[1] [1] M. S. Sehmbey, M. R. Pais, L. C. Chow. A study of diamond laminated surfaces in evaporative spray cooling［J］. Thin Solid Films, 1992, 212(1-2): 25～29

[2] [2] Wu Deyong, Gao Songxin, Lü Wenqiang et al.. Design of high efficient copper micro-channels cooler for diode laser［J］. High Power Laser and Particle Beams, 2004, 16(7): 840～842

[3] [3] J. Jenifer, Louis C. Chow, Shuye Lei et al.. Thermal management of diode laser arrays［C］. San Jose: Sixteenth IEEE SEMI-THERMTM Symposium, 2000. 154～160

[4] [4] E. A. Silk, P. Bracken. Spray cooling heat flux performance using POCO HTC foam［J］. Journal of Thermophysics and Heat Transfer, 2010, 24(1): 157～164

[5] [5] Wang Yaqing, Liu Minghou, Liu Dong et al.. Experiment study on non-boiling heat transfer performance in spray cooling for high-power laser［J］. Chinese J. Lasers, 2009, 36(8): 1973～1978

[6] [6] Wang Xiao, Zhang Huizhong, Ding Guomin et al.. Laser transmission welding polypropylene plastics［J］. Chinese J. Lasers, 2008, 35(3): 466～471

[7] [7] Jungho Kim. Spray cooling heat transfer: the state of the art［J］. International Journal of Heat and Fluid Flow, 2007, 28(4): 753～767

[8] [8] Wang Yaqing, Liu Minghou, Liu Dong et al.. Effect of test surface temperature on the non-boiling heat transfer performance in spray cooling［J］. Chinese J. Lasers, 2010, 37(1): 115～120

[9] [9] Zhou Zhifu, Xin Hui, Chen Bin et al.. Evaporation characteristics of a single droplet in laser treatment of port wine stain in conjunction with cryogen spray cooling［J］. Chinese J. Lasers, 2008, 35(6): 952～956

[10] [10] A. Marcos, Louis C. Chow, Jian-Hua Du et al.. Spray cooling at low system pressure［C］. Sam Jose: 18th IEEE SEMI-THERM Symposium, 2002, 18: 169～175

[11] [11] W. M. Grissom, F. A. Wierum. Liquid spray cooling of a heated surface［J］. International Journal of Heat and Mass Transfer, 1981, 24(2): 261～271

[12] [12] L. Lin, R. Ponnappan. Heat transfer characteristics of evaporative spray cooling in a closed loop［J］. Internat. J. Heat and Mass Transfer, 2003, 46(20): 3737～3746

[13] [13] D. P. Rini, J. P. Kizito, L. C. Chow. Spray cooling with ammonia on micro-structured surfaces［C］. Piscataway: Thermal and Thermomechanical Phenomena in Electronic Systems ITHERM 2008. 11th Intersociety Conference, 2008, 16: 290～295

[14] [14] Sun Shaopeng, Wang Hong, Zhu Xun et al.. Effects of spray distance on spray cooling with ammonia［J］. Journal of Engineering Thermophysics, 2010, 31(4): 675～678

[15] [15] K. A. Estes, I. Mudawar. Correlation of Sauter mean diameter and critical heat flux for spray cooling of small surface［J］. Internat. J. Heat and Mass Transfer,1995, 38(16): 2985～2996

[16] [16] D. Gorenflo, U. Chandra, C. Kotthoff et al.. Influence of thermophysical properties on pool boiling heat transfer of refrigerants［J］. Int. J. Refrigeration, 2004, 27(5): 492～502