[1] Wang M Q, Deng Q, Du J H et al. The effect of aluminum on microstructure and mechanical properties of ATI 718Plus alloy[J]. Materials Transactions, 56, 635-641(2015).

[2] Xie B C, Zhang B Y, Yu H et al. Microstructure evolution and underlying mechanisms during the hot deformation of 718Plus superalloy[J]. Materials Science and Engineering: A, 784, 139334(2020).

[3] Wang M Q, Du J H, Deng Q et al. Effect of the precipitation of the η-Ni3Al0.5Nb0.5 phase on the microstructure and mechanical properties of ATI 718Plus[J]. Journal of Alloys and Compounds, 701, 635-644(2017).

[4] Kennedy R L. Allvac 718Plus, superalloy for the next forty years[EB/OL]. https:∥www.tms.org/Superalloys/10.7449/2005/Superalloys_2005_1_14.pdf

[5] Guo Q Y, Ma Z Q, Qiao Z X et al. A new type-γ′/γ″coprecipitation behavior and its evolution mechanism in wrought Ni-based ATI 718Plus superalloy[J]. Journal of Materials Science & Technology, 119, 98-110(2022).

[6] Whitmore L, Ahmadi M R, Stockinger M et al. Microstructural investigation of thermally aged nickel-based superalloy 718Plus[J]. Materials Science and Engineering: A, 594, 253-259(2014).

[7] Pickering E J, Mathur H, Bhowmik A et al. Grain-boundary precipitation in Allvac 718Plus[J]. Acta Materialia, 60, 2757-2769(2012).

[8] Yu H J, Dai D H, Shi X Y et al. Thermal behaviors of initial and steady state deposition processes of Ti/Al heterogeneous materials fabricated by laser additive manufacturing on curved surface[J]. Chinese Journal of Lasers, 50, 0802302(2023).

[9] Yang G, Zou W B, Wang C et al. Microstructure and properties of laser additive jointing heterogeneous aluminum alloys[J]. Chinese Journal of Lasers, 49, 2202010(2022).

[10] Zhao J F, Cheng C, Xie D Q et al. High-temperature tensile property of GH4169 nickel-based superalloys by laser repair[J]. Chinese Journal of Lasers, 43, 0802012(2016).

[11] Qi Y A, Zhao J F, Xie D Q et al. Flexural property of GH4169 nickel-based superalloy by laser repair[J]. Chinese Journal of Lasers, 40, 1103009(2013).

[12] Yu Q, Wang C S, Dong C. Microstructure and properties of Ni-Cr-Al basic alloys fabricated by laser additive manufacturing[J]. Chinese Journal of Lasers, 49, 1402104(2022).

[13] Zhang Y C, Yang L, Lu W Z et al. Microstructure and elevated temperature mechanical properties of IN718 alloy fabricated by laser metal deposition[J]. Materials Science and Engineering: A, 771, 138580(2020).

[14] Marchese G, Lorusso M, Parizia S et al. Influence of heat treatments on microstructure evolution and mechanical properties of Inconel 625 processed by laser powder bed fusion[J]. Materials Science and Engineering: A, 729, 64-75(2018).

[15] Tang L T, Zhang H Y, Guo Q Y et al. The precipitation of η phase during the solution treatments of Allvac 718Plus[J]. Materials Characterization, 176, 111142(2021).

[16] Li J, Ding R, Guo Q Y et al. Effect of solution cooling rate on microstructure evolution and mechanical properties of Ni-based superalloy ATI 718Plus[J]. Materials Science and Engineering: A, 812, 141113(2021).

[17] Qi Q Q, Zhang H J, Liu C X et al. On the microstructure evolution during low cycle fatigue deformation of wrought ATI 718Plus alloy[J]. Materials Science and Engineering: A, 798, 140132(2020).

[18] Li J, Wu Y T, Liu Y C et al. Enhancing tensile properties of wrought Ni-based superalloy ATI 718Plus at elevated temperature via morphology control of η phase[J]. Materials Characterization, 169, 110547(2020).

[19] Srinivasan D, Lawless L U, Ott E A[M]. Experimental determination of TTT diagram for alloy 718Plus^®, 759-68(2012).

[20] Dinda G P, Dasgupta A K, Mazumder J. Texture control during laser deposition of nickel-based superalloy[J]. Scripta Materialia, 67, 503-506(2012).

[21] Kermanpur A, Babu R P, Larsson H et al. Simulation and experimental analysis of nanoscale precipitation during ageing treatment of laser powder-bed fusion fabricated IN718 Ni-based superalloy[J]. Materials Characterization, 191, 112163(2022).

[22] DuPont J N, Marder A R, Notis M R et al. Solidification of Nb-bearing superalloys: part II. pseudoternary solidification surfaces[J]. Metallurgical and Materials Transactions A, 29, 2797-2806(1998).

[23] DuPont J N, Notis M R, Marder A R et al. Solidification of Nb-bearing superalloys: part I. reaction sequences[J]. Metallurgical and Materials Transactions A, 29, 2785-2796(1998).

[24] Sui S, Chen J, Zhang R et al. The tensile deformation behavior of laser repaired Inconel 718 with a non-uniform microstructure[J]. Materials Science and Engineering: A, 688, 480-487(2017).

[25] Sui S, Chen J, Ming X L et al. The failure mechanism of 50% laser additive manufactured Inconel 718 and the deformation behavior of Laves phases during a tensile process[J]. The International Journal of Advanced Manufacturing Technology, 91, 2733-2740(2017).

[26] Yuan K B, Guo W G, Li P H et al. Influence of process parameters and heat treatments on the microstructures and dynamic mechanical behaviors of Inconel 718 superalloy manufactured by laser metal deposition[J]. Materials Science and Engineering: A, 721, 215-225(2018).

[27] Sui S, Chen J, Ma L et al. Microstructures and stress rupture properties of pulse laser repaired Inconel 718 superalloy after different heat treatments[J]. Journal of Alloys and Compounds, 770, 125-135(2019).

[28] Li X, Shi J J, Wang C H et al. Effect of heat treatment on microstructure evolution of Inconel 718 alloy fabricated by selective laser melting[J]. Journal of Alloys and Compounds, 764, 639-649(2018).

[29] Jang J, Yim J, Lee S H. Phase formation kinetics during heat treatments of Inconel 718 deposits based on cold metal transfer-based wire arc additive manufacturing[J]. Materials Characterization, 193, 112294(2022).

[30] Asala G, Andersson J, Ojo O A. Improved dynamic impact behaviour of wire-arc additive manufactured ATI 718Plus®[J]. Materials Science and Engineering: A, 738, 111-124(2018).

[31] Sui S, Zhong C L, Chen J et al. Influence of solution heat treatment on microstructure and tensile properties of Inconel 718 formed by high-deposition-rate laser metal deposition[J]. Journal of Alloys and Compounds, 740, 389-399(2018).

[32] Sui S, Tan H, Chen J et al. The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing[J]. Acta Materialia, 164, 413-427(2019).

[33] Hu Y L, Lin X, Li Y L et al. Influence of heat treatments on the microstructure and mechanical properties of Inconel 625 fabricated by directed energy deposition[J]. Materials Science and Engineering: A, 817, 141309(2021).

[34] Zhang S Y, Lin X, Wang L L et al. Strengthening mechanisms in selective laser-melted Inconel718 superalloy[J]. Materials Science and Engineering: A, 812, 141145(2021).

[35] Chen Y H, Yang C L, Fan C L et al. The influence of solution temperature on microstructure evolution and mechanical properties of ATI 718Plus repaired by wire and arc additive manufacturing[J]. Materials Science and Engineering: A, 852, 143641(2022).