Physical properties of molten-salt reactor fuel, coolant, and flush fuel[R](1968).

[8] Cantor S. Density and viscosity of several fluoride molten salt mixtures[R](1973).

[9] Romatoski R R, Hu L W. Fluoride salt coolant properties for nuclear reactor applications: a review[J]. Annals of Nuclear Energy, 109, 635-647(2017).

[10] Hoffman H W. Turbulent forced convection heat transfer in circular tubes containing molten sodium hydroxide[R](1952).

[11] Hoffman H W, Lones J. Fused salt heat transfer. Part II. forced convection heat transfer in circular tubes containing NaF-KF-LiF eutectic[R](1955).

[12] Cooke J W, Cox B. Forced-convection heat-transfer measurements with a molten fluoride salt mixture flowing in a smooth tube[R](1973).

[13] Liu B, Wu Y T, Ma C F et al. Turbulent convective heat transfer with molten salt in a circular pipe[J]. International Communications in Heat and Mass Transfer, 36, 912-916(2009).

[14] YANG Yang, ZOU Yang, CHEN Jingen et al. Flow and heat transfer characteristics of FLiNaK salt in an annular channel heater[J]. Nuclear Techniques, 45, 070604(2022).

[15] LIU Chen, LI Qiming, ZOU Yang et al. Optimization of structural parameters and thermal-hydraulic numerical simulation of printed circuit heat exchanger with airfoil fins[J]. Nuclear Techniques, 44, 110602(2021).

[16] Gabard G H, Kedl R J, Piper H B. Heat transfer performance of the MSRE main heat exchanger and radiator[R](1967).

[17] Akner M. Validating results from the molten salt reactor experiment by use of turbulent CFD simulations: a study of a modified U-tube shell-and-tube primary heat exchanger and radiator with molten salts[D](2021).

[18] He S Q, Lu J F, Ding J et al. Convective heat transfer of molten salt outside the tube bundle of heat exchanger[J]. Experimental Thermal and Fluid Science, 59, 9-14(2014).

[19] QIAN Jin. Experimental and numerical investigation on molten salt heat exchangers for the TMSR proiect[D](2017).

[20] Chen Y S, Tian J, Sun S D et al. Characteristics of the laminar convective heat transfer of molten salt in concentric tube[J]. Applied Thermal Engineering, 125, 995-1001(2017).

[21] Chen Y S, Zhu H H, Tian J et al. Convective heat transfer characteristics in the laminar and transition region of molten salt in concentric tube[J]. Applied Thermal Engineering, 117, 682-688(2017).

[22] Chen Y S, Tian J, Fu Y et al. Experimental study of heat transfer enhancement for molten salt with transversely grooved tube heat exchanger in laminar-transition-turbulent regimes[J]. Applied Thermal Engineering, 132, 95-101(2018).

[23] CHEN Yushuang, TIAN Jian, DING Mengting et al. Temperature field and stress field analysis of molten salt U-tube heat exchanger based on fluid-thermal-solid coupling method[J]. Nuclear Techniques, 46, 010604(2023).

[24] Robertson R C. MSRE design and operations report. Part I. description of reactor design[R](1965).

[25] Ked1 R J, McGlothlan C K. Tube vibration in MSRE PHX[R](1968).

[26] Guymon R H. MSRE systems and components performance[R](1973).

[27] Gabbard C H. Reactor power measurement and heat transfer performance in the molten salt reactor experiment[R](1970).

[28] Shah R K, Sekulić D P[M]. Fundamentals of heat exchanger design(2003).

[29] SHI Meizhong, WANG Zhongzheng[M]. Principle and design of heat exchangers(2009).

[30] Shah R K, Sekulic D P[M]. Fundamentals of heat exchanger design(2007).