[1] [1] Lu Y, Li H, Qian X, et al. Beta-cyclodextrin based reflective fiber-optic SPR sensor for highlysensitive detection of cholesterol concentration [J]. Optical Fiber Technology, 2020, 56：102187.

[2] [2] Ma Q F, Tou Z Q, Ni K, et al. Carbonnanotube/polyvinyl alcohol coated thin core fiber sensor for humidity measurement [J]. Sens. Actuators B Chem, 2018, 257：800-806.

[3] [3] Bian C, Hu M L, Wang R H, et al. Optical fiber humidity sensor based on the direct respose of the polyimide film [J]. Appl. Opt., 2018, 57：356-361.

[4] [4] Huang J, Wang B W, Ni K. Improving the sensitivity of humidity sensor based on Mach-Zehnder interferometer coated with a methylcellulose [J]. Int. J. Opt., 2018,（2018）：1-5.

[5] [5] Sanij D M, Rooholamininejad H, Bahrampour R A. Analytical solution of an induced fiber grating relative humidity sensor [J]. Iranian Journal of Science and Technology, Transactions A：Science, 2020, 44（2）：1-8.

[6] [6] Dissanayake K PW, Wu W P, Nguyen H, et al. Graphene-oxide-coated long-period grating-based fiber optic sensor for relative humidity and external refractive index [J]. J. Lightwave Technol, 2018, 36：1145-1151.

[7] [7] Jianxin Z, Xueyun S, Miao Q, et al. An optical fiber sensor based on polyimide coated fiber Bragg grating for measurement of relative humidity [J]. Optical Fiber Technology, 2021, 61：102406.

[8] [8] YingGang N, Safari N Y, Ivan C, et al. Properties of fiber Bragg grating in CYTOP fiber response to temperature, humidity, and strain using factorial design [J]. Sensors, 2022, 22（5）：1934-1934.

[9] [9] Pan G, Danting C, Qiaofeng D, et al. Ultrafast microfiber humidity sensor based on three dimensional molybdenum disulfide network cladding [J]. Frontiers in Physics, 2022, 10.

[10] [10] Shin J C, Yoon M S, Han Y G. Relative humidity sensor based on an optical microfiber knot resonator with a polyvinyl alcohol overlay [J]. J. Lightwave Technol., 2016, 34：4511-4515.

[11] [11] Leal A J, Theodosiou A, Frizera-Neto A, et al. Characterization of a new polymer optical fiber with enhanced sensing capabilities using a Bragg grating [J]. Opt. Lett., 2018, 43：4799-4802.

[12] [12] Woyessa G, Fasano A, Markos C, et al. Low loss polycarbonate polymer optical fiber for high temperature FBG humidity sensing [J]. IEEE Photonics Technol. Lett., 2017, 29：575-578.

[13] [13] Miao Y, Bo L, Hao Z, et al. Relative humidity sensor based on tilted fiber Bragg grating with polyvinyl alcohol coating [J]. IEEE Photonics Technology Letters, 2009, 21（7）：441-443.

[14] [14] Zhang J, Shen X, Qian M, et al. An optical fiber sensor based on polyimide coated fiber Bragg grating for measurement of relative humidity [J]. Optical Fiber Technology, 2021, 61：102406.

[15] [15] Hu Y, Ghaffar A, Hou Y, et al. A micro structure POF relative humidity sensor modified with agarose based on surface plasmon resonance and evanescent wave loss [J]. Photonic Sensors, 2021, 11（4）：392.

[16] [16] Yi Y, Jiang Y, Zhao H, et al. High-performance ultrafast humidity sensor based on microknot resonator-assisted Mach-Zehnder for monitoring human breath [J]. ACS Sensors, 2020, 5（11）：3404-3410.

[17] [17] Liang H, Feng Y, Liu H, et al. High-performance PCF-SPR sensor coated with Ag and graphene for humidity sensing [J]. Plasmonics, 2022, 17（4）：1765-1773.

[18] [18] Jie M, Jin-Na M, Jin L, et al. Humidity sensing and temperature response performance of polymer gel cold-spliced optical fiber Fabry-Perot interferometer [J]. Optical Fiber Technology, 2022, 68：102823.

[19] [19] Wei H, Yang X, Zhou J, et al. Experimental research on the mechanical properties of PVA fiber reinforced concrete [J]. Research Journal of Applied Sciences Engineering & Technology, 2013, 5（18）：4563-4567.

[20] [20] Sheng, Liu, Linjie, et al. Hybrid plasmonic waveguide made of a nanofiber attached to a metal film [J]. Optics Express, 2015, 23（13）：16984-16992.

[21] [21] Y Wu, B Yao, Y Cheng, et al. Four-wave mixing in a microfiber attached onto a graphene film [J]. IEEE Photon. Technol. Lett., 2014, 26（3）：249-252.

[22] [22] Wong W C, Chan C C, Chen L H, et al. Polyvinyl alcohol coated photonic crystal optical fiber sensor for humidity measurement [J]. Sens. Actuators B Chem., 2012, 174：563-569.

[23] [23] Chenyang Z, Qingchen Y, Liang F, et al. High-performance humidity sensor based on a polyvinyl alcohol-coated photonic crystal cavity [J]. Optics Letters, 2016, 41（23）：5515-5518.

[24] [24] Y Wang, J R Wang, Y Shao, et al. Highly sensitive surface plasmon resonance humidity sensor based on a polyvinylalcohol-coated polymer optical Fiber [J]. Biosensors, 2021, 11（11）：461.

[25] [25] Wu S, Yan G, Lian Z, et al. An open-cavity Fabry-Perot interferometer with PVA coating for simultaneous measurement of relative humidity and temperature [J]. Sensors & Actuators：B. Chemical, 2016, 225：50-56.

[26] [26] Tingkuo C, Haiming J, Hongyan X, et al. U-shaped microfiber sensor coated with PVA nanofibers for the simultaneous measurement of humidity and temperature [J]. Sensors and Actuators：B. Chemical, 2023, 378.

[27] [27] Wang Z, Hu G X, Luo H M, et al. Simultaneous measurement of humidity and temperature using a hybrid plasmonic waveguide Bragg grating [J]. IEEE Photonics Journal, 2024, 16（2）：1-6.

[28] [28] Wu S N, Yan G F, Lian F N, et al. An open-cavity Fabry-Perot Interferometer with PVA Coating for Simultaneous Measurement of Relative Humidity and Temperature [J]. Sensors Actuator Biochemistry, 2016, 225：50-56.