[1] [1] SHAN C, ZHAO Y A, ZHANG X H, et al. Study on laser damage threshold of optical element surface based on gaussian pulsed laser spatial resolution［J］. Chinese Journal of Lasers, 2018,45(1):0104002(in Chinese).

[2] [2] LING X L, LIU Sh H, LIU X F. Enhancement of laser-induced da-mage threshold of optical coatings by ion-beam etching in vacuum environment［J］. Optik, 2020,200:163429.

[3] [3] VIKTRIA C, ZSOLT B, NAGY B J, et al. Ultrafast multipulse damage threshold of femtosecond high reflectors［J］. Applied Optics, 2018,57(2):340-343.

[4] [4] KUMAR S, SHANKAR A, KISHORE N, et al. Laser-induced da-mage threshold study on TiO2/SiO2 multilayer reflective coatings［J］. Indian Journal of Physics, 2020,94:105-115.

[5] [5] LI Y Y, ZHANG W Y, LIU Zh, et al. Cumulative effect of thin film laser damage under S-on-1 measurement mode［J］. Laser Technology, 2018,42(1):39-42(in Chinese).

[6] [6] TALBI A, SEMMAR N, TABBAL M, et al. Femtosecond laser irradiation of titanium oxide thin films: Accumulation effect under IR beam［J］. Applied Physics, 2020,A126(5):390.

[7] [7] LING X L, LIU Sh H, LIU X F, et al. The effect of water vapor on nanosecond laser damage resistance of optical coatings in vacuum［J］. Optik, 2018,164:654-660.

[8] [8] WANG H X, SHEN L, LI Ch F, et al. Analysis and experimental investigation of laser induced damage of optics［J］. Chinese Journal of Lasers, 2017,44(3):0302006(in Chinese).

[9] [9] GE J M. Analysis and diagnosis on optical film laser damage［D］.Nanjing: Nanjing University of Sciences and Technology, 2018:101-106(in Chinese).

[10] [10] LAMAIGNER L, VEINHARD M, TOURNEMENNE F, et al. A powerful tool for comparing different test procedures to measure the probability and density of laser induced damage on optical materials［J］. Review of Scientific Instruments, 2019,90(12):125102.

[11] [11] KUMAR S, SHANKAR A, KISHORE N, et al. Laser-induced da-mage threshold study on TiO2/SiO2 multilayer reflective coatings［J］. Journal of Cleaner Production, 2020,94(1):105-115.

[12] [12] CHENG Y, LU Y M, TANG H, et al. Researches on laser damage resistance of optical films［J］. High Power Laser and Particle Beams, 2016,28(7):070201(in Chinese).

[13] [13] ZHENG Y L, HU Y H, ZHAO N X, et al. Analysis of the influence of pulse width and repetition frequency on damage threshold of HgCdTe detector［J］. Laser Technology, 2018,42(2):265-270(in Chinese).

[14] [14] WANG F, LI Y Y,CHE Y, et al. Measurement system of flattop laser induced damage threshold to film［J］. Acta Photonica Sinica, 2016,45(3):0314003(in Chinese).

[15] [15] GUO K Sh, WANG Y Zh, CHEN R Y, et al. Effects of structural defects on laser-induced damage of 355-nm high reflective coatings sputtered on etched substrates［J］. Optical Materials, 2019,89:173-177.

[16] [16] YIN J H, CAO Y ZH, YAN Y D, et al. Laser-induced damage of black glass before and after surface treatment by containing impurities-SiO2 film during ultra clean manufacturing ［J］. Journal of Cleaner Production, 2020,257:120360.

[17] [17] YAO J K, YE F, FAN P, et al. Ultraviolet laser damage mechanisms of amorphous InGaZnO4 thin films［J］. Optical Materials Express, 2019,9(6):2545-2552.

[18] [18] XU J Q,SU J H, GE J M, et al. Measurement uncertainty of laser-induced damage threshold of the optical thin films［J］. Infrared and Laser Engineering, 2017,46(8):0806007(in Chinese).

[19] [19] WANG G X, SU J H, XU J Q, et al. Misjudgment elimination method on identification of thin film damage by plasma flash method［J］. Spectroscopy and Spectral Analysis, 2018,38(11):3341-3346(in Chinese).