[1] [1] Jack G. Zhou, Daniel Herscovici, Calvin C. Chen. Parametric process optimization to improve the accuracy of rapid prototyped stereolithography parts[J]. International J. Machine Tools & Manufacture, 2000, 40(2): 363～379

[2] [2] D. T. Pham, R. S. Gault. A comparison of rapid prototyping technologies[J]. International J. Machine Tools & Manufacture, 1998, 38(10): 1257～1276

[3] [3] Chen Xubing. Application of CAD models′ direct slicing on rapid prototyping systems[J]. China Mechanical Engineering, 2000, 11(10): 1098～1100

[4] [4] Shi Zhaohui, Fan Zhongwei, Zhang Ying et al.. High efficiency and high power all-solid-state ultraviolet laser[J]. Chinese J. Lasers, 2007, 34(1): 29～32

[5] [5] Yu Jun, Chen Jing, Tan Hua et al.. Effect of process parameters in the laser rapid forming on deposition layer[J]. Chinese J. Lasers, 2007, 34(7): 1014～1018

[6] [6] Wu Jiang, Gao Bo, Tan Hua et al.. Titanium base of complete denture fabricated with laser rapid forming[J]. Chinese J. Lasers, 2006, 33(8): 1139～1142

[7] [7] Jia Wenpeng, Lin Xin, Chen Jing et al.. Temperature/stress field numerical simulation of hollow blade produced by laser rapid forming[J]. Chinese J. Lasers, 2007, 34(9): 1308～1312

[8] [8] Han Yanfeng, Gao Bo, Hu Jiang et al.. Titanium coping fabricated with laser rapid forming[J]. Chinese J. Lasers, 2007, 34(6): 876～880

[9] [9] Peng Hansheng. Ultraintense solid-state lasers and applications to the frontiers of sciences[J]. Chinese J. Lasers, 2006, 33(6): 721～729

[10] [10] Li Jing. Control and application of photosensitivity rapid prototyping[J]. Modern Plastics Processing and Applications, 2002, 35(4): 37～38

[11] [11] Zhao Wanhua, Li Dichen, Lu Bingheng. Investigation of the part deformation in stereolithography[J]. J. Xi′an Jiaotong University, 2001, 35(7): 705～708

[12] [12] Wang Qinggang, Yan Yongnian, Guo Ge et al.. Study on stereolithograhpy technology[J]. New Technology & New Process, 2004, 5: 42～44

[13] [13] J. L. Song, Y. T. Li, Q. L. Deng et al.. Rapid prototyping manufacturing of silica sand patterns based on selective laser sintering[J]. J. Materials Processing Technology, 2007, 188(6): 614～618

[14] [14] P. Rochus, J. Y. Plesseria, M. van Elsen et al.. New applications of rapid prototyping and rapid manufacturing (RP/RM) technologies for space instrumentation[J]. Acta Astronautica, 2007, 61(2): 352～359

[15] [15] Wang Yungan, Lin Guocai, Chen Guoqing. Rapid forming technology and rapid forming system with laminated paper[J]. Metal Forming Machinery, 1996, 21(3): 36～37

[16] [16] Meng Huaidong, Yin Jinxiang, Hong Xiaoyin. Photopolymerization materials used in stereolithography and their recent advance[J]. J. Functional Materials, 1997, 28(3): 247～252

[17] [17] Peng Zhengzhi, Lin Xiaodong. Study on relative internal stress and shrinkage of cured volume for UV-curing coatings[J]. J. Beijing University of Chemical Technology, 1995, 22(4): 22～25

[18] [18] Duan Yugang, Wang Xuerang, Wang Suqin et al.. Research on a low curl photocurable resin for stereolithography[J]. J. Xi′an Jiaotong University, 2001, 35(11): 1155～1174

[19] [19] Duan Yugang, Wang Suqin, Chen Hao et al.. Study on the effect of photocuring resin shrinkage on parts curl distortion in the process of laser rapid prototyping[J]. Chemical Engineering, 2000, 28(6): 54～57

[20] [20] Zhai Huanping, Hou Liya, Jia Hongbing. Photocurable resins used for rapid prototyping[J]. Chemical World, 2002, 8: 437～440

[21] [21] Zou Jianfeng. Research on Stereolithgraphy Process and Part Accuracy[D]. Wuhan: Huazhong University of Science and Technology, 2004. 9～15

[22] [22] Zhao Yi. Experiment study of the photocurable resin for stereolithography[J]. Polymeric Materials Science & Engineering, 2004, 20(1): 184～186

[23] [23] American National Standards Institute. ASTMD638. Standard Test Method for Tensile Properties of Plastics[S]. New York: America Standard Press, 1997