[1] WANG Ying, ZHANG Rui, ZHANG Yuan. Constructing method of calibration feature points used for circle structure light vision sensor[J]. Journal of Applied Optics, 33, 884-888(2012).

[2] FU Qinwei, DU Xuan, ZHANG Yan et al. Extraction of laser stripe center on translucent glue strip surface[J]. Optics and Precision Engineering, 29, 701-709(2021).

[3] XU Xiaobin, FEI Zhongwen, YANG Jian et al. Line structured light calibration method and centerline extraction: a review[J]. Results in Physics, 19, 103637.(2020).

[4] LYU Shenzhen, SUN Qiang, ZHANG Yuyuan et al. Projector distortion correction in 3D shape measurement using a structured-light system by deep neural networks[J]. Optics Letters, 45, 204-207.(2020).

[5] ZHU Tongjing, ZHOU Ping, LIU Xinran et al. Crucial algorithms for structural light 3D measurement system calibration[J]. Journal of Applied Optics, 35, 848-852(2014).

[6] WANG Yonghong, ZHANG Qian, HU Yin et al. 3D small-field surface imaging based on microscopic fringe projection profilometry: a review[J]. Chinese Optics, 14, 447-457(2021).

[7] LI Wentao, WANG Peijun, TANG Xiaomin. Accurate and rapid contour extraction of visual measurement for rail wear[J]. Optics and Precision Engineering, 26, 238-244(2018).

[8] GUO Xiaozhong, SHI Zhaoyao, YU Bo et al. 3D measurement of gears based on a line structured light sensor[J]. Precision Engineering, 61, 160-169(2020).

[9] WU Xiaojun, TANG Na, LIU Bo et al. A novel high precise laser 3D profile scanning method with flexible calibration[J]. Optics and Lasers in Engineering, 132, 105938.(2020).

[10] JOSÉ S, AMALIA G, JUAN R et al. LED source interferometer for microscopic fringe projection profilometry using a gates' interferometer configuration[J]. Optics and Lasers in Engineering, 149, 106822.(2022).

[11] KUMAR V, DUBEY A K, GUPTA M et al. Speckle noise reduction strategies in laser-based projection imaging, fluorescence microscopy, and digital holography with uniform illumination, improved image sharpness, and resolution[J]. Optics & Laser Technology, 141, 107079.(2021).

[12] XIA Linglin. Measurement and evaluation for surface topography of laser roughen steel rolls[D](2012).

[13] CHEN K P, SHI T L, LIU Q et al. Microscopic three-dimensional measurement based on telecentric stereo and speckle projection methods[J]. Sensors (Basel, Switzerland), 18, 3882.(2018).

[14] ZHANG J, CHEN X, XI J et al. Paraxial analysis of double-sided telecentric zoom lenses with four components[J]. Optical Engineering, 53, 115103.(2014).

[15] SHANG Z Y, WANG J H, ZHAO L et al. a Measurement of gear tooth profiles using incoherent line structured light[J]. Measurement, 189, 110450.(2022).

[16] PEI Yongchen, XIE Hailiang, TAN Qingchang. A non-contact high precision measuring method for the radial runout of cylindrical gear tooth profile[J]. Mechanical Systems and Signal Processing, 138, 106543.(2020).

[17] YAN Z H, HU F T, FANG J et al. Multi-line laser structured light fast visual positioning system with assist of TOF and CAD[J]. Optik, 269, 169923.(2022).

[18] WANG Le, FANG Yue, WANG Shengchun et al. Research on simulation model of rail contour measurement system based on Zemax[J]. Chinese Journal of Lasers, 48, 191-103(2021).

[19] WANG Y Z, CHEN J Q, PENG Y F. Surface reconstruction of microscale objects based on grid-patterned structured-light measurements[J]. Microscopy and Microanalysis, 28, 152-172.(2022).

[20] YAO Min. Measurement method for video probe based on line-structured light[J]. Journal of Applied Optics, 37, 91-95(2016).

[21] LIU J H, WANG Y Z. 3D surface reconstruction of small height object based on thin structured light scanning[J]. Micron, 143, 103022(2021).

[22] WANG Y, GENG B, LONG C. Contour extraction of a laser stripe located on a microscope image from a stereo light microscope[J]. Microscopy Research and Technique, 82, 260-271.(2019).

[23] HOLST G C. Imaging system performance based upon Fλ/d[J]. Optical Engineering, 46, 103204.(2007).