[1] [1] Green D J. Anintroduction to the mechanical properties of ceramics[M]. Gong Jianghong, Transl. Beijing: Tsinghua University Press, 2003.

[2] [2] Smith P A, Haerle A G. Particle crowding analysis of slip casting[J]. Journal of the American Ceramic Society, 1995, 78(3): 809-812.

[3] [3] Mühler T, Gomes C M, Heinrich J, et al. Slurry-based additive manufacturing of ceramics[J]. International Journal of Applied Ceramic Technology, 2015, 12(1): 18-25.

[4] [4] Iyer S, McIntoch J, Bandyopadhyay A, et al. Microstructural characterization and mechanical properties of Si3N4 formed by fused deposition of ceramics[J]. International Journal of Applied Ceramic Technology, 2008, 5(2): 127-137.

[5] [5] Niu F Y, Wu D J, Zhou S Y, et al. Power prediction for laser engineered net shaping of Al2O3 ceramic parts[J]. Journal of the European Ceramic Society, 2014, 34(15): 3811-3817.

[6] [6] Hull C W, Arcadia C. Apparatus for production of three-dimensional objects by stereolithography: US4575330[P]. 1986-03-11. http://www.freepatentsonline.com/4575330.pdf.

[7] [7] Bae C J, Halloran J W. Integrally cored ceramic mold fabricated by ceramic stereolithography[J]. International Journal of Applied Ceramic Technology, 2011, 8(6): 1255-1262.

[8] [8] Eckel Z C, Zhou C Y, Martin J H, et al. Additive manufacturing of polymer-derived ceramics[J]. Science, 2016, 351(6268): 58-62.

[9] [9] Lu X S, Lee Y, Yang S F, et al. Solvent-based paste extrusion solid free forming[J]. Journal of the European Ceramic Society, 2010, 30(1): 1-10.

[10] [10] Grida I, Evans J R G. Extrusion free forming of ceramic through fine nozzles[J]. Journal of the European Ceramic Society, 2003, 23(5): 629-635.

[11] [11] Kumar S, Kruth J P. Composites by rapid prototyping technology[J]. Materials and Design, 2010, 31(2): 850-856.

[12] [12] Deckard C R, Austin T X. Method and apparatus for producing parts by selective sintering: US4863538[P]. 1989-09-05. http://www.freepatentsonline.com/4863538.pdf.

[13] [13] Shahzad K. Powder-based indirect selective laser sintering of ceramics[D]. Leuven: Catholic University of Leuven, 2013.

[14] [14] Peelamedu R, Badzian A, Roy R. Sintering of zirconia nanopowder by microwave-laser hybrid process[J]. Journal of the American Ceramic Society, 2004, 87(9): 1806-1809.

[15] [15] Goodridge R D, Dalgarno K W, Wood D J. Indirect selective laser sintering of an apatite-mullite glass-ceramic for potential use in bone replacement applications[J]. Journal Engineering in Medicine, 2006, 220(1): 57-68.

[16] [16] Shi Yusheng, Liu Kai, Li Chenhui, et al. Additive manufacturing of zirconia parts via selective lasers sintering combined with cold isostatic pressing[J]. Journal of Mechanical Engineering, 2014, 50 (21): 118-123.

[17] [17] Shahzad K, Deckers J, Kruth J P, et al. Additive manufacturing of alumina parts by indirect selective laser sintering and post processing[J]. Journal of Materials Processing Technology, 2013, 213(9): 1484-1494.

[18] [18] Meiners W. Direktes selektives laser sintern einkomponentiger metallischer werkstoffe(in German)[D]. Aachen: Rheinisch-Westfaelische Technische Hochschule Aachen Aachen University, 1999.

[19] [19] Kruth J P, Mercelis P, van Vaerenbergh J, et al. Binding Mechanisms in selective laser sintering and selective laser melting[J]. Rapid Prototyping Journal, 2005, 11(1): 26-36.

[20] [20] Meiners W, Wissenbach K, Gasser A. Selective laser sintering at melting temperature: US6215093[P]. 2001-04-10. http://www.freepatentsonline.com/6215093.pdf.

[21] [21] Brandl E, Heckenberger U, Holzinger V, et al. Additive manufactured AlSi10Mg samples using selective laser melting (SLM): Microstructure, high cycle fatigue, and fracture behavior[J]. Materials and Design, 2012, 34: 159-169.

[22] [22] Zhou Xin, Liu Wei. Melting and solidifying behavior in single layer selective laser of pure tungsten powder[J]. Chinese J Lasers, 2016, 43(5): 0503006.

[23] [23] Shishkovsky I, Yadroitsev I, Bertrand Ph, et al. Alumina-zirconium ceramics synthesis by selective laser sintering/melting[J]. Applied Surface Science, 2007, 254(4): 966-970.

[24] [24] Bertrand Ph, Bayle F, Combe C, et al. Ceramic components manufacturing by selective laser sintering[J]. Applied Surface Science, 2007, 254(4): 989-992.

[25] [25] Wilkes J I. Selektives laserschmelzen zur generativen herstellung von bauteilen aus hochfester oxidkeramik(in German)[D]. Aachen: Rheinisch-Westfaelische Technische Hochschule Aachen University, 2009.

[26] [26] Wilkes J I, Hagedorn Y C, Meiners W, et al. Additive manufacturing of ZrO2-Al2O3 ceramic components by selective laser melting[J]. Rapid Prototyping Journal, 2013, 19(1): 51-57.

[27] [27] Deckers J, Meyers S, Kruth J P, et al. Direct selective laser sintering/melting of high density alumina powder layers at elevated temperatures[J]. Physics Procedia, 2014, 56: 117-124.

[28] [28] van Elsen M. Complexity of selective laser melting: A new optimisation approach[D]. Leuven: Catholic University of Leuven, 2007.

[29] [29] Swain M V. Structure and properties of ceramics[M]. Guo Jingkun, et al, Transl. Beijing: Science Press, 1998.