[1] Deng Z Q, Shi S H, Zhou B et al. Laser cladding forming of unequal-height curved arc-shaped thin-wall structures[J]. Chinese Journal of Lasers, 44, 0902005(2017).

[2] Wang X Y, Wang Y F, Jiang H et al. Laser cladding forming of round thin-walled parts with slope angle[J]. Chinese Journal of Lasers, 41, 0103006(2014).

[3] Shamsaei N, Yadollahi A, Bian L K et al. An overview of direct laser deposition for additive manufacturing; part II: mechanical behavior, process parameter optimization and control[J]. Additive Manufacturing, 8, 12-35(2015). http://www.sciencedirect.com/science/article/pii/S2214860415000329

[4] Xiao Y, Lu Y Y, Guo X X et al. Study on process and properties of thin-walled structure part by laser additive manufacturing[J]. Laser & Optoelectronics Progress, 55, 081405(2018).

[5] Guan K, Wang Z M, Gao M et al. Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel[J]. Materials & Design, 50, 581-586(2013). http://www.sciencedirect.com/science/article/pii/S0261306913002562

[6] Guo P, Zou B, Huang C Z et al. Study on microstructure, mechanical properties and machinability of efficiently additive manufactured AISI 316L stainless steel by high-power direct laser deposition[J]. Journal of Materials Processing Technology, 240, 12-22(2017). http://www.sciencedirect.com/science/article/pii/S0924013616303181

[7] Dinda G P, Dasgupta A K, Mazumder J. Laser aided direct metal deposition of Inconel 625 superalloy: microstructural evolution and thermal stability[J]. Materials Science and Engineering: A, 509, 98-104(2009). http://www.sciencedirect.com/science/article/pii/S0921509309000215

[8] Mertens A, Reginster S, Contrepois Q et al[J]. mechanical properties of stainless steel AISI 316L processed by selective laser melting. Materials Science Forum, 783/784/785/786, 898-903(2014).

[9] Chen D N, Liu T T, Liao W H et al. Temperature field during selective laser melting of metal powder under different scanning strategies[J]. Chinese Journal of Lasers, 43, 0403003(2016).

[10] Yu J, Lin X, Ma L et al. Influence of laser deposition patterns on part distortion, interior quality and mechanical properties by laser solid forming (LSF)[J]. Materials Science and Engineering: A, 528, 1094-1104(2011). http://www.sciencedirect.com/science/article/pii/S092150931001124X

[11] Ding L, Li H X, Wang Y D et al. Heat treatment on microstructure and tensile strength of 316 stainless steel by selective laser melting[J]. Chinese Journal of Lasers, 42, 0406003(2015).

[12] Tillmann W, Schaak C, Nellesen J et al. Hot isostatic pressing of IN718 components manufactured by selective laser melting[J]. Additive Manufacturing, 13, 93-102(2017). http://www.sciencedirect.com/science/article/pii/S2214860416300495

[13] Wang X Y, Guo H R, Xu W J et al. Laser cladding of a ramp thin wall with a variable[J]. Advanced Materials Research, 216, 419-423(2011). http://www.scientific.net/AMR.216.419

[14] Zhu G X, Li D C, Zhang A F et al. The influence of laser and powder defocusing characteristics on the surface quality in laser direct metal deposition[J]. Optics & Laser Technology, 44, 349-356(2012). http://www.sciencedirect.com/science/article/pii/S0030399211002027

[15] Lai Y B, Bo Y, Wang D Y. Theoretical calculation and experimental verification of Z increment in laser metal direct manufacturing[C]∥International Symposium on Mechanical Engineering and Material Science (ISMEMS 2017), May 25(2017).

[16] Cao J, Liu F C, Lin X et al. Effect of overlap rate on recrystallization behaviors of laser solid formed inconel 718 superalloy[J]. Optics & Laser Technology, 45, 228-235(2013). http://www.sciencedirect.com/science/article/pii/S0030399212003143

[17] Wen S F, Shuai L, Wei Q S et al. Effect of molten pool boundaries on the mechanical properties of selective laser melting parts[J]. Journal of Materials Processing Technology, 214, 2660-2667(2014).

[18] Amine T, Newkirk J W, Liou F. An investigation of the effect of direct metal deposition parameters on the characteristics of the deposited layers[J]. Case Studies in Thermal Engineering, 3, 21-34(2014). http://www.sciencedirect.com/science/article/pii/S2214157X14000070

[19] Abdalkariem Hassan, Hassan A. 增材制造中激光扫描路径对倾斜薄壁件力学性能的影响研究[D]. 大连: 大连理工大学, 29-34(2016).

     Effect of slicing trajectories on mechanical properties of sloped thin-walled part produced by laser additive manufacturing[D]. Dalian: Dalian University of Technology, 29-34(2016).

[20] Wang L, Felicelli S D, Pratt P. Residual stresses in LENS-deposited AISI 410 stainless steel plates[J]. Materials Science and Engineering: A, 496, 234-241(2008). http://www.sciencedirect.com/science/article/pii/S0921509308005868