[1] Liu Y F, Zhou Y L, Zhang Q et al. Microstructure and dry sliding wear behavior of plasma transferred arc clad Ti5Si3 reinforced intermetallic composite coatings[J]. Journal of Alloys and Compounds, 591, 251-258(2014).

[2] Banerjee D, Williams J C. Perspectives on titanium science and technology[J]. Acta Materialia, 61, 844-879(2013).

[3] Zhou Y, Wen S F, Song B et al. A novel titanium alloy manufactured by selective laser melting: microstructure, high temperature oxidation resistance[J]. Materials & Design, 89, 1199-1204(2016).

[4] Zhang H X, Yu H J, Chen C Z. In-situ forming composite coating by laser cladding C/B4C[J]. Materials and Manufacturing Processes, 30, 743-747(2015).

[5] Liu Y N, Gu M, Sun R L et al. Microstructure and properties of in-situ TiC/Ti2Ni composite coating prepared via laser cladding on titanium alloy[J]. Chinese Journal of Lasers, 48, 1402011(2021).

[6] Zhao G L, Zou Y, Zou Z D et al. Research on in situ synthesised (Ti, V)C/Fe composite coating by laser cladding[J]. Materials Science and Technology, 31, 1329-1334(2015).

[7] Yang C Y, Cheng X, Tang H B et al. Influence of microstructures and wear behaviors of the microalloyed coatings on TC11 alloy surface using laser cladding technique[J]. Surface and Coatings Technology, 337, 97-103(2018).

[8] Cui C, Wu M P, Xia S H. Effect of heat treatment on properties of laser cladding cobalt-based coating on 42CrMo steel surface[J]. Chinese Journal of Lasers, 47, 0602011(2020).

[9] Wu D J, Lu F, Zhao D K et al. Effect of doping SiC particles on cracks and pores of Al2O3-ZrO2 eutectic ceramics fabricated by directed laser deposition[J]. Journal of Materials Science, 54, 9321-9330(2019).

[10] Song S Y, Wang L, Hu Y et al. Graded coating produced by laser melt injection under steady magnetic field[J]. Chinese Journal of Lasers, 43, 0503005(2016).

[11] Liu D F. Study on ductility-enhancing and strengthening mechanism of Y micro-alloyed 6.5% Si high-silicon steel and evolution of microstructure and texture in hot and warm rolling[D](2020).

[12] Du T. The effect and mechanism of rare earth elements in metals[J]. Transactions of Nonferrous Metals Society of China, 6, 13-18(1996).

[13] Sharma V K, Kumar V, Joshi R S. Investigation of rare earth particulate on tribological and mechanical properties of Al-6061 alloy composites for aerospace application[J]. Journal of Materials Research and Technology, 8, 3504-3516(2019).

[14] Wang C L, Gao Y, Wang R et al. Microstructure of laser-clad Ni60 cladding layers added with different amounts of rare-earth oxides on 6063 Al alloys[J]. Journal of Alloys and Compounds, 740, 1099-1107(2018).

[15] Liu Y N, Sun R L, Niu W et al. Effects of CeO2 on microstructure and properties of TiC/Ti2Ni reinforced Ti-based laser cladding composite coatings[J]. Optics and Lasers in Engineering, 120, 84-94(2019).

[16] Li A M. Effect of rare-earth on the laser clad TiCp/Ni-based composite coating[D](2001).

[17] Yang F, Zhang Z Q, Zhang H W et al. Effects of CeO2 on forming quality and microstructure of TiCx-reinforced Ti-based laser cladding coating[J]. China Surface Engineering, 33, 137-151(2020).

[18] Nieh T G, Wadsworth J. Hall-petch relation in nanocrystalline solids[J]. Scripta Metallurgica et Materialia, 25, 955-958(1991).

[19] Wang W, Shu G J, He D P. Distribution of rare earth elements in Al Mg alloy and its effect on crystalline structure[J]. Journal of the Chinese Rare Earth Society, 8, 252-256(1990).

[20] Liu W J, Zeng D B, Huang H S. Influence of rare-earth metal oxide coating on the structure and properties of laser strengthened area of cast iron[J]. Chinese Journal of Lasers, 19, 613-617(1992).

[21] Stetsovych V, Pagliuca F, Dvorak F et al. Epitaxial Cubic Ce2O3 Films via Ce-CeO2 Interfacial Reaction[J]. Journal of Physical Chemistry Letters, 4, 866(2013).

[22] Shu Q L, Wang J H, Wu D H. A new method for testing fracture toughness by introducing ceramic natural cracks[J]. Journal of Shandong Institute of Building Materials, 12, 246-250(1998).

[23] Wan D T, Wei Y J, Bao Y W et al. Accuracy and simplicity of ceramic fracture toughness testing methods[J]. Journal of the Chinese Ceramic Society, 47, 1080-1088(2019).

[24] Hu Y W. Fracture toughness measuring of ceramics by SEVNB method[D](2011).

[25] Guan Z D, Du X M. Comparison of methods of determining fracture toughness KIC of ceramic materials[J]. Journal of the Chinese Ceramic Society, 10, 262-271(1982).

[26] Qiu T. Determination of KIC values of several high temperature structural ceramics by indentation method[J]. Bulletin of the Chinese Ceramic Society, 9, 44-50(1990).