[1] Chang G Y, Wang Y H, Cheng G H. Writing nanopores on a ZnS crystal with ultrafast Bessel beams[J]. Chinese Optics, 14, 213-225(2021).

[2] Gong D W, Fu X H, Geng S Y, et al. Design and manufacture of infrared double waveband laser filter films[J]. Chinese Optics, 4, 293-298(2011).

[3] Oshima Y, Nakamura A, Lagerlöf K P D, et al. Room-temperature creep deformation of cubic ZnS crystals under controlled light conditions[J]. Acta Materialia, 195, 690-697(2020).

[4] Li C, Xie T, Dai J, et al. Hot-pressing of zinc sulfide infrared transparent ceramics from nanopowders synthesized by the solvothermal method[J]. Ceramics International, 44, 747-752(2018).

[5] Chen B, Guo B, Zhao Q L, et al. Ultra-precision grinding of hot-pressed zinc sulfide[J]. Optics and Precision Engineering, 22, 2109-2116(2014).

[6] Wu S, Zhao J, Zhao Y, et al. Preparation, composition, and mechanical properties of CVD polycrystalline ZnS[J]. Infrared Physics & Technology, 98, 23-26(2019).

[7] Fu L G, Huo C S, Lu N O. Analysis on mechanism of different Zn-H content in as-grown CVDZnSe and CVDZnS[J]. Infrared and Laser Engineering, 34, 31-33(2005).

[8] Cui H M, Xiao H T, Qian X, et al. Effect of heat isostatic press (HIP) processed on the properties of chemical vapor deposition element ZnS[J]. Journal of Synthetic Crystals, 47, 1075-1078(2018).

[9] Loiko P, Vitkin V, Balabanov S, et al. Saturable absorption properties at 1.54 µm of Cr²⁺: ZnS prepared by thermal diffusion at hot isostatic pressing[J]. Laser Physics Letters, 16, 065801(2019).

[10] Biswas P, Kumar R, Ramavah P, et al. Effect of post-CVD thermal treatments on crystallographic orientation, microstructure, mechanical and optical properties of ZnS ceramics[J]. Journal of Alloys and Compounds, 496, 273-277(2010).

[11] Yang H, Guo L, Liu X H, et al. Recrystallization mechanism of abnormal large grains in CVD-ZnS[J]. Chinese Journal of Rare Metals, 44, 72-77(2020).

[12] Cheng H J, Yu X H, Peng L, et al. LaF₃-ZnS-Ge high-durability MWIR antireflective film on Ge substrate[J]. Infrared and Laser Engineering, 48, 1117001(2019).

[13] Wang P, Xue D B, Zhang H, et al. ESCV cutting method during infrared crystal single point diamond turning process[J]. Infrared and Laser Engineering, 48, 0742001(2019).

[14] Liu H S, Jiang C H, Li S D, et al. Effects of vacuum annealing on optical and microstructure properties of zinc sulfide thin film[J]. Optics and Precision Engineering, 25, 2038-2045(2017).