[1] [1] Y. Rao, A. B. Ribeiro, D. A. Jackson, L. Zhang, and I. Bennion, “Simultaneous spatial, time and wavelength division multiplexed in-fibre grating sensing network,” Optics Communications, 1996, 125(1 3): 53 58.

[2] [2] W. Ecke, I. Latka, R. Willsch, A. Reutlinger, and R. Graue, “Fibre optic sensor network for spacecraft health monitoring,” Measurement Science and Technology, 2001, 12(7): 974 980.

[3] [3] B. A. Childers, M. E. Froggatt, S. G. Allison, T. C. Moore, D. A. Hare, C. F. Batten, et al., “Use of 3000 Bragg grating strain sensors distributed on four 8-m optical fibers during static load tests of a composite structure,” in Proc. SPIE, vol. 4332, pp. 133 142, 2001.

[4] [4] D. J. F. Cooper, T. Coroy, and P. W. E. Smith, “Time-division-multiplexing of large serial fiber-optic Bragg grating sensor arrays,” Applied Optics, 2001, 40(16): 2643 2654.

[5] [5] Y. Wang, J. Gong, D. Wang, B. Dong, W. Bi, and Anbo Wang, “A quasi-distributed sensing network with time-division-multiplexed fiber Bragg gratings,” IEEE Photonics Technology Letters, 2011, 2(23): 70 72.

[6] [6] Y. J. Rao, A. B. Lobo Ribeiro, D. A. Jackson, L. Zhang, and I. Bennion, “Simulataneous spatial, time and wavelength division multiplexed in- fiber grating sensing network,” Optics Communications, 2012, 125: 53 58

[7] [7] M. Zhang, Q. Sun, Z. Wang, X. Li, D. Liu, and H. Liu, “A large capacity sensing network with identical weak fiber Bragg gratings multiplexing,” Optics Communications, 2012, 285(13): 3082 3087.

[8] [8] W. Chung, H.Y. Tam, P. K. A. Wai, and A. Khandelwal, “Time- and wavelength-division multiplexing of FBG sensors using a semiconductor optical amplifier in ring cavity configuration,” IEEE Photonics Technology letters, 2005, 17(12): 2709 2711.

[9] [9] G. D. Lloyd, L. A. Everall, K. Sugden, and I. Bennion, “Resonant cavity time-division-multiplexed fiber Bragg grating sensor interrogator,” IEEE Photonics Technology Letters, 2004, 16(10): 2323 2325.

[10] [10] Y. Wang, J. Gong, B. Dong, D. Y. Wang, T. J. Shilig, and A. Wang, “A large serial time-division multiplexed fiber Bragg grating sensor network,” Journal of Lightwave Technology, 2012, 30(17): 2751 2756.

[11] [11] C. G. Askins, M. A. Putnam, H. J. Patrick, and F. J. Friebele, “Fiber strength unaffected by on-line writing of single-pulse Bragg gratings,” Electronics Letters, 1997, 33(15): 1333 1334.

[12] [12] V. Hagemann, M. N. Trutzel, L. Staudigel, M. Rothhardt, H. R. Muller, and O. Krumpholz, “Mechanical resistance of draw-tower-Bragg-grating sensors,” Electronics Letters, 1998, 34(2): 211 212.

[13] [13] M. Xu, H. Geiger, J. L. Archambault, L. Reekie, and J. P. Dakin, “Novel interrogating system for fiber Bragg grating sensors using an acousto-optic tunable filter,” Electronics Letters, 1993, 29(17): 1510 1511.

[14] [14] C. G. Askins, M. A. Putnam, G. M. Williams, and E. J. Friebele, “Stepped-wavelength optical-fiber Bragg grating arrays fabricated in line on a draw tower,” Optics Letters, 1994, 19(2): 147 149.

[15] [15] S. Abad, F. M. Araujo, L. A. Ferreira, J. L. Santos, and M. Lopez-Amo, “Comparative analysis of wavelength-multiplexed photonic-sensor networks using fused biconical WDMS,” IEEE Sensors Journal, 2003, 3(4): 475 483.

[16] [16] Y. Dai, Y. Liu, J. Leng, G. Deng, and A. Asundi, “A novel time-division multiplexing fiber Bragg grating sensor interrogator for structural health monitoring,” Optics and Lasers in Engineering, 2009, 47(10): 1028 1033.

[17] [17] X. Wan and H. F. Taylor, “Multiplexing of FBG sensors using modelocked wavelength-swept fibre laser,” Electronics Letters, 2003, 39(21): 1512 1514.

[18] [18] M. Zhang, Q. Sun, Z. Wang, X. Li, D. Liu, and H. Liu, “A large capacity sensing network with identical weak fiber Bragg gratings multiplexing,” Optics Communications, 2012, 285(13 14): 3082 3087.

[19] [19] B. A. Childers, M. E. Froggatt, S. G. Allison, T. C. Moore, D. A. Hare, C. F. Batten, and D. C. Jegley, “Use of 3000 Bragg grating strain sensors distributed on four 8-m optical fibers during static load tests of a composite structure,” in Proc. SPIE, 2001, 4332(133), doi: 10.1117/12.429650.

[20] [20] D. L. Williams, B. J. Ainslie, J. R. Armitage, and R. Kashyap, “Enhanced UV photosensitivity in boron codoped germanosilicate fibers,” Electronics Letters, 1993, 29(1): 45 47.

[21] [21] http://www.fbgs-technologies.com/pagina.php id=21 366

[22] [22] B. Hartmut, S. Kay, U. Sonja, C. Christoph, R. Manfred, and L. Ines,“ Single-pulse fiber Bragg gratings and specific coatings for use at elevated temperatures,” Applied Optics, 2007, 46(17): 3417 3424.

[23] [23] D. L. Williams, B. J. Ainslie, R. Kashyap, G. D. Maxwell, J. R. Armitage, R. J. Campbell, et al., “Photosensitive index changes in germania-doped silica glass fibers and waveguides,” in Proc. SPIE, vol. 2044, pp. 56 68, 1993.

[24] [24] Y. Wang, J. Gong, D. Wang, B. Dong, W. Bi, and A. Wang, “A quasi-distributed sensing network with time-division-multiplexed fiber Bragg gratings,” IEEE Photonics Technology Letters, 2011, 2(23): 70 72.

[25] [25] C. Chan, W. Jin, D. Wang, and M. S. Demokan, “Intrinsic crosstalk analysis of a serial TDM FBG sensor array by using a tunable laser,” Microwave and Optical Technology Letters, 2003, 36(1): 2 4.

[26] [26] C. G. Askins, M. A. Putnam, and G. M. Williams, “Stepped-wavelength optical-fiber Bragg grating arrays fabricated in line on a draw tower,” Optics Letters, 1994, 19(2): 147 149.