[1] [1] HIROSHI T. Fiber Bragg grating vibration-sensing system insensitive to Bragg wavelength and employing fiber ring laser［J］.Optic Letters,2010,35(14):2349-2351.

[2] [2] YIN X L, ZHANG Q, YU CH X, et al.. OCDMA encoder/decoder based on phase shifted super structure fiber Bragg grating and its correlation property［J］. Opt. Precision Eng., 2008,16(9):1608-1613.(in Chinese)

[3] [3] WANG W, LIN Y CH, ZHU P Y. Application of FBG sensor to measurement of dynamic performance of low impedance material［J］. Opt. Precision Eng., 2009,17(3):488-492.(in Chinese)

[4] [4] TU X H, LIU F Q, XU N. Desigh of high channel-count optical of fiber filters based on sampled bragg grating with discrete linear chirp structure ［J］. Opt. Precision Eng., 2010,18(9):1965-1971.(in Chinese)

[5] [5] RAO Y J, WANG Y P, ZHU T. The Theory and Application of Fiber Bragg Grating［M］. Beijing:Science Press, 2005，153-154:185.(in Chinese)

[6] [6] TU Y Q, LIU X CH. Intelligent Structured Based on Optical Fibers［M］. Beijing:Advanced Education Press,2005:82-83.(in Chinese)

[7] [7] LI Y L,ZHANG H, FENG Y, et al.. Metal coating of fiber bragg grating and the temperature sensing character after metallization ［J］. Optical Fiber Technology, 2009, 15: 391-397.

[8] [8] SHEN R S, ZHANG J, WANG Y, et al.. Study on high-temperature and high-pressure measurement by using metal-coated FBG ［J］. Microwave and Optical Technology Letters, 2008, 50(5): 1138-1140.

[9] [9] SHIUE S T. Effect of the coating thickness and roughness on the mechanical strength and thermally induced stress voids in nickel-coated fibers prepared by eletroless plating method ［J］. Thin Solid Film, 2005,485: 169-175.

[10] [10] SANDLIN S, KINNUNEN T, RM J, et al.. A simple method for metal re-coating of optical fibre Bragg gratings ［J］. Surface & Coatings Technology, 2006, 201: 3061-3065.

[11] [11] FENG Y, ZHANG H, LI Y L, et al.. Temperature sensitization model of fiber Bragg grating with metal coating［J］. Acta Optica Sinica, 2009，29(2)：336-341.(in Chinese)

[12] [12] WANG H G. Introduction to Thermoelasticity［M］. Beijing:Tsinghua University Press, 1989:199.(in Chinese)

[13] [13] CHEN D F, WANG J, LIN ZH B, et al.. The Theory and Application of Sensor［M］. Beijing:China Machine Press, 2008.(in Chinese)

[14] [14] SHIUE S T. Effect of coating thickness on thermal stresses in tungsten-coated optical fibers［J］. Jornal of Applied Physics, 2000,87(8):3759-3762.

[15] [15] SHIUES T, YANG C H, CHU R S, et al.. Effect of the coating thickness and roughness on the mechanical strength and thermally induced stress voids in nickel-coated optical fibers prepared by electroless plating method［J］. Thin Solid Film, 2005, 485:169-174.

[16] [16] YONETANI S. Produce and Counter Measure of Residual Stress［M］.Beijing:China Mechine Press, 1983：308-309.(in Chinese)

[17] [17] SHIUE S T, LIN Y S. Thermal stress in metal-coated optical fibers［J］. Journal of Applied Physics，1998, 83(11): 5719-5723.

[18] [18] LIU R ZH. Factors affecting innerstress of nickel deposits and their trouble-shootings［J］. Electroplating & Finishing，2004,10:64-66.(in Chinese)

[19] [19] XIE H, CHEN W ZH, QIAN K W. Effects of heat treatment on the internal stress and adhesion of Ni-P coating［J］. Electroplating&Pollution Control, 2004, 24(3):13-15.(in Chinese)

[20] [20] SHANG X J. Electroless Ni-P and its heat treatment［J］. Mechina Research and Application,1998(1):37-38.(in Chinese)