[1] YU Haihu, WANG Ying, MA Jian et al. Fabry-perot interferometric high-temperature sensing up to 1 200 ℃ based on a silica glass photonic crystal fiber[J]. Sensors, 18, 273-281(2018).

[2] HOU Maoxiang, ZHU Feng, WANG Ying et al. Antiresonant reflecting guidance mechanism in hollow-core fiber for gas pressure sensing[J]. Optics Express, 24, 27890-27898(2016).

[3] MITANI S, NIGO K, KARASAWA S et al. Interferometric fiber-optic gyroscope using multi-core fiber[J]. Journal of Lightwave Technology, 37, 5525-5530(2019).

[4] HOTATE K, HARUMOTO M. Resonator fiber optic gyro using digital serrodyne modulation[J]. Journal of Lightwave Technology, 15, 466-473(1997).

[5] LIU Qiang, LI Shuguang, CHEN Hailiang. Enhanced sensitivity of temperature sensor by a PCF with a defect core based on Sagnac interferometer[J]. Sensors and Actuators B: Chemical, 254, 636-641(2018).

[6] ZHAO Jincheng, ZHAO Yong, BAI Lu et al. Sagnac interferometer temperature sensor based on microstructured optical fiber filled with glycerin[J]. Sensors and Actuators A: Physical, 314, 112245(2020).

[7] RABBI F, RAHMAN M T, KHALEQUE A et al. Theoretical analysis of Sagnac interferometer based highly sensitive temperature sensor on photonic crystal fiber[J]. Sensing and Bio-Sensing Research, 31, 100396(2021).

[8] QI Fei, XIN Yi, DONG Xinyong et al. Sagnac interferometer based temperature sensor with alcohol-filled side-hole fiber[J]. Laser & Optoelectronics Progress, 50, 010601(2013).

[9] RUAN Juan, HU Lirui, LU Anshan et al. Temperature sensor employed TCF-PMF fiber structure-based Sagnac interferometer[J]. IEEE Photonics Technology Letters, 29, 1364-1366(2017).

[10] LIU Zhaolun, SUI Yanru, GUO Xiaojie et al. A spiral photonic crystal fiber capable of transmitting orbital angular momentum[J]. Semiconductor Optoelectronics, 43, 347-352, 388(2022).

[11] LV Liangliang, LIU Qiang, XUE Pingsheng. The sensing characteristics of microstructure-core photonic crystal fiber filled with liquid based on Sagnac interferometer[J]. Results in Physics, 18, 103198(2020).

[12] WANG Xu, HAO Xiangying, WU Shun. Simulation of highly sensitive temperature sensing based on a selectively ethanol-filled twin-core photonic crystal fiber[J]. Optics Communications, 508, 127769(2022).

[13] CUI Ying, SHUM P P, HU D J J et al. Temperature sensor by using selectively filled photonic crystal fiber Sagnac interferometer[J]. IEEE Photonics Journal, 4, 1801-1808(2012).

[14] LI Xuegang, ZHAO Yong, ZHOU Xue et al. High sensitivity all-fiber Sagnac interferometer temperature sensor using a selective ethanol-filled photonic crystal fiber[J]. Instrumentation Science & Technology, 46, 253-264(2018).

[15] WU Jianjun. The study of photonic crystal fiber sensor based on Sagnac interferometer[D], 33-34(2017).

[16] LIU Lei, CHEN Hui, ZHANG Yanjun. Refractive index sensing simulation analysis of four-pole suspended core fiber based on surface plasmon resonance[J]. Acta Optical Sinica, 42, 0806003(2022).

[17] PANG M, XIAO Limin, JIN Wen et al. Birefringence of hybrid PCF and its sensitivity to strain and temperature[J]. Journal of Lightwave Technology, 30, 1422-1432(2012).

[18] MENG Fanlong, WANG Hong, FANG Di. Research on D-shape open-loop PCF temperature refractive index sensor based on SPR effect[J]. IEEE Photonics Journal, 14, 1-5(2022).

[19] WU Tiesheng, WANG Li, WANG Zhe et al. A photonic crystal fiber temperature sensor based on Sagnac interferometer structure[J]. Chinese Journal of Lasers, 39, 1114002(2012).

[20] XU Jiacheng, YU Fei, XU Bingsheng et al. Research on influence of drawing tension and heat treatment on the birefringence of panda-type polarization-maintaining fiber[J]. Acta Photonica Sinica, 50, 1106002(2021).

[21] HAN Tiantian, LIU Yange, WANG Zhi et al. Control and design of fiber birefringence characteristics based on selective-filled hybrid photonic crystal fibers[J]. Optics Express, 22, 15002-15016(2014).

[22] BOUFENAR R, BOUAMAR M, HOCINI A. Simulation and numerical analysis of highly birefringent photonic crystal fiber for temperature sensing application[J]. Photonics and Nanostructures-Fundamentals and Applications, 24, 47-52(2017).

[23] ZHOU Minghao. A novel highly birefringent PCF based on lattice structure of elliptic layer[D], 35-41(2016).

[24] LIU Qiang, LI Shuguang, SHI Min. Fiber Sagnac interferometer based on a liquid-filled photonic crystal fiber for temperature sensing[J]. Optics Communications, 381, 1-6(2016).

[25] LI Xuegang, ZHAO Yong, ZHOU Xue et al. High sensitivity all-fiber Sagnac interferometer temperature sensor using a selective ethanol-filled photonic crystal fiber[J]. Instrumentation Science & Technology, 46, 253-264(2018).

[26] HOSSAIN M S, FAISAL M. Theoretical investigation of mid infrared temperature sensor based on Sagnac interferometer using chloroform filled photonic crystal fiber[J]. IEEE Sensors Journal, 21, 24157-24165(2021).

[27] GHAZANFARI A, LI Wenbing, LEU M C et al. A novel freeform extrusion fabrication process for producing solid ceramic components with uniform layered radiation drying[J]. Additive Manufacturing, 15, 102-112(2017).

[28] CUBILLAS A M, UNTERKOFLER S, EUSER T G et al. Photonic crystal fibers for chemical sensing and photochemistry[J]. Chemical Society Reviews, 42, 8629-864(2013).

[29] EBENDORFF-HEIDEPRIEM H, SCHUPPICH J, DOWLER A et al. 3D-printed extrusion dies: a versatile approach tooptical material processing[J]. Optical Materials Express, 4, 1494-1504(2014).

[30] El HAMZAOUI H, OUERDANE Y, BIGOT L et al. Sol-gel derived ionic copper-doped microstructured optical fiber: a potential selective ultraviolet radiation dosimeter[J]. Optics Express, 20, 29751-29760(2012).

[31] ISSA N A, VAN EIJKELENBORG M A, FELLEW M et al. Fabrication and study of microstructured optical fibers with elliptical holes[J]. Optics Letters, 29, 1336-1338(2004).

[32] KERBAGE C, STEINVURZEL P, REYES P et al. Highly tunable birefringent microstructured optical fiber[J]. Optics Letters, 27, 842-844(2002).

[33] QIAN Wenwen, ZHAO Chunliu, WANG Yunpeng et al. Partially liquid-filled hollow-core photonic crystal fiber polarizer[J]. Optics Letters, 36, 3296-3298(2011).

[34] WANG Yiping, TAN Xiaoling, JIN Wen et al. Improved bending property of half-filled photonic crystal fiber[J]. Optics Express, 18, 12197-12202(2010).

[35] XIAO Limin, JIN Wen, DEMOKAN M et al. Fabrication of selective injection microstructured optical fibers with a conventional fusion splicer[J]. Optics Express, 13, 9014-9022(2005).

[36] JU Jian, XUAN Haifeng, JIN Wen et al. Selective opening of airholes in photonic crystal fiber[J]. Optics Letters, 35, 3886-3888(2010).

[37] HUANG Yanyi, XU Yong, YARIV A. Fabrication of functional microstructured optical fibers through a selective-filling technique[J]. Applied Physics Letters, 85, 5182-5184(2004).