[1] [1] Zhou L Y, Fu J Z and He Y 2020 A review of 3D printing technologies for soft polymer materialsAdv. Funct. Mater.302000187

[2] [2] Jiang L, Walczyk D, McIntyre G, Bucinell R and Li B B 2019 Bioresin infused then cured mycelium-based sandwich-structure biocomposites: resin transfer molding (RTM) process, flexural properties, and simulationJ. Clean. Prod.207123–35

[3] [3] Fan Z Q, Tan Q Y, Kang C W and Huang H 2024 Advances and challenges in direct additive manufacturing of dense ceramic oxidesInt. J. Extrem. Manuf.6052004

[4] [4] Yan Y F, Kou S Q, Yang H Y, Shu S L, Qiu F, Jiang Q C and Zhang L C 2023 Ceramic particles reinforced copper matrix composites manufactured by advanced powder metallurgy: preparation, performance, and mechanismsInt. J. Extrem. Manuf.5032006

[5] [5] de Barros N Ret al2023 Gelatin methacryloyl and Laponite bioink for 3D bioprinted organotypic tumor modelingBiofabrication15045005

[6] [6] Rashad A, Gomez A, Gangrade A, Zehtabi F, Mandal K, Maity S, Ma C Y, Li B B, Khademhosseini A and De Barros N R 2024 Effect of viscosity of gelatin methacryloyl-based bioinks on bone cellsBiofabrication16045036

[7] [7] Gilmer D B, Han L, Lehmann M L, Siddel D H, Yang G, Chowdhury A U, Doughty B, Elliott A M and Saito T 2021 Additive manufacturing of strong silica sand structures enabled by polyethyleneimine binderNat. Commun.125144

[8] [8] Chen L Y, Qin P, Zhang L N and Zhang L C 2024 An overview of additively manufactured metal matrix composites: preparation, performance, and challengeInt. J. Extrem. Manuf.6052006

[9] [9] Ma H Y, Wang J C, Qin P, Liu Y J, Chen L Y, Wang L Q and Zhang L C 2024 Advances in additively manufactured titanium alloys by powder bed fusion and directed energy deposition: microstructure, defects, and mechanical behaviorJ. Mater. Sci. Technol.18332–62

[10] [10] Jian B C, Li H G, He X N, Wang R, Yang H Y and Ge Q 2024 Two-photon polymerization-based 4D printing and its applicationsInt. J. Extrem. Manuf.6012001

[11] [11] Lee S J, Jeong W and Atala A 2024 3D Bioprinting for engineered tissue constructs and patient-specific models: current progress and prospects in clinical applicationsAdv. Mater.36e2408032

[12] [12] Duan Y Q, Xie W S, Yin Z P and Huang Y A 2024 Multi-material 3D nanoprinting for structures to functional micro/nanosystemsInt. J. Extrem. Manuf.6063001

[13] [13] Chen Z J, Zhang C and Zheng Z J 2024 Advancements in transfer printing techniques for flexible electronics: adjusting interfaces and promoting versatilityInt. J. Extrem. Manuf.6052005

[14] [14] Davoodi Eet al2022 Additively manufactured metallic biomaterialsBioact. Mater.15214–49

[15] [15] Costabeber Get al2024 Additive manufacturing of polylactic acid scaffolds dip-coated with polycaprolactone for bone tissue engineeringMater. Today Commun.40109646

[16] [16] Li B B, Hesar B D, Zhao Y W and Ding L 2023 Design and additive manufacturing of porous titanium scaffolds for optimum cell viability in bone tissue engineeringProc. Inst. Mech. Eng.B2372015–24

[17] [17] Ma C Y, Grandhi M, Mallory P, Liu Z C, Li B B and Kang B 2024 Directed energy deposited SS316L with nano-Y2O3 additions: powder processing, microstructure, and mechanical propertiesProg. Addit. Manuf.pp 1–16

[18] [18] Wei S S, Zhang J L, Zhang L, Zhang Y J, Song B, Wang X B, Fan J X, Liu Q and Shi Y S 2023 Laser powder bed fusion additive manufacturing of NiTi shape memory alloys: a reviewInt. J. Extrem. Manuf.5032001

[19] [19] Zhang L C and Wang J C 2024 Stabilizing 3D-printed metal alloysScience383586–7

[20] [20] Hai Alami A, Ghani Olabi A, Khuri S, Aljaghoub H, Alasad S, Ramadan M and Ali Abdelkareem M 2024 3D printing in the food industry: recent progress and role in achieving sustainable development goalsAin Shams Eng. J.15102386

[21] [21] Son J H, Kim H, Choi Y and Lee H 2024 3D printed energy devices: generation, conversion, and storageMicrosyst. Nanoeng.1093

[22] [22] Ma G W, Buswell R, Leal da Silva W R, Wang L, Xu J and Jones S Z 2022 Technology readiness: a global snapshot of 3D concrete printing and the frontiers for developmentCem. Concr. Res.156106774

[23] [23] Ye J H, El Desouky A and Elwany A 2024 On the applications of additive manufacturing in semiconductor manufacturing equipmentJ. Manuf. Process.1241065–79

[24] [24] Haghnegahdar L, Joshi S S and Dahotre N B 2022 From IoT-based cloud manufacturing approach to intelligent additive manufacturing: industrial Internet of Things—an overviewInt. J. Adv. Manuf. Technol.1191461–78

[25] [25] Machaka R, Motsi G T, Raganya L M, Radingoana P M and Chikosha S 2021 Machine learning-based prediction of phases in high-entropy alloys: a data articleData Brief38107346

[26] [26] Zheng Z W, Yue X Z, Wang J C and Hou J 2024 A framework for general-purpose microscopic image analysis via self-supervised learningMater. Charact.213114003

[27] [27] Wang Het al2024 Recent advances in machine learning-assisted fatigue life prediction of additive manufactured metallic materials: a reviewJ. Mater. Sci. Technol.198111–36

[28] [28] Xiong Y, Tang Y L, Zhou Q, Ma Y S and Rosen D W 2022 Intelligent additive manufacturing and design: state of the art and future perspectivesAddit. Manuf.59103139

[29] [29] Ko H, Witherell P, Lu Y, Kim S and Rosen D W 2021 Machine learning and knowledge graph based design rule construction for additive manufacturingAddit. Manuf.37101620

[30] [30] Lu L, Hou J, Yuan S Q, Yao X L, Li Y M and Zhu J H 2023 Deep learning-assisted real-time defect detection and closed-loop adjustment for additive manufacturing of continuous fiber-reinforced polymer compositesRob. Comput. Integr. Manuf.79102431

[31] [31] Phua A, Davies C H J and Delaney G W 2022 A digital twin hierarchy for metal additive manufacturingComput. Ind.140103667

[32] [32] Mu H C, He F Y, Yuan L, Commins P, Wang H M and Pan Z X 2023 Toward a smart wire arc additive manufacturing system: a review on current developments and a framework of digital twinJ. Manuf. Syst.67174–89

[33] [33] Zhang Y, Safdar M, Xie J R, Li J H, Sage M and Zhao Y F 2023 A systematic review on data of additive manufacturing for machine learning applications: the data quality, type, preprocessing, and managementJ. Intell. Manuf.343305–40

[34] [34] Cai Y H, Xiong J, Chen H and Zhang G J 2023 A review ofin-situmonitoring and process control system in metal-based laser additive manufacturingJ. Manuf. Syst.70309–26

[35] [35] An J and Leong K F 2023 Multi-material and multi-dimensional 3D printing for biomedical materials and devicesBiomed. Mater. Devices138–48

[36] [36] Shaukat U, Rossegger E and Schlgl S 2022 A review of multi-material 3D printing of functional materials via vat photopolymerizationPolymers142449

[37] [37] Nazir A, Gokcekaya O, Md Masum Billah K, Ertugrul O, Jiang J C, Sun J Y and Hussain S 2023 Multi-material additive manufacturing: a systematic review of design, properties, applications, challenges, and 3D printing of materials and cellular metamaterialsMater. Des.226111661

[38] [38] Rafiee M, Farahani R D and Therriault D 2020 Multi-material 3D and 4D printing: a surveyAdv. Sci.71902307

[39] [39] Bhatt P M, Malhan R K, Shembekar A V, Yoon Y J and Gupta S K 2020 Expanding capabilities of additive manufacturing through use of robotics technologies: a surveyAddit. Manuf.31100933

[40] [40] Pires J N, Azar A S, Nogueira F, Zhu C Y, Branco R and Tankova T 2022 The role of robotics in additive manufacturing: review of the AM processes and introduction of an intelligent systemInd. Robot.49311–31

[41] [41] Kaji F, Jinoop A N, Zardoshtian A, Hallen P, Frikel G, Tang T Y, Zimny M and Toyserkani E 2023 Robotic laser directed energy deposition-based additive manufacturing of tubular components with variable overhang angles: adaptive trajectory planning and characterizationAddit. Manuf.61103366

[42] [42] Wu C M, Dai C K, Fang G X, Liu Y J and Wang C C L 2017 RoboFDM: a robotic system for support-free fabrication using FDMIEEE Int. Conf. on Robotics and Automation (ICRA 2017)(Singapore,29 May-03 June) (IEEE) pp 1175–80

[43] [43] Bhatt P M, Malhan R K, Rajendran P and Gupta S K 2020 Building free-form thin shell parts using supportless extrusion-based additive manufacturingAddit. Manuf.32101003

[44] [44] Badarinath R and Prabhu V 2021 Integration and evaluation of robotic fused filament fabrication systemAddit. Manuf.41101951

[45] [45] Reisch R, Hauser T, Kamps T and Knoll A 2020 Robot based wire arc additive manufacturing system with context-sensitive multivariate monitoring frameworkProcedia Manuf.51732–9

[46] [46] Zapata A, Benda A, Spreitler M, Zhao X F, Bernauer C, Yoshioka H and Zaeh M F 2023 A model-based approach to reduce kinematics-related overfill in robot-guided laser directed energy depositionCIRP J. Manuf. Sci. Technol.45200–9

[47] [47] Tiryaki M E, Zhang X and Pham Q C 2019 Printing-while-moving: a new paradigm for large-scale robotic 3D PrintingProc. IEEE/RSJ Int. Conf. on Intelligent Robots and Systems (IROS 2019)(Macau, China, 3–8 November) (IEEE) pp 2286–91

[48] [48] Lachmayer L, Recker T and Raatz A 2022 Contour tracking control for mobile robots applicable to large-scale assembly and additive manufacturing in constructionProcedia CIRP106108–13

[49] [49] Sustarevas J, Kanoulas D and Julier S 2022. Autonomous mobile 3D printing of large-scale trajectoriesProc. IEEE/RSJ Int. Conf. on Intelligent Robots and Systems (IROS 2022)(Kyoto, Japan, 23–27October) (IEEE) pp 6561–8

[50] [50] Zhang Ket al2022 Aerial additive manufacturing with multiple autonomous robotsNature609709–17

[51] [51] Sustarevas J, Kanoulas D and Julier S 2021 Task-consistent path planning for mobile 3D printingProc. IEEE/RSJ Int. Conf. on Intelligent Robots and Systems (IROS 2021)(Prague, Czech Republic, September 27–1 October) (IEEE) pp 2143–50

[52] [52] Alhijaily A, Kilic Z M and Bartolo A N P 2023 Teams of robots in additive manufacturing: a reviewVirtual Phys. Prototyp.18e2162929

[53] [53] Jiang J C and Ma Y S 2020 Path planning strategies to optimize accuracy, quality, build time and material use in additive manufacturing: a reviewMicromachines11633

[54] [54] Tian C X, Li T J, Bustillos J, Bhattacharya S, Turnham T, Yeo J and Moridi A 2021 Data-driven approaches toward smarter additive manufacturingAdv. Intell. Syst.32100014

[55] [55] Volpato N, Galvo L C, Nunes L F, Souza R I and Oguido K 2020 Combining heuristics for tool-path optimisation in material extrusion additive manufacturingJ. Oper. Res. Soc.71867–77

[56] [56] Gharehpapagh B, Dilberoglu U M, Yaman U and Dolen M 2023 Adaptive toolpath generation for material extrusion additive manufacturing using a nozzle with rectangular orificeAddit. Manuf.78103873

[57] [57] Gopsill J A, Shindler J and Hicks B J 2018 Using finite element analysis to influence the infill design of fused deposition modelled partsProg. Addit. Manuf.3145–63

[58] [58] Lachmayer L, Ekanayaka V, Hrkamp A and Raatz A 2021 Approach to an optimized printing path for additive manufacturing in construction utilizing FEM modelingProcedia CIRP104600–5

[59] [59] Sales E, Kwok T H and Chen Y 2021 Function-aware slicing using principal stress line for toolpath planning in additive manufacturingJ. Manuf. Process.641420–33

[60] [60] Ren H L, Wang D, Liu G, Rosen D W and Xiong Y 2024 Concurrent optimization of structural topology and toolpath for additive manufacturing of continuous fiber-reinforced polymer compositesComput. Methods Appl. Mech. Eng.430117227

[61] [61] Stathatos E and Vosniakos G C 2019 Real-time simulation for long paths in laser-based additive manufacturing: a machine learning approachInt. J. Adv. Manuf. Technol.1041967–84

[62] [62] Yanamandra K, Chen G L, Xu X B, Mac G and Gupta N 2020 Reverse engineering of additive manufactured composite part by toolpath reconstruction using imaging and machine learningCompos. Sci. Technol.198108318

[63] [63] Qin M, Ding J H, Qu S, Song X, Wang C C L and Liao W H 2024 Deep reinforcement learning based toolpath generation for thermal uniformity in laser powder bed fusion processAddit. Manuf.79103937

[64] [64] Kim D H and Zohdi T I 2022 Tool path optimization of selective laser sintering processes using deep learningComput. Mech.69383–401

[65] [65] Zhou Z Y, Shen H Y, Lin J H, Liu B and Sheng X J 2022 Continuous tool-path planning for optimizing thermo-mechanical properties in wire-arc additive manufacturing: an evolutional methodJ. Manuf. Process.83354–73

[66] [66] Li L, McGuan R, Isaac R, Kavehpour P and Candler R 2021 Improving precision of material extrusion 3D printing byin-situmonitoring & predicting 3D geometric deviation using conditional adversarial networksAddit. Manuf.38101695

[67] [67] Zhou B and Tian T T 2021 A path planning method of lattice structural components for additive manufacturingInt. J. Adv. Manuf. Technol.1161467–90

[68] [68] Dong Y W and Hu B 2023 Optimized control method for fused deposition 3D printing slice contour path based on improved hopfield neural networkAppl. Artif. Intell.372219946

[69] [69] Nguyen L, Buhl J and Bambach M 2020 Continuous Eulerian tool path strategies for wire-arc additive manufacturing of rib-web structures with machine-learning-based adaptive void fillingAddit. Manuf.35101265

[70] [70] Kunchala B K R, Gamini S and Anilkumar T C 2023 Inclusion of IoT technology in additive manufacturing: machine learning-based adaptive bead modeling and path planning for sustainable wire arc additive manufacturing and process optimizationProc. Inst. Mech. Eng.C237120–32

[71] [71] Petrik J and Bambach M 2023 Reinforcement learning and optimization based path planning for thin-walled structures in wire arc additive manufacturingJ. Manuf. Process.9375–89

[72] [72] Sideris I, Duncan S, Fabbri M, Crivelli F, Afrasiabi M and Bambach M 2024 End-to-end path planning for homogeneous temperature fields in additive manufacturingJ. Mater. Process. Technol.327118364

[73] [73] Ren K, Chew Y, Liu N, Zhang Y F, Fuh J Y H and Bi G J 2021 Integrated numerical modelling and deep learning for multi-layer cube deposition planning in laser aided additive manufacturingVirtual Phys. Prototyp.16318–32

[74] [74] Qin M, Qu S, Ding J H, Song X, Gao S M, Wang C C L and Liao W H 2023 Adaptive toolpath generation for distortion reduction in laser powder bed fusion processAddit. Manuf.64103432

[75] [75] Ikeuchi D, Vargas-Uscategui A, Wu X F and King P C 2021 Data-efficient neural network for track profile modelling in cold spray additive manufacturingAppl. Sci.111654

[76] [76] Ikeuchi D, Vargas-Uscategui A, Wu X F and King P C 2024 Data-driven overlapping-track profile modeling in cold spray additive manufacturingJ. Therm. Spray Technol.33530–9

[77] [77] Mozaffar M, Ebrahimi A and Cao J 2020 Toolpath design for additive manufacturing using deep reinforcement learning (arXiv: 2009.14365)

[78] [78] Segovia Ramrez I, Garca Mrquez F P and Papaelias M 2023 Review on additive manufacturing and non-destructive testingJ. Manuf. Syst.66260–86

[79] [79] du Plessis A, Yadroitsava I and Yadroitsev I 2020 Effects of defects on mechanical properties in metal additive manufacturing: a review focusing on x-ray tomography insightsMater. Des.187108385

[80] [80] Du Plessis A, MacDonald E, Waller J M and Berto F 2021 Non-destructive testing of parts produced by laser powder bed fusionFundamentals of Laser Powder Bed Fusion of Metals(Additive Manufacturing Materials and Technologies) ed I Yadroitsev, I Yadroitsava, A du Plessis and E MacDonald (Elsevier) pp 277–300

[81] [81] Wong V W H, Ferguson M, Law K, Lee Y T and Witherell P 2022 Segmentation of additive manufacturing defects using U-NetJ. Comput. Inf. Sci. Eng.22031005

[82] [82] Ronneberger O, Fischer P and Brox T 2015. U-Net: convolutional networks for biomedical image segmentationProc. 18th Int. Conf. on Medical Image Computing and Computer-Assisted Intervention (MICCAI 2015)(Munich, Germany, 5–9October) (Springer) pp 234–41

[83] [83] iek , Abdulkadir A, Lienkamp S S, Brox T and Ronneberger O 2016 3D U-Net: learning dense volumetric segmentation from sparse annotatioProc. 19th Int. Conf. on Medical Image Computing and Computer-Assisted Intervention (MICCAI 2016)(Athens, Greece, 17–21October) (Springer) pp 424–32

[84] [84] Zamiela C, Jiang Z P, Stokes R, Tian Z H, Netchaev A, Dickerson C, Tian W M and Bian L K 2023 Deep multi-modal U-Net fusion methodology of thermal and ultrasonic images for porosity detection in additive manufacturingJ. Manuf. Sci. Eng.145061009

[85] [85] Aydogan B and Chou K 2024 Review ofin situdetection and ex situ characterization of porosity in laser powder bed fusion metal additive manufacturingMetals14669

[86] [86] AbouelNour Y and Gupta N 2024 Comparison ofin-situnondestructive testing and ex-situ methods in additive manufactured specimens for internal feature detectionRes. Nondestr. Eval.3520–31

[87] [87] Petsiuk A L and Pearce J M 2020 Open source computer vision-based layer-wise 3D printing analysisAddit. Manuf.36101473

[88] [88] Cannizzaro D, Varrella A G, Paradiso S, Sampieri R, Chen Y K, Macii A, Patti E and Cataldo S D 2022In-situdefect detection of metal additive manufacturing: an integrated frameworkIEEE Trans. Emerg. Top. Comput.1074–86

[89] [89] Brion D A J and Pattinson S W 2022 Generalisable 3D printing error detection and correction via multi-head neural networksNat. Commun.134654

[90] [90] Drissi-Daoudi R, Pandiyan V, Log R, Shevchik S, Masinelli G, Ghasemi-Tabasi H, Parrilli A and Wasmer K 2022 Differentiation of materials and laser powder bed fusion processing regimes from airborne acoustic emission combined with machine learningVirtual Phys. Prototyp.17181–204

[91] [91] Ye Z H, Liu C N, Tian W M and Kan C 2021In-situpoint cloud fusion for layer-wise monitoring of additive manufacturingJ. Manuf. Syst.61210–22

[92] [92] Lin W Y, Shen H Y, Fu J Z and Wu S Y 2019 Online quality monitoring in material extrusion additive manufacturing processes based on laser scanning technologyPrecis. Eng.6076–84

[93] [93] Chen H, Yaseer A and Zhang Y M 2022 Top surface roughness modeling for robotic wire arc additive manufacturingJ. Manuf. Mater. Process.639

[94] [94] Charalampous P, Kostavelis I, Kopsacheilis C and Tzovaras D 2021 Vision-based real-time monitoring of extrusion additive manufacturing processes for automatic manufacturing error detectionInt. J. Adv. Manuf. Technol.1153859–72

[95] [95] Dong W, Lian J, Yan C P, Zhong Y R, Karnati S, Guo Q L, Chen L Y and Morgan D 2024 Deep-learning-based segmentation of keyhole inin-situx-ray imaging of laser powder bed fusionMaterials17510

[96] [96] Cunningham R, Zhao C, Parab N, Kantzos C, Pauza J, Fezzaa K, Sun T and Rollett A D 2019 Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imagingScience363849–52

[97] [97] Shevchik S A, Masinelli G, Kenel C, Leinenbach C and Wasmer K 2019 Deep learning forin situand real-time quality monitoring in additive manufacturing using acoustic emissionIEEE Trans. Ind. Inform.155194–203

[98] [98] Waller J M, Parker B H, Hodges K L, Burke E R and Walker J L 2014Nondestructive Evaluation of Additive Manufacturing State-of-the-Disci Pline Report(NASA WSTF) (https://doi.org/10.1016/j.jaac.2014.05.004)

[99] [99] Ren Z S, Gao L, Clark S J, Fezzaa K, Shevchenko P, Choi A, Everhart W, Rollett A D, Chen L Y and Sun T 2023 Machine learning-aided real-time detection of keyhole pore generation in laser powder bed fusionScience37989–94

[100] [100] Wasmer K, Le-Quang T, Meylan B and Shevchik S A 2019In situquality monitoring in AM using acoustic emission: a reinforcement learning approachJ. Mater. Eng. Perform.28666–72

[101] [101] Shevchik S A, Kenel C, Leinenbach C and Wasmer K 2018 Acoustic emission forin situquality monitoring in additive manufacturing using spectral convolutional neural networksAddit. Manuf.21598–604

[102] [102] Muktadir M A, Hasan M N and Alam M 2022 Additive manufacturing and acoustic Emission: a brief reviewJ. Addit. Manuf. Technol.2632

[103] [103] Segovia Ramrez I, Das B and Garca Mrquez F P 2022 Fault detection and diagnosis in photovoltaic panels by radiometric sensors embedded in unmanned aerial vehiclesProg. Photovolt., Res. Appl.30240–56

[104] [104] Kononenko D Y, Nikonova V, Seleznev M, van den Brink J and Chernyavsky D 2023 Anin situcrack detection approach in additive manufacturing based on acoustic emission and machine learningAddit. Manuf. Lett.5100130

[105] [105] Mohammadi M G and Elbestawi M 2020 Real time monitoring in L-PBF using a machine learning approachProcedia Manuf.51725–31

[106] [106] Becker P, Roth C, Roennau A and Dillmann R 2020 Acoustic anomaly detection in additive manufacturing with long short-term memory neural networksProc. IEEE 7th Int. Conf. on Industrial Engineering and Applications (ICIEA 2020)(Bangkok, Thailand, 16–21April) (IEEE) pp 921–6

[107] [107] Wang S Y, Wang Y C, Liu C S and Mazumder J 2020In-situmonitoring on micro-hardness of laser molten zone on AISI4140 steel by spectral analysisSci. Rep.104241

[108] [108] Lough C S, Escano L I, Qu M L, Smith C C, Landers R G, Bristow D A, Chen L Y and Kinzel E C 2020In-situoptical emission spectroscopy of selective laser meltingJ. Manuf. Process.53336–41

[109] [109] Sun W B, Zhang Z H, Ren W J, Mazumder J and Jin J H 2022In situmonitoring of optical emission spectra for microscopic pores in metal additive manufacturingJ. Manuf. Sci. Eng.144011006

[110] [110] Choi J, Wooldridge M and Mazumder J 2023 Spectroscopy-based smart optical monitoring system in the applications of laser additive manufacturingJ. Laser Appl.35012030

[111] [111] Ren W J, Zhang Z F, Lu Y, Wen G R and Mazumder J 2021In-situmonitoring of laser additive manufacturing for Al7075 alloy using emission spectroscopy and plume imagingIEEE Access961671–9

[112] [112] Montazeri M, Nassar A R, Dunbar A J and Rao P 2019 In-process monitoring of porosity in additive manufacturing using optical emission spectroscopyIISE Trans.52500–15

[113] [113] Bian S J, Li C, Fu Y W, Ren Y T, Wu T Z, Li G P and Li B B 2021 Machine learning-based real-time monitoring system for smart connected worker to improve energy efficiencyJ. Manuf. Syst.6166–76

[114] [114] Li C, Bian S J, Wu T Z, Donovan R P and Li B B 2022 Affordable artificial intelligence-assisted machine supervision system for the small and medium-sized manufacturersSensors226246

[115] [115] Bian S J, Lin T C, Li C, Fu Y W, Jiang M R, Wu T Z, Hang X Y and Li B B 2021 Real-time object detection for smart connected worker in 3D printingProc. 21st Int. Conf. on Computational Science (ICCS 2021)(Krakow, Poland, 16–18 June) (Springer) pp 554–67

[116] [116] Manivannan S 2023 Automatic quality inspection in additive manufacturing using semi-supervised deep learningJ. Intell. Manuf.343091–108

[117] [117] Song H, Li C X, Fu Y H, Li R S, Zhang H Q and Wang G L 2023 A two-stage unsupervised approach for surface anomaly detection in wire and arc additive manufacturingComput. Ind.151103994

[118] [118] Chen A, Kopsaftopoulos F and Mishra S 2024 An unsupervised online anomaly detection method for metal additive manufacturing processes via a statistical time-frequency domain algorithmStruct. Health Monit.231926–48

[119] [119] Lui C F, Maged A and Xie M 2024 A novel image feature based self-supervised learning model for effective quality inspection in additive manufacturingJ. Intell. Manuf.353543–58

[120] [120] Mattera G, Polden J, Caggiano A, Nele L, Pan Z X and Norrish J 2024 Semi-supervised learning for real-time anomaly detection in pulsed transfer wire arc additive manufacturingJ. Manuf. Process.12884–97

[121] [121] Gunasegaram D R, Barnard A S, Matthews M J, Jared B H, Andreaco A M, Bartsch K and Murphy A B 2024 Machine learning-assistedin-situadaptive strategies for the control of defects and anomalies in metal additive manufacturingAddit. Manuf.81104013

[122] [122] Oleff A, Kster B and Overmeyer L 2024 Determination of quality classes for material extrusion additive manufacturing using image processingInt. J. Adv. Manuf. Technol.1321585–98

[123] [123] Akhavan J, Lyu J and Manoochehri S 2024 A deep learning solution for real-time quality assessment and control in additive manufacturing using point cloud dataJ. Intell. Manuf.351389–406

[124] [124] Chen L Q, Yao X L, Xu P, Moon S K and Bi G J 2021 Rapid surface defect identification for additive manufacturing within-situpoint cloud processing and machine learningVirtual Phys. Prototyp.1650–67

[125] [125] Chen L Q, Bi G J, Yao X L, Tan C L, Su J L, Ng N P H, Chew Y, Liu K and Moon S K 2023 Multisensor fusion-based digital twin for localized quality prediction in robotic laser-directed energy depositionRob. Comput. Integr. Manuf.84102581

[126] [126] Lee E T, Fan Z Y and Sencer B 2023 A new approach to detect surface defects from 3D point cloud data with surface normal Gabor filter (SNGF)J. Manuf. Process.92196–205

[127] [127] Chew S Y, Asadi E, Vargas-Uscategui A, King P, Gautam S, Bab-Hadiashar A and Cole I 2024 In-process 4D reconstruction in robotic additive manufacturingRob. Comput. Integr. Manuf.89102784

[128] [128] Zhao C, Fezzaa K, Cunningham R W, Wen H D, De Carlo F, Chen L, Rollett A D and Sun T 2017 Real-time monitoring of laser powder bed fusion process using high-speed x-ray imaging and diffractionSci. Rep.73602

[129] [129] Guo Q L, Zhao C, Escano L I, Young Z, Xiong L H, Fezzaa K, Everhart W, Brown B, Sun T and Chen L Y 2018 Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed byin-situhigh-speed high-energy x-ray imagingActa Mater.151169–80

[130] [130] Leung C L A, Marussi S, Atwood R C, Towrie M, Withers P J and Lee P D 2018In situx-ray imaging of defect and molten pool dynamics in laser additive manufacturingNat. Commun.91355

[131] [131] Qin X B, Fan D P, Huang C Y, Diagne C, Zhang Z C, Sant'Anna A C, Surez A, Jagersand M and Shao L 2021 Boundary-aware segmentation network for mobile and web applications (arXiv: 2101.04704)

[132] [132] Fernandez-Zelaia P, Dryepondt S N, Ziabari A K and Kirka M M 2024 Self-supervised learning of spatiotemporal thermal signatures in additive manufacturing using reduced order physics models and transformersComput. Mater. Sci.232112603

[133] [133] Li W, Lambert-Garcia R, Getley A C M, Kim K, Bhagavath S, Majkut M, Rack A, Lee P D and Leung C L A 2024 AM-SegNet for additive manufacturingin situx-ray image segmentation and feature quantificationVirtual Phys. Prototyp.19e2325572

[134] [134] Shin S J, Lee J H, Jadhav S and Kim D B 2024 Material-adaptive anomaly detection using property-concatenated transfer learning in wire arc additive manufacturingInt. J. Precis. Eng. Manuf.25383–408

[135] [135] Hossain M S and Taheri H 2020In situprocess monitoring for additive manufacturing through acoustic techniquesJ. Mater. Eng. Perform.296249–62

[136] [136] Wang H J, Li B and Xuan F Z 2022 Acoustic emission forin situprocess monitoring of selective laser melting additive manufacturing based on machine learning and improved variational modal decompositionInt. J. Adv. Manuf. Technol.1222277–92

[137] [137] Mathieu M, Henaff M and LeCun Y 2014 Fast training of convolutional networks through FFTsProc.2nd Int. Conf. on Learning Representations (ICLR 2014)(Banff, Canada, 14–16 April) (ICLR) (https://doi.org/10.48550/arXiv.1312.5851)

[138] [138] Taheri H, Koester L W, Bigelow T A, Faierson E J and Bond L J 2019In situadditive manufacturing process monitoring with an acoustic technique: clustering performance evaluation using K-means algorithmJ. Manuf. Sci. Eng.141041011

[139] [139] Pandiyan V, Wrbel R, Richter R A, Leparoux M, Leinenbach C and Shevchik S 2024 Monitoring of Laser Powder Bed Fusion process by bridging dissimilar process maps using deep learning-based domain adaptation on acoustic emissionsAddit. Manuf.80103974

[140] [140] Song J Y, Dass A, Moridi A and McLaskey G C 2024 Detection of defects during laser-powder interaction by acoustic emission sensors and signal characteristicsAddit. Manuf.82104035

[141] [141] Ren W J, Wen G R, Zhang Z F and Mazumder J 2022 Quality monitoring in additive manufacturing using emission spectroscopy and unsupervised deep learningMater. Manuf. Process.371339–46

[142] [142] Liu H L, Gobert C, Ferguson K, Abranovic B, Chen H R, Beuth J L, Rollett A D and Kara L B 2024 Inference of highly time-resolved melt pool visual characteristics and spatially-dependent lack-of-fusion defects in laser powder bed fusion using acoustic and thermal emission dataAddit. Manuf.83104057

[143] [143] Petrich J, Snow Z, Corbin D and Reutzel E W 2021 Multi-modal sensor fusion with machine learning for data-driven process monitoring for additive manufacturingAddit. Manuf.48102364

[144] [144] Chen L Q, Yao X L, Feng W H, Chew Y and Moon S K 2023 Multimodal sensor fusion for real-time location-dependent defect detection in laser-directed energy depositionProc. ASME 2023 Int. Design Engineering Technical Conf. and Computers and Information in Engineering Conf.(Boston, Massachusetts, USA, 20–23 August) (American Society of Mechanical Engineers) pp DETC2023–110284

[145] [145] Vandone A, Baraldo S and Valente A 2018 Multisensor data fusion for additive manufacturing process controlIEEE Rob. Autom. Lett.33279–84

[146] [146] Li J C, Zhou Q, Cao L C, Wang Y Z and Hu J X 2022 A convolutional neural network-based multi-sensor fusion approach forin-situquality monitoring of selective laser meltingJ. Manuf. Syst.64429–42

[147] [147] Grasso M, Gallina F and Colosimo B M 2018 Data fusion methods for statistical process monitoring and quality characterization in metal additive manufacturingProcedia CIRP75103–7

[148] [148] Moretti M, Bianchi F and Senin N 2020 Towards the development of a smart fused filament fabrication system using multi-sensor data fusion for in-process monitoringRapid Prototyp. J.261249–61

[149] [149] Li J C, Zhang X G, Zhou Q, Chan F T S and Hu Z 2022 A feature-level multi-sensor fusion approach forin-situquality monitoring of selective laser meltingJ. Manuf. Process.84913–26

[150] [150] Li W J, Mac G, Tsoutsos N G, Gupta N and Karri R 2020 Computer aided design (CAD) model search and retrieval using frequency domain file conversionAddit. Manuf.36101554

[151] [151] Hou J H, Luo C Q, Qin F W, Shao Y L and Chen X X 2023 FuS-GCN: efficient B-rep based graph convolutional networks for 3D-CAD model classification and retrievalAdv. Eng. Inform.56102008

[152] [152] Nyberg E L, Farris A L, Hung B P, Dias M, Garcia J R, Dorafshar A H and Grayson W L 2017 3D-Printing Technologies for Craniofacial Rehabilitation, Reconstruction, and RegenerationAnn. Biomed. Eng.4545–57

[153] [153] Zheng Y F, Qureshi A J and Ahmad R 2018 Algorithm for remanufacturing of damaged parts with hybrid 3D printing and machining processManuf. Lett.1538–41

[154] [154] Kim H, Cha M, Kim B C, Lee I and Mun D 2019 Maintenance framework for repairing partially damaged parts using 3D printingInt. J. Precis. Eng. Manuf.201451–64

[155] [155] Yeon J, Kang J L and Yan W 2018 Spall damage repair using 3D printing technologyAutom. Constr.89266–74

[156] [156] Mildenhall B, Srinivasan P P, Tancik M, Barron J T, Ramamoorthi R and Ng R 2021 NeRF: representing scenes as neural radiance fields for view synthesisCommun. ACM6599–106

[157] [157] Kerbl B, Kopanas G, Leimkuehler T and Drettakis G 2023 3D Gaussian splatting for real-time radiance field renderingACM Trans. Graph.42139

[158] [158] Siddiqui Y, Alliegro A, Artemov A, Tommasi T, Sirigatti D, Rosov V, Dai A and NieBner M 2024 MeshGPT: generating triangle meshes with decoder-only transformersProc. 2024 IEEE CVPR(Seattle, WA, USA, 17–21 June) (IEEE) pp 19615–25

[159] [159] Lin C H, Gao J, Tang L M, Takikawa T, Zeng X H, Huang X, Kreis K, Fidler S, Liu M Y and Lin T Y 2023 Magic3D: high-resolution text-to-3D content creationProc. 2023 IEEE CVPR(Vancouver, BC, Canada, 17–24 June) (IEEE) pp 300–9

[160] [160] Xu J L, Wang X T, Cheng W H, Cao Y P, Shan Y P, Qie X H and Gao S H 2023 Dream3D: zero-shot text-to-3D synthesis using 3D shape prior and text-to-image diffusion modelsProc. 2023 IEEE/CVF Conf. on Computer Vision and Pattern Recognition(IEEE) pp 20908–18

[161] [161] Yi H, Zheng Z D, Xu X Y and Chua T S 2023 Progressive text-to-3D generation for automatic 3D prototyping (arXiv: 2309.14600)

[162] [162] Long X Xet al2024 Wonder3D: single image to 3D using cross-domain diffusionProc. IEEE/CVF Conf. on Computer Vision and Pattern Recognition (CVPR 2024)(Seattle, WA, USA, 16–22 June) (IEEE) pp 9970–80

[163] [163] Liu M H, Xu C, Jin H A, Chen L H, Varma T M, Xu Z X and Su H 2023 One-2-3-45: any single image to 3D mesh in 45 seconds without per-shape optimizationProc. 37th Int. Conf. on Neural Information Processing Systems (NIPS‘23)(New Orleans, LA, USA, 10–16December) vol 976 (Curran Associates Inc.) pp 22226–46

[164] [164] Hui K H, Sanghi A, Rampini A, Rahimi Malekshan K, Liu Z Z, Shayani H and Fu C W 2024 Make-A-Shape: a ten-million-scale 3D shape modelProc. 41st Int. Conf. on Machine Learning(Vienna, Austria, 21–27 July) vol 235 (PMLR) pp 20660–81 (available at: https://proceedings.mlr.press/v235/hui24a.html)

[165] [165] Liu C N, Tian W M and Kan C 2022 When AI meets additive manufacturing: challenges and emerging opportunities for human-centered products developmentJ. Manuf. Syst.64648–56

[166] [166] Gokuldoss P K, Kolla S and Eckert J 2017 Additive manufacturing processes: selective laser melting, electron beam melting and binder jetting-selection guidelinesMaterials10672

[167] [167] Mananares C G, de S. Zancul E, Cavalcante da Silva J and Cauchick Miguel P A 2015 Additive manufacturing process selection based on parts' selection criteriaInt. J. Adv. Manuf. Technol.801007–14

[168] [168] Fera M, Fruggiero F, Costabile G, Lambiase A and Pham D T 2017 A new mixed production cost allocation model for additive manufacturing (MiProCAMAM)Int. J. Adv. Manuf. Technol.924275–91

[169] [169] Ribeiro I, Matos F, Jacinto C, Salman H, Cardeal G, Carvalho H, Godina R and Peas P 2020 Framework for life cycle sustainability assessment of additive manufacturingSustainability12929

[170] [170] Zaman U K U, Rivette M, Siadat A and Mousavi S M 2018 Integrated product-process design: material and manufacturing process selection for additive manufacturing using multi-criteria decision makingRob. Comput. Integr. Manuf.51169–80

[171] [171] Liu W, Zhu Z C and Ye S H 2020 A decision-making methodology integrated in product design for additive manufacturing process selectionRapid Prototyp. J.26895–909

[172] [172] Ren D Q, Choi J K and Schneider K 2022 A multicriteria decision-making method for additive manufacturing process selectionRapid Prototyp. J.2877–91

[173] [173] Ghuge S and Akarte M 2024 Additive manufacturing process root selection using bayesian networkProcedia Comput. Sci.232698–707

[174] [174] Jiang J C, Xiong Y, Zhang Z Y and Rosen D W 2022 Machine learning integrated design for additive manufacturingJ. Intell. Manuf.331073–86

[175] [175] Ackermann M and Haase C 2023 Machine learning-based identification of interpretable process-structure linkages in metal additive manufacturingAddit. Manuf.71103585

[176] [176] Saunders R N, Teferra K, Elwany A, Michopoulos J G and Lagoudas D 2023 Metal AM process-structure-property relational linkages using Gaussian process surrogatesAddit. Manuf.62103398

[177] [177] Ko H, Lu Y, Yang Z, Ndiaye N Y and Witherell P 2023 A framework driven by physics-guided machine learning for process-structure-property causal analytics in additive manufacturingJ. Manuf. Syst.67213–28

[178] [178] Liu Q, Chen W L, Yakubov V, Kruzic J J, Wang C H and Li X P 2024 Interpretable machine learning approach for exploring process-structure-property relationships in metal additive manufacturingAddit. Manuf.85104187

[179] [179] Wang C, Tan X P, Tor S B and Lim C S 2020 Machine learning in additive manufacturing: state-of-the-art and perspectivesAddit. Manuf.36101538

[180] [180] Pilania G, Wang C C, Jiang X, Rajasekaran S and Ramprasad R 2013 Accelerating materials property predictions using machine learningSci. Rep.32810

[181] [181] Johnson N S, Vulimiri P S, To A C, Zhang X, Brice C A, Kappes B B and Stebner A P 2020 Invited review: machine learning for materials developments in metals additive manufacturingAddit. Manuf.36101641

[182] [182] Yang C, Ren C, Jia Y F, Wang G, Li M J and Lu W C 2022 A machine learning-based alloy design system to facilitate the rational design of high entropy alloys with enhanced hardnessActa Mater.222117431

[183] [183] Zou C Xet al2021 Integrating data mining and machine learning to discover high-strength ductile titanium alloysActa Mater.202211–21

[184] [184] Rao Z Yet al2022 Machine learning-enabled high-entropy alloy discoveryScience37878–85

[185] [185] Motaman S A H, Kies F, Khnen P, Ltang M, Lin M X, Molotnikov A and Haase C 2020 Optimal design for metal additive manufacturing: an integrated computational materials engineering (ICME) approachJOM721092–104

[186] [186] Wang X and Xiong W 2020 Uncertainty quantification and composition optimization for alloy additive manufacturing through a CALPHAD-based ICME frameworknpj Comput. Mater.6188

[187] [187] Chia H Y, Wu J Z, Wang X Z and Yan W T 2022 Process parameter optimization of metal additive manufacturing: a review and outlookJ. Mater. Inform.216

[188] [188] Liu Y, Liu C, Liu W S, Ma Y Z, Tang S W, Liang C P, Cai Q S and Zhang C 2019 Optimization of parameters in laser powder deposition AlSi10Mg alloy using Taguchi methodOpt. Laser Technol.111470–80

[189] [189] Liu Z X, Li M Y, Weng Y W, Qian Y, Wong T N and Tan M J 2020 Modelling and parameter optimization for filament deformation in 3D cementitious material printing using support vector machineCompositesB193108018

[190] [190] Zou M, Jiang W G, Qin Q H, Liu Y C and Li M L 2022 Optimized XGBoost model with small dataset for predicting relative density of Ti-6Al-4V parts manufactured by selective laser meltingMaterials155298

[191] [191] Costa A, Buffa G, Palmeri D, Pollara G and Fratini L 2022 Hybrid prediction-optimization approaches for maximizing parts density in SLM of Ti6Al4V titanium alloyJ. Intell. Manuf.331967–89

[192] [192] Liu R, Liu S and Zhang X L 2021 A physics-informed machine learning model for porosity analysis in laser powder bed fusion additive manufacturingInt. J. Adv. Manuf. Technol.1131943–58

[193] [193] Smoqi Z, Gaikwad A, Bevans B, Kobir M H, Craig J, Abul-Haj A, Peralta A and Rao P 2022 Monitoring and prediction of porosity in laser powder bed fusion using physics-informed meltpool signatures and machine learningJ. Mater. Process. Technol.304117550

[194] [194] Lao W X, Li M Y, Wong T N, Tan M J and Tjahjowidodo T 2020 Improving surface finish quality in extrusion-based 3D concrete printing using machine learning-based extrudate geometry controlVirtual Phys. Prototyp.15178–93

[195] [195] Sharma P, Vaid H, Vajpeyi R, Shubham P, Agarwal K M and Bhatia D 2022 Predicting the dimensional variation of geometries produced through FDM 3D printing employing supervised machine learningSens. Int.3100194

[196] [196] Khorasani A M, Gibson I, Ghasemi A and Ghaderi A 2020 Modelling of laser powder bed fusion process and analysing the effective parameters on surface characteristics of Ti-6Al-4VInt. J. Mech. Sci.168105299

[197] [197] Shirmohammadi M, Goushchi S J and Keshtiban P M 2021 Optimization of 3D printing process parameters to minimize surface roughness with hybrid artificial neural network model and particle swarm algorithmProg. Addit. Manuf.6199–215

[198] [198] Qin J, Liu Y, Grosvenor R, Lacan F and Jiang Z G 2020 Deep learning-driven particle swarm optimisation for additive manufacturing energy optimisationJ. Clean. Prod.245118702

[199] [199] Barrionuevo G O, Ramos-Grez J A, Walczak M and Betancourt C A 2021 Comparative evaluation of supervised machine learning algorithms in the prediction of the relative density of 316L stainless steel fabricated by selective laser meltingInt. J. Adv. Manuf. Technol.113419–33

[200] [200] Nguyen P D, Nguyen T Q, Tao Q B, Vogel F and Nguyen-Xuan H 2022 A data-driven machine learning approach for the 3D printing process optimisationVirtual Phys. Prototyp.17768–86

[201] [201] Tamir T S, Xiong G, Fang Q H, Yang Y, Shen Z, Zhou M C and Jiang J C 2023 Machine-learning-based monitoring and optimization of processing parameters in 3D printingInt. J. Comput. Integr. Manuf.361362–78

[202] [202] Park H S, Nguyen D S, Le-Hong T and Van Tran X 2022 Machine learning-based optimization of process parameters in selective laser melting for biomedical applicationsJ. Intell. Manuf.331843–58

[203] [203] Pham T Q D, Hoang T V, Van Tran X, Pham Q T, Fetni S, Duchˆene L, Tran H S and Habraken A M 2023 Fast and accurate prediction of temperature evolutions in additive manufacturing process using deep learningJ. Intell. Manuf.341701–19

[204] [204] Shi S, Liu X W, Wang Z, Chang H, Wu Y N, Yang R and Zhai Z R 2024 An intelligent process parameters optimization approach for directed energy deposition of nickel-based alloys using deep reinforcement learningJ. Manuf. Process.1201130–40

[205] [205] Liao S H, Xue T J, Jeong J, Webster S, Ehmann K and Cao J 2023 Hybrid thermal modeling of additive manufacturing processes using physics-informed neural networks for temperature prediction and parameter identificationComput. Mech.72499–512

[206] [206] Kapusuzoglu B and Mahadevan S 2020 Physics-informed and hybrid machine learning in additive manufacturing: application to fused filament fabricationJOM724695–705

[207] [207] Nagarajan H P N, Mokhtarian H, Jafarian H, Dimassi S, Bakrani-Balani S, Hamedi A, Coatana E, Gary Wang G and Haapala K R 2019 Knowledge-based design of artificial neural network topology for additive manufacturing process modeling: a new approach and case study for fused deposition modelingJ. Mech. Des.141021705

[208] [208] Liu S, Stebner A P, Kappes B B and Zhang X L 2021 Machine learning for knowledge transfer across multiple metals additive manufacturing printersAddit. Manuf.39101877

[209] [209] Venugopal V and Anand S 2023 Structural and thermal generative design using reinforcement learning-based search strategy for additive manufacturingManuf. Lett.35564–75

[210] [210] Vagenas S and Panoutsos G 2023 Stability in reinforcement learning process control for additive manufacturingIFAC-PapersOnLine564719–24

[211] [211] Del Real Torres A, Andreiana D S, Ojeda Roldn , Hernndez Bustos A and Acevedo Galicia L E 2022 A review of deep reinforcement learning approaches for smart manufacturing in industry 4.0 and 5.0 frameworkAppl. Sci.1212377

[212] [212] Gunasegaram D R, Murphy A B, Barnard A, DebRoy T, Matthews M J, Ladani L and Gu D 2021 Towards developing multiscale-multiphysics models and their surrogates for digital twins of metal additive manufacturingAddit. Manuf.46102089

[213] [213] Guo S H, Agarwal M, Cooper C, Tian Q, Gao R X, Guo W H and Guo Y B 2022 Machine learning for metal additive manufacturing: towards a physics-informed data-driven paradigmJ. Manuf. Syst.62145–63

[214] [214] Baturynska I, Semeniuta O and Martinsen K 2018 Optimization of process parameters for powder bed fusion additive manufacturing by combination of machine learning and finite element method: a conceptual frameworkProcedia CIRP67227–32

[215] [215] Azizzadenesheli K, Kovachki N, Li Z Y, Liu-Schiaffini M, Kossai fiJ and Anandkumar A 2024 Neural operators for accelerating scientific simulations and designNat. Rev. Phys.6320–8

[216] [216] Mbow M M, Grandvallet C, Vignat F, Marin P R, Perry N and Pourroy F 2022 Mathematization of experts knowledge: example of part orientation in additive manufacturingJ. Intell. Manuf.331209–27

[217] [217] Liu X, Erkoyuncu J A, Fuh J Y H, Lu W F and Li B B 2025 Knowledge extraction for additive manufacturing process via named entity recognition with LLMsRob. Comput. Integr. Manuf.93102900

[218] [218] Abdollahi S, Davis A, Miller J H and Feinberg A W 2018 Expert-guided optimization for 3D printing of soft and liquid materialsPLoS One13e0194890

[219] [219] Wang Y B, Blache R, Zheng P and Xu X 2018 A knowledge management system to support design for additive manufacturing using Bayesian networksJ. Mech. Des.140051701

[220] [220] Peng X, Kong L B, Fuh J Y H and Wang H 2021 A review of post-processing technologies in additive manufacturingJ. Manuf. Mater. Process.538

[221] [221] George A, Ali M and Papakostas N 2021 Utilising robotic process automation technologies for streamlining the additive manufacturing design work flowCIRP Ann.70119–22

[222] [222] Nelaturi S, Behandish M, Mirzendehdel A M and de Kleer J 2019 Automatic support removal for additive manufacturing post processingComput.-Aided Des.115135–46

[223] [223] Vaidya R and Anand S 2016 Image processing assisted tools for pre- and post-processing operations in additive manufacturingProcedia Manuf.5958–73

[224] [224] Chen H, Joglekar A, Whitefoot K S and Burak Kara L 2023 Concurrent build direction, part segmentation, and topology optimization for additive manufacturing using neural networksJ. Mech. Des.145091702

[225] [225] Jannesari Ladani L 2021 Applications of artificial intelligence and machine learning in metal additive manufacturingJ. Phys. Mater.4042009

[226] [226] Oh Y, Witherell P, Lu Y and Sprock T 2020 Nesting and scheduling problems for additive manufacturing: a taxonomy and reviewAddit. Manuf.36101492

[227] [227] Pinto M, Silva C, Threr M and Moniz S 2024 Nesting and scheduling optimization of additive manufacturing systems: mapping the territoryComput. Oper. Res.165106592

[228] [228] Yamashiro H and Nonaka H 2021 Estimation of processing time using machine learning and real factory data for optimization of parallel machine scheduling problemOper. Res. Perspect.8100196

[229] [229] Ying K C and Lin S W 2023 Minimizing makespan in two-stage assembly additive manufacturing: a reinforcement learning iterated greedy algorithmAppl. Soft Comput.138110190

[230] [230] Alicastro M, Ferone D, Festa P, Fugaro S and Pastore T 2021 A reinforcement learning iterated local search for makespan minimization in additive manufacturing machine scheduling problemsComput. Oper. Res.131105272

[231] [231] Morariu C, Morariu O, R˘aileanu S and Borangiu T 2020 Machine learning for predictive scheduling and resource allocation in large scale manufacturing systemsComput. Ind.120103244

[232] [232] Wang Y B, Zheng P, Xu X, Yang H Y and Zou J 2019 Production planning for cloud-based additive manufacturing—a computer vision-based approachRob. Comput. Integr. Manuf.58145–57

[233] [233] Mashhadi F and Salinas Monroy S A 2020 Deep learning for optimal resource allocation in IoT-enabled additive manufacturingProc. 2020 IEEE 6th WF-IoT(New Orleans, Louisiana, USA, 6–9April) (IEEE) pp 1–6

[234] [234] Zehetner D and Gansterer M 2022 The collaborative batching problem in multi-site additive manufacturingInt. J. Prod. Econ.248108432

[235] [235] Hsu Y C, Yang Z Z and Buehler M J 2022 Generative design, manufacturing, and molecular modeling of 3D architected materials based on natural language inputAPL Mater.10041107

[236] [236] Yang Z Z and Buehler M J 2021 Words to matter: de novo architected materials design using transformer neural networksFront. Mater.8740754

[237] [237] Kumar A and Starly B 2022“FabNER”: information extraction from manufacturing process science domain literature using named entity recognitionJ. Intell. Manuf.332393–407

[238] [238] Fan H L, Fuh J, Lu W F, Kumar A S and Li B B 2024 Unleashing the potential of large language models for knowledge augmentation: a practical experiment on incremental sheet formingProcedia Comput. Sci.2321269–78

[239] [239] Caglar T R, Andrushchenko E, Mayer J and Jochem R 2023 Estimation of fused deposition modelling failure from open community data with natural language processProcedia CIRP1201226–31

[240] [240] Fan H L, Liu X, Fuh J Y H, Lu W F and Li B B 2024 Embodied intelligence in manufacturing: leveraging large language models for autonomous industrial roboticsJ. Intell. Manuf.1–17

[241] [241] Ostrander J K, Tucker C S, Simpson T W and Meisel N A 2020 Evaluating the use of virtual reality to teach introductory concepts of additive manufacturingJ. Mech. Des.142051702

[242] [242] Cai Y, Wang Y and Burnett M 2020 Using augmented reality to build digital twin for reconfigurable additive manufacturing systemJ. Manuf. Syst.56598–604

[243] [243] Fan H L, Zhang H J, Ma C Y, Wu T Z, Fuh J Y H and Li B B 2024 Enhancing metal additive manufacturing training with the advanced vision language model: a pathway to immersive augmented reality training for non-expertsJ. Manuf. Syst.75257–69

[244] [244] Chheang V, Weston B T, Cerda R W, Au B, Giera B, Bremer P T and Miao H C 2024 A virtual environment for collaborative inspection in additive manufacturingProc. 2017 CHI Conf. Extended Abstracts on Human Factors in Computing Systems(Honolulu, HI, USA, 11–16 May) vol 26 (Association for Computing Machinery) pp 1–7

[245] [245] Mourtzis D, Angelopoulos J and Panopoulos N 2021 Collaborative manufacturing design: a mixed reality and cloud-based framework for part designProcedia CIRP10097–102

[246] [246] Mourtzis D, Angelopoulos J and Panopoulos N 2022 Integration of mixed reality to CFD in industry 4.0: a manufacturing design paradigmProcedia CIRP1071144–9

[247] [247] Malik A, Lhachemi H and Shorten R 2020 I-nteract: a cyber-physical system for real-time interaction with physical and virtual objects using mixed reality technologies for additive manufacturingIEEE Access898761–74

[248] [248] Zheng P, Li C X, Fan J M and Wang L H 2024 A vision-language-guided and deep reinforcement learning-enabled approach for unstructured human-robot collaborative manufacturing task fulfilmentCIRP Ann.73341–4

[249] [249] Xiong Y, Tang Y L, Kim S and Rosen D W 2023 Human-machine collaborative additive manufacturingJ. Manuf. Syst.6682–91

[250] [250] Batra R, Song L and Ramprasad R 2020 Emerging materials intelligence ecosystems propelled by machine learningNat. Rev. Mater.6655–78

[251] [251] Xia K S, Saidy C, Kirkpatrick M, Anumbe N, Sheth A and Harik R 2021 Towards semantic integration of machine vision systems to aid manufacturing event understandingSensors214276

[252] [252] Gao H H, Jiang W Y, Ran Q H Z and Wang Y 2024 Vision-language interaction via contrastive learning for surface anomaly detection in consumer electronics manufacturingIEEE Trans. Consum. Electron.706119–30

[253] [253] Chow Eet al2024 Collaborative moonwalkersProc. 2024 IEEE Aerospace Conf.(Big Sky, Montana, USA, 2–9 March) (IEEE) pp 1–15

[254] [254] Tang Y F, Rahmani Dehaghani M and Wang G G 2023 Review of transfer learning in modeling additive manufacturing processesAddit. Manuf.61103357

[255] [255] Cheng L W, Tsung F and Wang A D 2017 A statistical transfer learning perspective for modeling shape deviations in additive manufacturingIEEE Rob. Autom. Lett.21988–93

[256] [256] Pandiyan V, Drissi-Daoudi R, Shevchik S, Masinelli G, Le-Quang T, Log R and Wasmer K 2022 Deep transfer learning of additive manufacturing mechanisms across materials in metal-based laser powder bed fusion processJ. Mater. Process. Technol.303117531

[257] [257] Huang X F, Xie T L, Wang Z, Chen L, Zhou Q and Hu Z 2022 A transfer learning-based multi-fidelity point-cloud neural network approach for melt pool modeling in additive manufacturingASCE-ASME J. Risk Uncertain. Eng. Syst.B8011104

[258] [258] Caiazzo F and Alfieri V 2019 Simulation of laser-assisted directed energy deposition of aluminum powder: prediction of geometry and temperature evolutionMaterials122100

[259] [259] Zhao W S, Queralta J P and Westerlund T 2020 Sim-to-real transfer in deep reinforcement learning for robotics: a surveyProc. 2020 IEEE Symp. Series on Computational Intelligence(Canberra, Australia, 1–4 December) (IEEE) pp 737–44

[260] [260] Ahmmed Bet al2024 Deep learning with mixup augmentation for improved pore detection during additive manufacturingSci. Rep.1413365

[261] [261] Conrad J, Rodriguez S, Omidvarkarjan D, Ferchow J and Meboldt M 2023 Recognition of additive manufacturing parts based on neural networks and synthetic training data: a generalized end-to-end workflowAppl. Sci.1312316

[262] [262] Liang Wong S J, Chen C X, Tan E Z E and Li H 2024 Integration of physics-based data in deep learning model training for predicting the effect of sulfur content in the directed energy deposition processInt. J. AI Mater. Des.144

[263] [263] Mehta M and Shao C H 2022 Federated learning-based semantic segmentation for pixel-wise defect detection in additive manufacturingJ. Manuf. Syst.64197–210

[264] [264] Paramartha Putra M A, Verana M, Sampedro G A, Kim D S and Lee J M 2022 3DFed: a secure federated learning-based system for fault detection in 3D printer industryProc. 2022 13th Int. Conf. on Information and Communication Technology Convergence (ICTC)(Jeju Island, Republic of Korea, 19–21 October) (IEEE) pp 1459–62

[265] [265] Shi N C and Kontar R A 2023 Personalized federated learning via domain adaptation with an application to distributed 3D printingTechnometrics65328–39

[266] [266] Zhang K Q, Yang Z R and Baar T 2021 Multi-agent reinforcement learning: a selective overview of theories and algorithmsHandbook of Reinforcement Learning and Control(Studies in Systems, Decision and Control) vol 325, ed K G Vamvoudakis, Y Wan, F L Lewis and D Cansever (Springer) pp 321–84

[267] [267] Bahrpeyma F and Reichelt D 2022 A review of the applications of multi-agent reinforcement learning in smart factoriesFront. Robot.AI91027340

[268] [268] Zheng P, Xia L Q, Li C X, Li X Y and Liu B F 2021 Towards Self-X cognitive manufacturing network: an industrial knowledge graph-based multi-agent reinforcement learning approachJ. Manuf. Syst.6116–26

[269] [269] Alam M F, Shtein M, Barton K and Hoelzle D 2023 Reinforcement learning enabled autonomous manufacturing using transfer learning and probabilistic reward modelingIEEE Control Syst. Lett.7508–13

[270] [270] Liu H T, Li C Y, Wu Q Y and Lee Y J 2023 Visual instruction tuningProc. Advances in Neural Information Proc. Systems (NeurIPS 2023)(New Orleans, Louisiana, USA, 10–16 December) vol 36 (Curran Associates Inc.) p 1516 (available at: https://proceedings.neurips.cc/paper_files/paper/2023/file/6dcf277ea32ce3288914faf369fe6de0-Paper-Conference.pdf)

[271] [271] Picard C, Edwards K M, Doris A C, Man B, Giannone G, Alam M F and Ahmed F 2023 From concept to manufacturing: evaluating vision-language models for engineering design (arXiv: 2311.12668)

[272] [272] Bardes A, Garrido Q, Ponce J, Chen X L, Rabbat M, LeCun Y, Assran M and Ballas N 2024 Revisiting feature prediction for learning visual representations from video (arXiv: 2404.08471)

[273] [273] Wan X, Liu L L, Feng B W, Chen C and Wang Y 2021 Research on multi-modal data cross-media perception fusion algorithm based on digital twinAdvanced Manufacturing and Automation Xvol 737, ed X Y Des Wang, K Martinsen, T Yu and K S Wang (Springer) pp 221–9

[274] [274] Liu L L, Wan X, Gao Z G and Zhang X Y 2023 An improved MPGA-ACO-BP algorithm and comprehensive evaluation system for intelligence workshop multi-modal data fusionAdv. Eng. Inform.56101980

[275] [275] Wang K, Song Y Y, Sheng H S, Xu J H, Zhang S Y and Qin J 2022 Energy efficiency design for eco-friendly additive manufacturing based on multimodal attention fusionJ. Manuf. Process.79720–30

[276] [276] Biehler M, Li J and Shi J J 2024 FUSION3D: multimodal data fusion for 3D shape reconstruction: a soft-sensing approachIISE Transactionspp 1–15

[277] [277] Bauer F, Schrapp M and Szijarto J 2019 Accuracy analysis of a piece-to-piece reverse engineering workflow for a turbine foil based on multi-modal computed tomography and additive manufacturingPrecis. Eng.6063–75

[278] [278] Pan S R, Luo L H, Wang Y F, Chen C, Wang J P and Wu X D 2024 Unifying large language models and knowledge graphs: a roadmapIEEE Trans. Knowl. Data Eng.363580–99

[279] [279] Lewis Pet al2020 Retrieval-augmented generation for knowledge-intensive NLP tasksProc. 34th Int. Conf. on Neural Information Processing Systems(Vancouver, BC, Canada, 6–12December) (Curran Associates Inc.) pp 9459–74

[280] [280] Hu E J, Shen Y L, Wallis P, Allen-Zhu Z, Li Y Z, Wang S A, Wang L and Chen W Z 2022 LoRA: low-rank adaptation of large language modelsProc. 10th Int. Conf. on Learning Representations(ICLR) (https://doi.org/10.1523/JNEUROSCI.2255-21.2022)