[1] [1] Liu Hongxi, Tang Baoyin, Wang Langping et al.. Surface modification of 2Cr13 steel by plasma immersion ion implantation combined with ion beam enhanced deposition［J］. J. Aeronaut. Mater., 2005, 25(2): 32～37

[2] [2] Zhu Xiangqun, Dai Qixun, Zhou Ming et al.. Effect of tempering temperature on stress-corrosion cracking and mechanical hysteresis of 2Cr13 stainless steel［J］. Trans. Mater. Heat. Treat, 2009, 30(1): 11～19

[3] [3] Xu Hongfei, Liu Sufen, He Huashan et al.. 2Cr13 turbine blade fracture analysis［J］. Physical Test, 1999, 17(5): 38～42

[4] [4] Xu Wenliang, Tang Haoqing, Sun Yuanning. Influence of alloy elements on microstructure and properties of 2Cr13 martensitic stainless steel［J］. Baosteel Technology, 2008, 26(5): 39～43

[5] [5] Liu Xiao, Yang Jichun, Gao Xuezhong. Effects of RE on the inclusions and impact toughness of 2Cr13 stainless steel［J］. Journal of University of Science and Technology Beijing, 2010, 32(5): 606～608

[6] [6] T. V. Rajan, C. P. Sharma, A. Sharma et al.. 14th International Conference on Wear of Meterials［M］. New Delhi: Prentice Hall of India Private Limited, 1998

[7] [7] Zhang Lingfeng, Xiong Yi, Zhang Yi et al.. Microstructure of high manganese steel by laser shock processing［J］. Chinese J. Lasers, 2011, 38(6): 0603025

[8] [8] Lu Jinzhong, Luo Kaiyu, Feng Aixin et al.. Micro-structural enhancement mechanism of LY2 aluminum alloy by means of a single laser shock processing［J］. Chinese J. Lasers, 2010, 37(10): 2662～2666

[9] [9] Wu Xianqian, Huang Chenguang, Song Hongwei. Parameters analysis of residual stress induced by laser shock processing［J］. Chinese J. Lasers, 2010, 37(10): 2632～2637

[10] [10] Gu Yongyu, Zhang Lingfeng, Lu Jinzhong et al.. Micro-plastic deformation of ZrO2 in high strain rate by laser shocking［J］. Chinese J. Lasers, 2009, 36(12): 3319～3322

[11] [11] National Standardization Technical Committee. GB/T229-2007, Metal Material Charpy Pendulum Impact Test Method［S］. Beijing: China Standard Press, 2007. 1～16

[12] [12] C. S. Montross, T. Wei, L. Ye et al.. Laser shock processing and its effects on microstructure and properties of metal alloys: a review［J］. International J. Fatigue, 2002, 24(10): 1021～1036

[13] [13] Zhang Yongkan, Chen Jufang, Xu Renjun. Experimental research of laser shock strengthening AM50 magnesium alloy［J］. Chinese J. Lasers, 2008, 35(7): 1068～1072

[14] [14] Ren Xudong, Zhang Tian, Zhang Yongkang et al.. Improving fatigue properties of 00Cr12 alloy by laser shock processing［J］. Chinese J. Lasers, 2010, 37(8): 2111～2115

[15] [15] L. A. Hackel, H. Chen. Laser Peening a Processing Tool to Strengthen Metals or Alloys to Improve Fatigue Lifetime and Retard Stress Induced Corrosion Cracking［M］. New York: Laser Science and Technology, 2003. 487