[1] [1] Yamamoto K, Kinsho M. Development of the collimat system f the 3 GeV rapid cycling synchrotron[C]Proceedings of the 2005 Particle Accelerat Conference. 2005: 13651367.

[2] Wei Tao, Qin Qing. Design of the two-stage collimation system for CSNS/RCS[J]. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 566, 212-217(2006).

[3] [3] Wei Tao. Beam loss studies on the rapid cycling synchrotron of China Spallation Neutron Source[D]. Beijing: Institute of High Energy Physics, Chinese Academy of Sciences, 2008: 5355

[4] [4] Wang Na, Wang Sheng, Huang Nan, et al. The design of beam collimation system f CSNSRCS[C]Proceedings of HB2010. 2010: 572575.

[5] Yu Jiebing, Wu Qingbiao, Wu Xuan, . Cooling design of secondary collimator absorbers at CSNS/RCS[J]. High Power Laser and Particle Beams, 30, 085105(2018).

[6] Zou Yiqing, Kang Ling, Qu Huamin, . Chromatic correction for CSNS/RCS and nonlinear effects of chromaticity sextupoles[J]. High Power Laser and Particle Beams, 25, 741-745(2013).

[7] Zou Yiqing, Wang Na, Kang Ling, et al. Thermal analysis and cooling structure design of the primary collimator in CSNS/RCS[J]. Chinese Physics C, 37, 057004(2013).

[8] [8] Yang Jianquan. Collimation method studies f the SPPC[D]. Beijing: Institute of High Energy Physics, Chinese Academy of Sciences, 2019: 8183

[9] [9] Smith H V, Adams D J, Jones B, et al. Activation models of the ISIS collects[C]Proceedings of 5th International Particle Accelerat Conference. 2014: 893895.

[10] [10] Yamamoto K. The beam collimat system of JPARC rapid cycling synchrotron[C]Proceedings of HB2008. 2008: 155.

[11] [11] Yamamoto K, Okazaki M, Hirooka Y, et al. Present status of beam collimation system of JPARC RCS[C]Proceedings of EPAC 2006. 2006: 32003202.

[12] Ishibashi T, Terui S, Suetsugu Y, et al. Movable collimator system for SuperKEKB[J]. Physical Review Accelerators and Beams, 23, 053501(2020).

[13] [13] Bertarelli A, Dallocchio A, Gentini L, et al. Mechanical engineering design of the LHC Phase II collimats[C]Proceedings of the 1st International Particle Accelerat Conference. 2010: 16831685.

[14] [14] Boccard C, Dallocchio A, Bertarelli A, et al. Embedded collimat beam position monits[C]Proceedings of the 10th European Wkshop on Beam Diagnostics Instrumentation f Particle Accelerats. 2011: 8082.

[15] [15] Ge Shaoyan. Thermal radiation properties of metals other substances[M]. Beijing: Science Press, 1958

[16] Xu Lingshun, Li Yong, Xu Zhongtang, . Comparation of several different blacken technologies of copper surface[J]. China Surface Engineering, 26, 75-79(2013).

[17] Zhang Zhongcheng, Zhang Hongbing. Study on surface blackening treatment of brass[J]. China Surface Engineering, 16, 41-42,48(2003).

[18] Liu Binyun, Xue Huaiyu, Wang Qun, . Environmentally friendly non-formaldehyde PTH darkness preliminary investigation[J]. Printed Circuit Information, 48-50(2007).

[19] [19] Yu Jiebing, Xu Shouyan, Wu Qingbiao, et al. Operation status of CSNSRCS transverse collimation system[C]Proceedings of the 12th International Particle Accelerat Conference. 2021: 18621864.

[20] Guan Yuhui, Song Hong, Dong Haiyi, . Measurement of low outgassing-rate in self-developed pumping-path switching algorithm: a methodological study[J]. Chinese Journal of Vacuum Science and Technology, 40, 524-530(2020).

[21] Zhang Dixin, Zeng Xiangpo, Feng Yan, . Review of measuring methods of outgassing rate[J]. Vacuum, 47, 1-5(2010).

[22] Guo Dizhou, Zhang Junhui, Meng Jun, . Evaluation of high temperature outgassing rates of stainless steel in method of switching between two pumping paths[J]. Chinese Journal of Vacuum Science and Technology, 31, 368-371(2011).

[23] Feng Yan, Zeng Xiangpo, Zhang Dixin, . Design of measurement apparatus for material outgassing rates by orifice conductance method[J]. Journal of Astronautic Metrology and Measurement, 30, 66-69(2010).

[24] Zeng Xiangpo, Zhang Dixin, Feng Yan, . Study on measuring outgassing rate of materials via orifice throughput method[J]. Vacuum, 47, 55-58(2010).