[1] [1] M A S Torres, H J C Voorwald. An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel[J]. International Journal of Fatigue, 2002, 24(8): 877-886.

[2] [2] M P Nascimento, R C Souza, W L Pigatin, et al.. Effects of surface treatments on the fatigue strength of AISI 4340 aeronautical steel[J]. International Journal of Fatigue, 2001, 23(7): 607-618.

[3] [3] B Q Yang, G N Chen, K Zhang, et al.. A mechanical model for the quantification of the effect of laser quenching on CTOD in steels[J]. Journal of Materials Processing Technology, 2009, 209(4): 2180-2185.

[4] [4] Z Y Chen, G J Zhou, Z H Chen. Microstructure and hardness investigation of 17-4PH stainless steel by laser quenching [J]. Materials Science and Engineering A, 2012, 534(1): 536-541.

[5] [5] R L Mcdaniels, S A White, K Liaw, et al.. Effects of a laser surface processing induced heat-affected zone on the fatigue behavior of AISI 4340 steel[J]. Materials Science and Engineering A, 2008, 485(1-2): 500-507.

[6] [6] Li Haimei, Song Gang, Liu Yongzhi. Estimating formula of fatigue limits for metallic materials[J]. Journal of Zhengzhou University (Engineering Science), 2002, 23(4): 26-29.

[7] [7] Shao Honghong, Chen Guang, Chen Kangmin. Effects of surface treatments on the ultrasonic fatigue life of 40CrNiMo steel[J]. Transactions of Materials and Heat Treatment, 2006, 27(4): 65-68.

[8] [8] Jian Haigen, Jiang Feng, Zheng Xiuyuan, et al.. Study on fatigue fractography of high strength and toughness aluminum alloy for aviation[J]. Journal of Aeronautic Materials, 2010, 30(4): 97-102.

[9] [9] Fu Zhiqiang, Pan Hongwei, Chen Guangzhi, et al.. Failure analysis of 40CrNiMo steel gear shaft[J]. Heat Treatment of Metals, 2011, 36(S1): 376-378.

[10] [10] Wang Jianguo, Yang Shengli, Wang Hongying, et al.. Low cycle fatigue properties of 800MPa-grade ultrafine-grained steel[J]. Journal of University of Science and Technology Beijing, 2005, 27(1): 75-78.

[11] [11] Hui Weijun, Nie Yihong, Fu Shuhong, et al.. Fatigue fracture behavior of high strength Cr-Mo-V steel[J]. Transactions of Materials and Heat Treatment, 2007, 28(5): 37-41.

[12] [12] Luo Xinmin, Zhang Jingwen, Zhao Guangzhi, et al.. Effect of laser shock strengthening on fatigue behaviors of 2A02 aluminum alloy[J]. Chinese J Lasers, 2009, 36(12): 3323-3328.

[13] [13] Li Bin, Dong Wanyuan, Wang Xiaobing, et al.. Study of fatigue performance for high strength steel 30Cr3SiNiMoVA[J]. Journal of Materials Engineering, 2012(2): 35-40.

[14] [14] Xu Tianhan, Feng Yaorong, Song Shengyin, et al.. Effect of stress ratio on fracture morphology of fatigue crack of J55 steel[J]. Journal of Iron and Steel Research, 2010, 22(1): 46-51.

[15] [15] Cheng Yiyuan, Wang Yong, Han Bin, et al.. Microstructure and properties of 35CrMoA steel in laser quenching-nitriding[J]. Chinese J Lasers, 2010, 37(1): 250-255.

[16] [16] Shi Juan, Wu Gang, Fan Xueyan, et al.. The test and study of fatigue life and wear resistance of laser hardening gear[J]. Journal of Shanghai Maritime University, 2004, 25(1): 92-96.

[17] [17] Zhou Jianzhong, Wang Chengdong, Huang Shu, et al.. Study on fatigue crack growth performance of 6061-T6 aluminum alloy after laser shot peening[J]. Chinese J Lasers, 2011, 38(7): 0703009.

[18] [18] Zhang Xingquan, He Guangde, Qi Xiaoli, et al.. Investigation on contact fatigue strength of gear affected by laser shock processing[J]. Chinese J Lasers, 2010, 37(12): 3187-3191.

[19] [19] Zhang Xiaodong, Dong Shiyun, Xu Binshi, et al.. Microstructure and contact fatigue property of laser cladding and active screen plasma duplex treated coating[J]. Chinese J Lasers, 2011, 38(6): 0603018.