[1] [1] I. Schneega, J.M.Khler．Flow-through polymerase chain reactions in chip thermocyclers [J]. Rev.Molec.Biotechnol., 2001, 82(2)：101～121

[2] [2] S.C.Jakeway, A.J.de Mello, E.L.Russell. Miniaturized total analysis systems for biological analysis [J]．Fresenius J．Anal．Chem．, 2000, 366：525～539

[3] [3] H．Nakano, K．Matsuda, M．Yohda et al.. High speed polymerase chain reaction in constant flow[J]．Biosci., Biotechnol., Biochem., 1994, 58(2)：349～352

[4] [4] M．U．Kopp, A．J．de Mello, A．Manz．Chemical amplification：continuous-flow PCR on a chip [J]．Science, 1998, 280：1046～1048

[5] [5] J．A．Kim, J．Y．Lee, S．Y．Seong et al．．Fabrication and characterization of a PDMS-glass hybrid continuous-flow PCR chip [J]．Biochem．Eng．J．, 2006, 29 (1-2)：91～97

[6] [6] C．Y．Yu, W．S．Liang, Iching Kuan et al．．Fabrication and characterization of a flow-through PCR device with integrated chromium resistive heaters [J]．J．Chin．Inst．Chem．Eng．, 2007, 38(3-4)：333～339

[7] [7] Chen Tao, Yao Liying, Qi Heng et al.．Some key problems in PMMA based PCR microfluidic biochip by excimer laser micromachining [J]．Chinese J. Lasers, 2007, 34(Supp.)：146～150

[8] [8] I．Schneega, R．Brutigam, J．M．Khler．Miniaturized flow-through PCR with different template types in a silicon chip thermocycler [J]．Lab Chip, 2001, 1：42～49

[9] [9] Xing Chen, Dafu Cui, Changchun Liu et al．．Microfabrication and characterization of porous channels for DNA purification [J]．J．Micromech．Microeng．, 2007, 17(1)：68～75

[10] [10] P．J．Obeid, T．K．Christopoulos et al．．Microfabricated device for DNA and RNA amplification by continuous-flow polymerase chain reaction and reverse transcription-polymerase chain reaction with cycle number selection [J]．Anal．Chem．, 2003, 75(2)：288～295

[11] [11] S．F．Li, D．Y．Fozdar, M．F．Ali et al.. A continuous-flow polymerase chain reaction microchip with regional velocity control [J]．J. Microelectromechanical Systems, 2006, 15(1)：223～236

[12] [12] J．Felbel, A．Reichert, M．Kielpinski et al．．Reverse transcription-polymerase chain reaction (RT-PCR) in flow-through micro-reactors：Thermal and fluidic concepts [J]．Chem．Eng．J．, 2008, 135S：S298～S302

[13] [13] A．Gerlach, G．Knebel, A．E．Guber et al．．Microfabrication of single-use plastic microfluidic devices for high-throughput screening and DNA analysis [J]．Microsyst．Technol., 2002, 7： 265～268

[14] [14] M．Hashimoto, P．C．Chen, M．W．Mitchell et al．．Rapid PCR in a continuous flow device [J]．Lab Chip, 2004, 4：638～645

[15] [15] O．Rtting, W．Ropke, H．Becker et al．．Polymer microfabrication technologies [J]．Microsyst．Technol．, 2002, 8：32～36

[16] [16] A．Costela, I．Garciamoreno, F．Florido et al．．Laser ablation of polymeric materials at 157 nm [J]．J．Appl．Phys．, 1995, 77(6)：2343～2350

[17] [17] Qi Heng, Yao Liying, Wang Tong et al．．Excimer laser micromachining of PMMA based PCR micro-fluidic chip [J]．Microfab．Technol．, 2006, 1：16～19

[18] [18] Qi Heng, Chen Tao, Yao Liying et al．．Simple air-operated sampling device used for continuous-flow PCR microfluidic biochip [C]．μ-TAS 2007．Dalian：Dalian Institute of Chemical Physics, Chinese Academy of Sciences, 2007：79～80

[19] [19] H．Klank, J．P．Kutter, O．Geschke．CO2-laser micromachining and back-end processing for rapid production of PMMA-based microfluidic systems [J]．Lab Chip, 2002, 2：242～246

[20] [20] Fu Jianzhong, Xiang Hengfu, Chen Zichen．Modeling research of CO2 laser direct writing polymer microfluidic chip [J]．Chem．J．Chinese U．, 2004, 25：54～56

[21] [21] D．J．Yuan, S．Das．Experimental and theoretical analysis of direct-write laser micromachining of polymethyl methacrylate by CO2 laser ablation [J]．J．Appl．Phys．, 2007, 101：024901