Researching | Fabrication of High Strength and Low Thermal Conductivity Graphite/Ceramic Composites by Selective Laser Sintering and Gelcasting

Laser & Optoelectronics Progress, Volume. 56, Issue 9, 091404(2019)

Fabrication of High Strength and Low Thermal Conductivity Graphite/Ceramic Composites by Selective Laser Sintering and Gelcasting

Haihua Wu^*, Yu Sun, Kui Chen, and Yafeng Li

Author Affiliations

Hubei Key Laboratory of Hydroelectric Machinery Design and Maintenance, China Three Gorges University, Yichang, Hubei 443002, China

show less

Abstract Get PDF(in Chinese)

Figures&Tables (8)

References (16)

Paper Information

References(16)

[1] Kumar S, Kruth J P. Composites by rapid prototyping technology[J]. Materials & Design, 31, 850-856(2010). http://www.sciencedirect.com/science/article/pii/S0261306909003860

[2] Huang S H, Liu P, Mokasdar A et al. Additive manufacturing and its societal impact: a literature review[J]. The International Journal of Advanced Manufacturing Technology, 67, 1191-1203(2013). http://www.tandfonline.com/servlet/linkout?suffix=CIT0040&dbid=16&doi=10.1080%2F09544828.2018.1454589&key=10.1007%2Fs00170-012-4558-5

[3] Pham D T, Gault R S. A comparison of rapid prototyping technologies[J]. International Journal of Machine Tools and Manufacture, 38, 1257-1287(1998). http://www.sciencedirect.com/science/article/pii/S0890695597001375

[4] Kruth J P, Levy G, Klocke F et al. Consolidation phenomena in laser and powder-bed based layered manufacturing[J]. CIRP Annals, 56, 730-759(2007). http://www.sciencedirect.com/science/article/pii/S0007850607001540

[5] Shahzad K, Deckers J, Kruth J P et al. Additive manufacturing of alumina parts by indirect selective laser sintering and post processing[J]. Journal of Materials Processing Technology, 213, 1484-1494(2013). http://www.sciencedirect.com/science/article/pii/S0924013613001052

[6] Maeda K. Childs T H C. Laser sintering (SLS) of hard metal powders for abrasion resistant coatings[J]. Journal of Materials Processing Technology, 149, 609-615(2004). http://www.sciencedirect.com/science/article/pii/S0924013604002195

[7] Wang Q, Han X H, Sommers A et al. A review on application of carbonaceous materials and carbon matrix composites for heat exchangers and heat sinks[J]. International Journal of Refrigeration, 35, 7-26(2012). http://www.sciencedirect.com/science/article/pii/S0140700711002179

[8] Huang J F, Zeng X R, Li H J et al. Influence of the preparation temperature on the phase, microstructure and anti-oxidation property of a SiC coating for C/C composites[J]. Carbon, 42, 1517-1521(2004). http://www.sciencedirect.com/science/article/pii/S0008622304000880

[9] Wu H H, Xiao L N, Wang J et al. Preparation and performance of conductive composites embedded in honeycomb-like graphite skeletons[J]. Laser & Optoelectronics Progress, 55, 011417(2018).

[10] Wu H H, Yan J N, Li T F et al. Experimental study on molding precision for graphite/phenolic resin mixed powders processed by selective laser sintering[J]. Laser & Optoelectronics Progress, 54, 081405(2017).

[11] Wu H H, Li T F, Xiao L N et al. Research on forming process of flake graphite powder by selective laser sintering[J]. Laser & Optoelectronics Progress, 53, 101409(2016).

[12] Montanaro L, Perrot C, Esnouf C et al. Sintering of industrial mullites in the presence of magnesia as a sintering aid[J]. Journal of the American Ceramic Society, 83, 189-196(2008). http://onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.2000.tb01169.x/full

[13] Souto P M, Menezes R R. Kiminami R H G A. Sintering of commercial mulite powder: effect of MgO dopant[J]. Journal of Materials Processing Technology, 209, 548-553(2009).

[14] Manocha L M, Bhatt H, Manocha S M. Development of carbon/carbon composites by co-carbonization of phenolic resin and oxidised pan fibers[J]. Carbon, 34, 841-849(1996). http://www.sciencedirect.com/science/article/pii/0008622395002014

[15] Tzeng S S, Chr Y G. Evolution of microstructure and properties of phenolic resin-based carbon/carbon composites during pyrolysis[J]. Materials Chemistry and Physics, 73, 162-169(2002). http://www.sciencedirect.com/science/article/pii/S0254058401003583

[16] Jia G Y, Deng Y X. Investigation on the gelation process of silica sol[J]. Bulletin of the Chinese Ceramic Society, 23, 91-93(2004).

Tools

Get Citation

Copy Citation Text

Haihua Wu, Yu Sun, Kui Chen, Yafeng Li. Fabrication of High Strength and Low Thermal Conductivity Graphite/Ceramic Composites by Selective Laser Sintering and Gelcasting[J]. Laser & Optoelectronics Progress, 2019, 56(9): 091404

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Lasers and Laser Optics

Received: Nov. 11, 2018

Accepted: Dec. 6, 2018

Published Online: Jul. 5, 2019

The Author Email: Haihua Wu (wuhaihua@ctgu.edu.cn)

DOI:10.3788/LOP56.091404

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology