Researching | Optimization of Process Parameters and Performances of Invar-Alloy Lattice Structures Manufactured via Selective Laser Melting

Laser & Optoelectronics Progress, Volume. 61, Issue 17, 1714001(2024)

Optimization of Process Parameters and Performances of Invar-Alloy Lattice Structures Manufactured via Selective Laser Melting

Yiwei He, Jie Chen, Qin Yang, and Xianfeng Shen^*

Author Affiliations

Institute of Mechanical Manufacturing Technology, China Academy of Engineering Physics, Mianyang 621900, Sichuan, China

show less

Abstract Get PDF(in Chinese)

Figures&Tables (17)

References (25)

Paper Information

References(25)

[1] Wassermann E F. The invar problem[J]. Journal of Magnetism and Magnetic Materials, 100, 346-362(1991).

[2] Zheng J J, Li C S, He S et al. Microstructural and tensile behavior of Fe-36%Ni alloy after cryorolling and subsequent annealing[J]. Materials Science and Engineering: A, 670, 275-279(2016).

[3] Zheng J J, Li C S, He S et al. Deformation behavior of Fe-36Ni steel during cryogenic (123‒173 K) rolling[J]. Journal of Iron and Steel Research International, 23, 447-452(2016).

[4] Liu H W. Researches on invar alloy with high performance[D](2015).

[5] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[6] Pan C, Han Y F, Lu J P. Design and optimization of lattice structures: a review[J]. Applied Sciences, 10, 6374(2020).

[7] du Plessis A, Yadroitsava I, Yadroitsev I. Ti6Al4V lightweight lattice structures manufactured by laser powder bed fusion for load-bearing applications[J]. Optics & Laser Technology, 108, 521-528(2018).

[8] Yang Q, Sun K H, Yang C et al. Compression and superelasticity behaviors of NiTi porous structures with tiny strut fabricated by selective laser melting[J]. Journal of Alloys and Compounds, 858, 157674(2021).

[9] DebRoy T, Wei H L, Zuback J S et al. Additive manufacturing of metallic components: process, structure and properties[J]. Progress in Materials Science, 92, 112-224(2018).

[10] Qiu C L, Adkins N J E, Attallah M M. Selective laser melting of invar 36: microstructure and properties[J]. Acta Materialia, 103, 382-395(2016).

[11] Yakout M, Elbestawi M A, Veldhuis S C. Density and mechanical properties in selective laser melting of Invar 36 and stainless steel 316L[J]. Journal of Materials Processing Technology, 266, 397-420(2019).

[12] Yakout M, Elbestawi M A, Veldhuis S C. A study of thermal expansion coefficients and microstructure during selective laser melting of Invar 36 and stainless steel 316L[J]. Additive Manufacturing, 24, 405-418(2018).

[13] Yakout M, Elbestawi M A, Veldhuis S C et al. Influence of thermal properties on residual stresses in SLM of aerospace alloys[J]. Rapid Prototyping Journal, 26, 213-222(2020).

[14] Asgari H, Salarian M, Ma H et al. On thermal expansion behavior of invar alloy fabricated by modulated laser powder bed fusion[J]. Materials & Design, 160, 895-905(2018).

[15] Harrison N J, Todd I, Mumtaz K. Thermal expansion coefficients in invar processed by selective laser melting[J]. Journal of Materials Science, 52, 10517-10525(2017).

[16] He G M, Peng X Q, Zhou H T et al. Superior mechanical properties of Invar36 alloy lattices structures manufactured by laser powder bed fusion[J]. Materials, 16, 4433(2023).

[17] Yakout M, Cadamuro A, Elbestawi M A et al. The selection of process parameters in additive manufacturing for aerospace alloys[J]. The International Journal of Advanced Manufacturing Technology, 92, 2081-2098(2017).

[18] Shao H L, Lin Z X, Zhang Z et al. Selective laser melting process of titanium alloy based on singletrack structure and linear and volumetric energy densities[J]. Laser & Optoelectronics Progress, 59, 0114007(2022).

[19] Wang L, Guo K, Cong J Q et al. Effect of process parameters on defect in selective laser melting of 316L stainless steel[J]. Laser & Optoelectronics Progress, 60, 0514007(2023).

[20] Jiang H Z, Fang J H Y, Chen Q S et al. State of the art of selective laser melted 316L stainless steel: process, microstructure, and mechanical properties[J]. Chinese Journal of Laser, 49, 1402804(2022).

[21] Wegener T, Brenne F, Fischer A et al. On the structural integrity of Fe-36Ni Invar alloy processed by selective laser melting[J]. Additive Manufacturing, 37, 101603(2021).

[22] Benedetti M, du Plessis A, Ritchie R O et al. Architected cellular materials: a review on their mechanical properties towards fatigue-tolerant design and fabrication[J]. Materials Science and Engineering: R: Reports, 144, 100606(2021).

[23] Van Bael S, Kerckhofs G, Moesen M et al. Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures[J]. Materials Science and Engineering: A, 528, 7423-7431(2011).

[24] Płatek P, Sienkiewicz J, Janiszewski J et al. Investigations on mechanical properties of lattice structures with different values of relative density made from 316L by selective laser melting (SLM)[J]. Materials, 13, 2204(2020).

[25] Qiu C L, Yue S, Adkins N J E et al. Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting[J]. Materials Science and Engineering: A, 628, 188-197(2015).

Tools

Get Citation

Copy Citation Text

Yiwei He, Jie Chen, Qin Yang, Xianfeng Shen. Optimization of Process Parameters and Performances of Invar-Alloy Lattice Structures Manufactured via Selective Laser Melting[J]. Laser & Optoelectronics Progress, 2024, 61(17): 1714001

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Lasers and Laser Optics

Received: Oct. 23, 2023

Accepted: Dec. 18, 2023

Published Online: Sep. 9, 2024

The Author Email: Xianfeng Shen (xianfeng_shen@163.com)

DOI:10.3788/LOP232346

CSTR:32186.14.LOP232346

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology