[1] Noda N A, Rafar R A, Taruya Y et al. Interfacial slip verification and slip defect identification in shrink-fitted bimetallic sleeve roll used in hot rolling mill[J]. Tribology International, 175, 107793(2022).

[2] Wang J, Wei M, He J M et al. Optimization of repair process parameters for open-arc surfacing welding of grinding rolls based on the response surface method[J]. Processes, 10, 321(2022).

[3] Brezinová J, Viňáš J, Brezina J et al. Possibilities for renovation of functional surfaces of backup rolls used during steel making[J]. Metals, 10, 164(2020).

[4] Zhang S, Yu H X, Li S et al. Laser cladding strengthening test on the surface of flatness rollers[J]. ISIJ International, 63, 120-127(2023).

[5] Makarov A V, Kudryashov A E, Nevezhin S V et al. Reconditioning of continuous casting machine rollers by laser cladding[J]. Journal of Physics: Conference Series, 1679, 042047(2020).

[6] Li Y X, Zhou Y, Meng Z B et al. Research on microstructure and properties of 3D plasma spray welding repair layer of continuous casting segmented rollers[J]. Materials Research Express, 10, 116508(2023).

[7] Nikulin R G, Shchitsyn Y D, Krivonosova E A et al. Metallurgical features of plasma surfacing repair of magnesium alloys[J]. Metallurgist, 65, 1401-1412(2022).

[8] Li J, Wang Y J, Lyu Z et al. Fracture of Ni-Cr-Si-B thermal sprayed and fused reciprocating pump rods during straightening[J]. Engineering Failure Analysis, 127, 105576(2021).

[9] Lü P Y, Yu M, Luo B et al. Microstructures and properties of cold spray-laser cladding axle[J]. Chinese Journal of Lasers, 50, 1202204(2023).

[10] Chen X M, Liu D Y, Fu L et al[M]. Surface engineering and remanufacturing technology: laser cladding wear-resistant and corrosion-resistant coating(2020).

[11] Wang C, Wang W, Ding S J et al. Preparation and tribological properties of Fe-based wear-resistant coating by laser cladding[J]. Chinese Journal of Lasers, 49, 2202011(2022).

[12] Ouyang C Y, Bai Q F, Yan X G et al. Microstructure and corrosion properties of laser cladding Fe-based alloy coating on 27SiMn steel surface[J]. Coatings, 11, 552(2021).

[13] Wang S S, Shi W Q, Cheng C et al. Effect of process parameters on microstructure and properties of laser cladding Ni60+30%WC coating on Q235 steel[J]. Materials, 16, 7070(2023).

[14] Yang Y J, Aprilia A, Wu K Q et al. Post-processing of cold sprayed CoNiCrAlY coatings on inconel 718 by rapid induction heating[J]. Metals, 12, 396(2022).

[15] Zhang B C, Zhang W L, Qu X H. Composition design of additive manufacturing materials based on high throughput preparation[J]. Acta Metallurgica Sinica, 59, 75-86(2023).

[16] Wang H P, Mo J L, Mu S et al. Effects of interfacial trapezoidal grooves on the mechanical properties of coatings by laser cladding[J]. Surface and Coatings Technology, 421, 127425(2021).

[17] Song B, Zhang J L, Zhang Y J et al. Research progress of materials design for metal laser additive manufacturing[J]. Acta Metallurgica Sinica, 59, 1-15(2023).

[18] Jiang H Y, Zhao X Y, Li T Q et al. Microstructure and properties of 35.8%Fe-20%Ti-20%Al-24%Cr-0.2%Y2O3 coatings prepared by laser cladding[J]. Laser & Optoelectronics Progress, 59, 1916003(2022).

[19] Li T S, Deng D W, Li Z H et al. Effect of laser power on microstructure and hardness of Fe-TiC composite coatings[J]. Laser & Optoelectronics Progress, 60, 1914002(2023).

[20] Cao S L, Liang J, Zhou J S. Evolution in microstructure features and properties of Mo-containing Fe-Cr-Ni-B-Si composite coatings by laser cladding[J]. Materials Characterization, 188, 111926(2022).

[21] Wang X H, Zhang M, Qu S Y. Development and characterization of (Ti, Mo)C carbides reinforced Fe-based surface composite coating produced by laser cladding[J]. Optics and Lasers in Engineering, 48, 893-898(2010).

[22] Wo P C, Munroe P R, Jiang Z T et al. Enhancing toughness of CrN coatings by Ni addition for safety-critical applications[J]. Materials Science and Engineering: A, 596, 264-274(2014).

[23] Du L M, Lan L W, Zhu S et al. Effects of temperature on the tribological behavior of Al0.25CoCrFeNi high-entropy alloy[J]. Journal of Materials Science & Technology, 35, 917-925(2019).

[24] Volpp J, Prasad H S, Kaplan A. Behavior of heated powder particles on solid surfaces[J]. Procedia Manufacturing, 25, 365-374(2018).

[25] Prasad H S, Brueckner F, Kaplan A F H. Powder incorporation and spatter formation in high deposition rate blown powder directed energy deposition[J]. Additive Manufacturing, 35, 101413(2020).

[26] Hu X. Numerical simulation of weld pool flow in laser welding with powder feed[D](2016).

[27] Ma X L, Wang K M, Fu H G et al. Effect of Mo content on microstructure and properties of laser cladding Fe-based alloy coatings[J]. Surface Review and Letters, 25, 1850077(2018).

[28] Wang K M, Chang B H, Chen J S et al. Effect of molybdenum on the microstructures and properties of stainless steel coatings by laser cladding[J]. Applied Sciences, 7, 1065(2017).

[29] Chen G S, Zhu Q B, Hao J M. Effect of Ni on microstructure and performance of argon arc surfacing layer of iron-based alloy powder block[J]. Coal Mine Machinery, 41, 105-106(2020).

[30] Sun B, Wang Q Q, Chen Y X et al. Dendrite refinement and wear performance enhancement in laser-cladded Fe-based coatings after multi-step laser remelting[J]. Surface and Coatings Technology, 447, 128794(2022).

[31] Mote V, Purushotham Y, Dole B. Williamson‒Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles[J]. Journal of Theoretical and Applied Physics, 6, 6(2012).

[32] Aguilar-Hurtado J Y, Vargas-Uscategui A, Zambrano-Mera D et al. The effect of boron content on the microstructure and mechanical properties of Fe50-xMn30Co10Cr10Bx (x=0, 0.3, 0.6 and 1.7wt%) multi-component alloys prepared by arc-melting[J]. Materials Science and Engineering: A, 748, 244-252(2019).

[33] Ali R, Mazaher R, Mehdi N et al. The effect of the amount and size of alumina sintering aid particles on some mechanical properties and microstructure of silicon carbide bulky pieces via spark plasma sintering[J]. International Journal of Materials Research, 114, 469-478(2023).

[34] Bi G P, Guan Y, Chen X Y et al. Evaluation of uncertainty in determining average grain size by ASTM E112 standard[J]. IOP Conference Series: Materials Science and Engineering, 733, 012045(2020).

[35] Li S, Hu Q W, Zeng X Y et al. Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer[J]. Applied Surface Science, 240, 63-70(2005).

[36] Zhang H, Pan Y J, Zhang Y et al. Microstructure, toughness, and tribological properties of laser cladded Mo2FeB2-based composite coating with in situ synthesized WC and La2O3 addition[J]. Surface and Coatings Technology, 449, 128947(2022).

[37] Zhao W X, Zhou Z, Huang J et al. Microstructure and frictional wear behavior of FeCrNiMo alloy layer fabricated by laser cladding[J]. Acta Metallurgica Sinica, 57, 1291-1298(2021).

[38] Ma G L, Cui H Z, Jiang D et al. The evolution of multi and hierarchical carbides and their collaborative wear-resisting effects in CoCrNi/WC composite coatings via laser cladding[J]. Materials Today Communications, 30, 103223(2022).

[39] Liu J, Liu D F, Li S C et al. The effects of graphene oxide doping on the friction and wear properties of TiN bioinert ceramic coatings prepared using wide-band laser cladding[J]. Surface and Coatings Technology, 458, 129354(2023).

[40] Yang Y, Wang A H, Xiong D H et al. Effect of Cr content on microstructure and oxidation resistance of laser-clad Cu-Ni-Fe-Mo-xCr alloy coating[J]. Surface and Coatings Technology, 384, 125316(2020).

[41] Lao Y X, Du H, Xiong T Y et al. Evolution behaviors of oxides in severely plastic deformed region of AISI 52100 steel during dry sliding wear[J]. Journal of Materials Science & Technology, 33, 330-337(2017).

[42] Ma G Z, Xu B S, Wang H D et al. Effect of surface nanocrystallization on the tribological properties of 1Cr18Ni9Ti stainless steel[J]. Materials Letters, 65, 1268-1271(2011).