[1] [1] W. Pompe, H.-A. Bahr, I. Pflugbeil el at.. Laser induced creep and fracture in ceramics[J]. Materials Science and Engineeing, 1997, A233: 167～175

[2] [2] Dong-Joo Lee. Estimating tensile creep rate of ceramics from flexure data[J]. Journal of the European Ceramic Society, 1996, (16): 1377～1383

[3] [3] J. Xu, R. M. Mcmeeking. Finite element simulation of powder consolidation in the formation of fiber reinforced composite materials[J]. Int. Mech. Sci., 1995, 37(8): 883～897

[4] [4] Min Lu, K. J. Hemke. Intermediate temperature creep properties of gamma TiAl[J]. Acta Mater, 1997, 45(9): 3573～3585

[5] [5] Cheng Liu, Ping Liu, Zhenbo Zhao et al.. Room temperature creep of a high strength steel[J]. Materials and Design, 2001, (22): 325～328

[6] [6] M. Sexsmith, T. Troczynski. Development of peel adhesion test for thermal spray coatings[C]. Proc. ITC ′95, 1995. 897～901

[7] [7] J. Lesage, P. Demarecaux, D. Chicat et al.. Adhesion of thermal sprayed coatings: A model for the interface indentation test[C]. Porc. ITSC ′95, 1995. 891～896

[8] [8] B. Rother,L. A. Donohue, H. Kapple. Quantification of the interface strength between (Ti,Zr)N coatings a high speed steel[J]. Surf. Coat. Technol., 1996, 82: 214～217

[9] [9] Herrera-Franco P. J., Drzall L. T. Comparison of methods for the measurement of fibre/matrix adhesion in composites[J]. Composites, 1992, 23(1):2～27

[10] [10] Fouad Attar, Thomas Johannesson. Adhesion evaluation of thin ceramic coatings on tool using the scratch testing technique[J]. Surf. Coat. Technol., 1996, 78: 87～95

[11] [11] B. Rother, D. A. Dietrich. Evaluation of interface strength between TiN coatings and hardened high speed steel substrates[J]. Thin Solid Films, 1995, 625: 74～75

[12] [12] H. Ollendorf, D. Schneider. A comparative study of adhesion test methods for hard coatings[J]. Surf. Coat. Technol., 1999, 113: 86～102

[13] [13] Zhou Ming. The paper of doctor degree[D]. Jiangshu: Jiangsu University,2002. 5～6

[14] [14] Zhou Ming, Zhang Yongkang, Cai Lan. Detemination of the interfacial bonding strength of thin films by the laser spallation technique[J]. Science in China, Ser. E, 2002, 32(1): 28～36

[15] [15] Xi Mingzhe, Yu Gang. Numerical simulation for the transient temperature field of 3D moving laser molten pool[J]. Chinese J. Lasers, 2004， 31(12): 1527～1532

[16] [16] Fan Muhui, Li Songnian. Finite element method for creep analysis[J]. J. Hebei Institute of Technology, 1995， 24(4): 44～50

[17] [17] K. Klotz, H.-A. Bahr, H. Balke et al.. Creep analysis and laser-induced cracking of (Ti,Al)N coatings[J]. Thin Solid Films, 2002, 413: 131～138

[18] [18] Zhao Qiang, Fan Zhengxiu, Zhou Dongping et al.. Improving the laser damage resistivity of aluminum mirrors and Si windows by depositing dielectric protection layers[J]. Chinese J. Lasers, 1996， A23(1): 85～90

[19] [19] Zhao Qiang, Fan Zhengxiu, Wang Zhijiang et al.. Digital analysis of laser induced thermal process in optical coatings[J]. Acta Optica Sinica, 1999, 19(8): 1019～1023