[1] Yue X Z, Wei K W, Liu Y G et al. Microstructure and mechanical properties of GH4169 superalloy via high-power laser powder bed fusion[J]. Chinese Journal of Lasers, 52, 0402302(2025).

[2] Bai P K, Huo P C, Zhao Z Y et al. Microstructure evolution and corrosion mechanism of in situ synthesized TiC/TC4 alloy nanocomposites fabricated by laser powder bed fusion[J]. Ceramics International, 49, 2752-2764(2023).

[3] Tan C L, Ma W Y, Deng C et al. Additive manufacturing SiC-reinforced maraging steel: parameter optimisation, microstructure and properties[J]. Advanced Powder Materials, 2, 100076(2023).

[4] Feng X T, Li J M, Geng S et al. Effect of heat treatment on low-cycle fatigue properties of selective laser melted IN718 at room temperature[J]. Chinese Journal of Lasers, 50, 1602301(2023).

[5] de Bartolomeis A, Newman S T, Jawahir I S et al. Future research directions in the machining of Inconel 718[J]. Journal of Materials Processing Technology, 297, 117260(2021).

[6] Hosseini E, Popovich V A. A review of mechanical properties of additively manufactured Inconel 718[J]. Additive Manufacturing, 30, 100877(2019).

[7] Lü X D, Wen B, Du J H. Effects of heat treatment on microstructure and mechanical properties of selective laser melting IN718[J]. Rare Metal Materials and Engineering, 48, 1386-1393(2019).

[8] Guo P F. Microstructure and electrochemical anodic behavior of Inconel 718 fabricated by laser solid forming[D](2019).

[9] Zhao S, Wang E T, Li S et al. Study on microstructure and properties of alumina reinforced Ni-based alloy by laser additive manufacturing[J]. Applied Laser, 37, 634-639(2017).

[10] Chen L, Sun Y Z, Li L et al. In situ TiC/Inconel 625 nanocomposites fabricated by selective laser melting: densification behavior, microstructure evolution, and wear properties[J]. Applied Surface Science, 518, 145981(2020).

[11] Xia M J, Gu D D, Ma C L et al. Microstructure evolution, mechanical response and underlying thermodynamic mechanism of multi-phase strengthening WC/Inconel 718 composites using selective laser melting[J]. Journal of Alloys and Compounds, 747, 684-695(2018).

[12] Yang S Z, Han Q Q, Yin Y Y et al. Effects of micrometer-sized TiB2 on crack mitigation, mechanical and electrochemical performance of a Ni-based alloy fabricated by selective laser melting[J]. Optics & Laser Technology, 142, 107240(2021).

[13] Gu D D, Zhang H M, Dai D H et al. Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance[J]. Composites Part B: Engineering, 163, 585-597(2019).

[14] Tekoglu E, Bae J S, Kim H A et al. Superior high-temperature mechanical properties and microstructural features of LPBF-printed In625-based metal matrix composites[J]. Materials Today, 80, 297-307(2024).

[15] Fereiduni E, Balbaa M, Mahmoud D et al. Processing of hydroxyapatite (HA)‑Ti-6Al-4V composite powders via laser powder bed fusion (LPBF): effect of HA particle size and content on the microstructure and mechanical properties[J]. Journal of Materials Research and Technology, 24, 8766-8781(2023).

[16] Chen W, Zhang J X, Wang D et al. Superior mechanical properties of additively manufactured FV520B matrix composites by microstructure tailoring[J]. Additive Manufacturing, 88, 104259(2024).

[17] Ng C K, Bai K W, Wuu D et al. Additive manufacturing of high-strength and ductile high entropy alloy CoCrFeNiW0.2 composites via laser powder bed fusion and post-annealing[J]. Journal of Alloys and Compounds, 906, 164288(2022).

[18] Cooper D E, Blundell N, Maggs S et al. Additive layer manufacture of Inconel 625 metal matrix composites, reinforcement material evaluation[J]. Journal of Materials Processing Technology, 213, 2191-2200(2013).

[19] Jia Q B, Gu D D. Selective laser melting additive manufacturing of TiC/Inconel 718 bulk-form nanocomposites: densification, microstructure, and performance[J]. Journal of Materials Research, 29, 1960-1969(2014).

[20] Sufiiarov V, Erutin D, Borisov E et al. Selective laser melting of Inconel 718/TiC composite: effect of TiC particle size[J]. Metals, 12, 1729(2022).

[21] Wang Y C, Shi J, Wang Y. Reinforcing inconel 718 superalloy by nano-TiC particles in selective laser melting[C], 8-12(2015).

[22] Yao X L, Moon S K, Lee B Y et al. Effects of heat treatment on microstructures and tensile properties of IN718/TiC nanocomposite fabricated by selective laser melting[J]. International Journal of Precision Engineering and Manufacturing, 18, 1693-1701(2017).

[23] Chayasombat B, Promoppatum P, Srisawadi S et al. Single track formation of TiC reinforced Inconel 718 metal matrix composites using selective laser melting process[J]. The International Journal of Advanced Manufacturing Technology, 131, 4529-4542(2024).

[24] Zhang Z H, Han Q Q, Liu Z Y et al. Influence of the TiB2 content on the processability, microstructure and high-temperature tensile performance of a Ni-based superalloy by laser powder bed fusion[J]. Journal of Alloys and Compounds, 908, 164656(2022).

[25] Zhang Z H, Han Q Q, Yang S Z et al. Laser powder bed fusion of advanced submicrometer TiB2 reinforced high-performance Ni-based composite[J]. Materials Science and Engineering: A, 817, 141416(2021).

[26] Luo Y. Study on building process and mechanical properties of nano TiC/IN718 composites by selective laser melting[D](2024).

[27] Li H, Zhang J X, Lu B H. Forming quality and mechanical properties of TiC-particle-reinforced Inconel 718 composites produced by laser powder bed fusion[J]. Chinese Journal of Lasers, 50, 0802307(2023).

[28] Xiao W H, Lu S Q, Wang Y C et al. Mechanical and tribological behaviors of graphene/Inconel 718 composites[J]. Transactions of Nonferrous Metals Society of China, 28, 1958-1969(2018).

[29] Wang W Q, Wang S Y, Chen F et al. Microstructure and mechanical properties of TiN/Inconel 718 composites fabricated by selective laser melting[J]. Acta Metallurgica Sinica, 57, 1017-1026(2021).

[30] Zhang H M, Gu D D, Ma C L et al. Understanding tensile and creep properties of WC reinforced nickel-based composites fabricated by selective laser melting[J]. Materials Science and Engineering: A, 802, 140431(2021).

[31] Yang Q, Guo P F, Wang Z et al. Influence of pulse laser on microstructure and mechanical property of TiB2/Inconel 718 composite fabricated by laser powder bed fusion[J]. Chinese Journal of Lasers, 52, 0802301(2025).

[32] Ni M. Effect of Sc addition on microstructure and property of IN718 alloy fabricated by laser powder bed fusion[D](2023).

[33] Luu D N, Zhou W, Nai S M L. Influence of nano-Y2O3 addition on the mechanical properties of selective laser melted Inconel 718[J]. Materials Science and Engineering: A, 845, 143233(2022).

[34] Zhao M Q, Song J, Tang Q et al. Laser powder bed fusion of inconel 718-based composites: effect of TiB2 content on microstructure and mechanical performance[J]. Optics & Laser Technology, 167, 109596(2023).

[35] Li Z, Ma X, Zhong C L et al. Microstructure homogeneity and mechanical property improvement of Inconel 718 alloy fabricated by high-deposition-rate laser directed energy deposition[J]. Materials Science and Engineering: A, 832, 142430(2022).

[36] Sui S. Influence of laves phase on the mechanical properties of GH4169 superalloy fabricated by laser solid forming[D](2019).

[37] Kitagawa T, Kubo A, Maekawa K. Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti-6Al-6V-2Sn[J]. Wear, 202, 142-148(1997).

[38] Chen Y, Lu F G, Zhang K et al. Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling[J]. Journal of Alloys and Compounds, 670, 312-321(2016).

[39] Sanaty-Zadeh A. Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect[J]. Materials Science and Engineering: A, 531, 112-118(2012).

[40] Lu H F, Wu L J, Wei H L et al. Microstructural evolution and tensile property enhancement of remanufactured Ti6Al4V using hybrid manufacturing of laser directed energy deposition with laser shock peening[J]. Additive Manufacturing, 55, 102877(2022).

[41] Xu G, Song C C, Zhang H M et al. Spatially heterogeneous microstructure in in-situ TiO-reinforced Ti6Al4V/316L functionally graded material fabricated via directed energy deposition[J]. Additive Manufacturing, 59, 103178(2022).

[42] Voyiadjis G[M]. Advances in damage mechanics: metals and metal matrix composites(2012).

[43] Hall E O. The deformation and ageing of mild steel: III discussion of results[J]. Proceedings of the Physical Society Section B, 64, 747-753(1951).

[44] Fereiduni E, Elbestawi M. Process-structure-property relationships in additively manufactured metal matrix composites[M]. Additive manufacturing of emerging materials, 111-177(2018).

[45] Kozar R W, Suzuki A, Milligan W W et al. Strengthening mechanisms in polycrystalline multimodal nickel-base superalloys[J]. Metallurgical and Materials Transactions A, 40, 1588-1603(2009).