NUCLEAR TECHNIQUES, Volume. 47, Issue 11, 110601(2024)

Irradiation-induced swelling of U-Mo fuel for heat-pipe reactor under high temperature

Qinwen YAO, Xitong GUAN, Quan CHENG, Jigao DAI, Yuanfang ZOU, Xiaojun HE*, and Aimin ZHANG
Author Affiliations
  • Department of Reactor Engineering Technology, China Institute of Atomic Energy, Beijing 102413, China
  • show less
    Figures & Tables(12)
    Comparison of Kilopower 1 kWe nuclear power system with KRUSTY nuclear test hardware
    Schematic diagram of fuel geometry model
    Comparison between irradiation swelling data and existed model
    Fitted curve of irradiation swelling model for U-Mo alloy at high temperature
    Calculated temperature distribution of core fuel
    Distribution of deformation (a) and stress (b) of core fuel
    Maximum deformation (a) and maximum stress (b) at different burnups
    • Table 1. Design parameters of fuel

      View table
      View in Article

      Table 1. Design parameters of fuel

      参数Parameter值Value
      富集度Enrichment / %93.1
      外径External diameter / mm110
      内径Internal diameter / mm40
      长度Length / mm250
      热管外径Outer diameter of heat pipe / mm12.7
    • Table 2. Comparison between irradiation swelling data and model prediction value

      View table
      View in Article

      Table 2. Comparison between irradiation swelling data and model prediction value

      材料

      Material

      燃耗

      Burnup / %

      裂变密度

      Fission density / cm-3

      辐照温度

      Irradiation temperature / K

      实测肿胀

      Measured value / %

      预测肿胀

      Predicted value / %

      U-13.4Mo0.220.80×10201 0731.000.42
      U-10Mo0.271.05×10208500.500.56
      U-10Mo0.361.43×10201 0891.800.76
      U-10Mo0.381.48×10201 1111.500.78
      U-7.5Mo0.381.57×10201 0722.300.83
      U-7.5Mo0.391.61×10201 1052.400.85
      U-13.4Mo0.471.65×10209732.000.88
    • Table 3. Calculation value of temperature

      View table
      View in Article

      Table 3. Calculation value of temperature

      参数Parameter本文This thesis文献[9] Ref.[9]文献[10] Ref.[10]
      峰值温度Maximum temperature / K1 096.11 096.01 097.7
      最低温度Minimum temperature/ K1 074.21 074.01 076.1
      最大温差Temperature difference / K21.922.021.6
    • Table 4. Calculation results of deformation (thermal expansion only)

      View table
      View in Article

      Table 4. Calculation results of deformation (thermal expansion only)

      参数Parameter本文This thesis文献[9] Ref.[9]文献[10] Ref.[10]
      总最大变形Total maximum deformation / mm4.944.95
      轴向最大变形Axial maximum deformation / mm4.84
      径向最大变形Radial maximum deformation / mm1.050.921.36
      最大热应力Maximum thermal stress / MPa52.753.3
    • Table 5. Calculation results of deformation with consideration of thermal expansion and irradiation swelling

      View table
      View in Article

      Table 5. Calculation results of deformation with consideration of thermal expansion and irradiation swelling

      参数

      Parameters

      热膨胀和辐照肿胀

      Thermal expansion and

      irradiation swelling

      仅热膨胀

      Thermal expansion only

      偏差

      Deviation / %

      总最大变形Total maximum deformation / mm5.284.946.88
      轴向最大变形Axial maximum deformation / mm5.174.846.82
      径向最大变形Radial maximum deformation / mm1.131.057.62
      最大应力Maximum stress / MPa57.452.78.91
    Tools

    Get Citation

    Copy Citation Text

    Qinwen YAO, Xitong GUAN, Quan CHENG, Jigao DAI, Yuanfang ZOU, Xiaojun HE, Aimin ZHANG. Irradiation-induced swelling of U-Mo fuel for heat-pipe reactor under high temperature[J]. NUCLEAR TECHNIQUES, 2024, 47(11): 110601

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: NUCLEAR ENERGY SCIENCE AND ENGINEERING

    Received: Apr. 16, 2024

    Accepted: --

    Published Online: Jan. 2, 2025

    The Author Email: HE Xiaojun (HEXiaojun)

    DOI:10.11889/j.0253-3219.2024.hjs.47.110601

    Topics