[1] Wealer B, Bauer S, Hirschhausen C V et al. Investing into third generation nuclear power plants - review of recent trends and analysis of future investments using Monte Carlo Simulation[J]. Renewable and Sustainable Energy Reviews, 143, 110836(2021).

[2] Zinkle S J, Terrani K A, Snead L L. Motivation for utilizing new high-performance advanced materials in nuclear energy systems[J]. Current Opinion in Solid State and Materials Science, 20, 401-410(2016).

[3] Charit I. Accident tolerant nuclear fuels and cladding materials[J]. JOM, 70, 173-175(2018).

[4] Viswanathan U K, Sah D N, Rath B N et al. Measurement of fission gas release, internal pressure and cladding creep rate in the fuel pins of PHWR bundle of normal discharge burnup[J]. Journal of Nuclear Materials, 392, 545-551(2009).

[5] Yadav A K, Majumdar P, Kumar R et al. Experimental simulation of asymmetric heat up of coolant channel under small break LOCA condition for PHWR[J]. Nuclear Engineering and Design, 255, 138-145(2013).

[6] Massey C P, Terrani K A, Dryepondt S N et al. Cladding burst behavior of Fe-based alloys under LOCA[J]. Journal of Nuclear Materials, 470, 128-138(2016).

[7] Gussev M N, Byun T S, Yamamoto Y et al. In-situ tube burst testing and high-temperature deformation behavior of candidate materials for accident tolerant fuel cladding[J]. Journal of Nuclear Materials, 466, 417-425(2015).

[8] WU Yuchao. Effect of element Y on microstructure and properties of FeCrAl alloy[D](2018).

[9] Yamamoto Y, Pint B A, Terrani K A et al. Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors[J]. Journal of Nuclear Materials, 467, 703-716(2015).

[10] HUANG Xi, LI Xiaoyan, FANG Xiaodong et al. Research progress in FeCrAl alloys for accident-tolerant fuel cladding[J]. Journal of Materials Engineering, 48, 19-33(2020).

[11] Pint B A, Terrani K A, Brady M P et al. High temperature oxidation of fuel cladding candidate materials in steam-hydrogen environments[J]. Journal of Nuclear Materials, 440, 420-427(2013).

[12] Falaakh D F, Kim S, Bahn C B. Microstructure of aluminium oxide formed on ferritic FeCrAl alloy after high-temperature steam oxidation[J]. Materials at High Temperatures, 37, 207-219(2020).

[13] QIAO Haibo. Preparation and properties of FeCrAl accident-tolerant fuel cladding[D](2017).

[14] CHEN Ying, NIE Zuoren, ZHOU Meiling et al. Form of rare earth elements of La and Y in FeCrAl-RE alloys[J]. The Chinese Journal of Nonferrous Metals, 11, 135-138(2001).

[15] WEN Dungu, TAN Jun, CHEN Liutao et al. Study on the burst tests and properties of zirconium alloys for nuclear reactor[J]. Materials Research and Application, 10, 48-52(2016).

[16] LI Bei, WU Shuangxia, YAN Yuxin et al. Y Fe phase and its effects on microstructure and properties in Fe-15Cr-4Al-Y alloys[J]. Journal of the Chinese Rare Earth Society, 15, 139-145(1997).

[17] Yamamoto Y, Yang Y, Field K et al. Letter report documenting progress of second generation ATF FeCrAl alloy fabrication[R](2014).

[18] PENG Qichun, LI Guangqiang, ZHU Chengyi. Influence of rare earth elements on oxidation resistance of Fe-Cr-Al alloy[J]. Chinese Rare Earths, 24, 13-17(2003).

[19] Pivin J C, Roques-Carmes C, Chaumont J et al. The influence of yttrium implantation on the oxidation behaviour of 67Ni-33Cr, Fe-43Ni-27Cr and Fe-41Ni-25Cr-10Al refractory alloys[J]. Corrosion Science, 20, 947-962(1980).

[20] Jedliński J. Comments on the use of the two-stage-oxidation method and surface analytical techniques in studying growth processes of oxidation scale[J]. Oxidation of Metals, 39, 61-68(1993).