[1] [1] Pan Hu, Zhao Jianfeng, Liu Yunlei, et al.. Controllability research on dilution ratio of nickel-based superalloy by laser cladding reparation[J]. Chinese J Lasers, 2013, 40(4): 0403007.

[2] [2] Chen Lie, Tao Ran, Liu Dun, et al.. Analysis and control of the cracking tendency on helical tooth surface during laser cladding[J]. Chinese J Lasers, 2014, 41(11): 1103005.

[3] [3] Zhou Xianglin, Zhang Jishan. Wu Xiangkun. Advanced Cold Spray Technology and Application[M]. Beijing: China Machine Press, 2011: 2-5.

[4] [4] Matthew B, Andrew C, William O. The laser- assisted cold spray process and deposit characterization[J]. Surface and Coatings Technology, 2009, 203(19): 2851-2857.

[5] [5] Andrew C, Matthew B, William O N. The laser-assisted cold spray process[J]. The Laser User, 2008, 53: 30-31.

[6] [6] Luo X, Olivier H. Gas dynamic principles and experimental investigations of shock tunnel produced coatings[J]. Journal of Thermal Spray Technology, 2009, 18(4): 546-554.

[7] [7] Mo K, Gary W R, Bertrand J. Shock-wave induced spraying: Gas and particle flow and coating analysis[J]. Surface and Coatings Technology, 2012, 207: 435-442.

[8] [8] Legoux J G, Irissou E, Moreau C. Effect of substrate temperature on the formation mechanism of cold-sprayed aluminum, zinc and tin coatings[J]. Journal of Thermal Spray Technology, 2007, 16(5-6): 619-626.

[9] [9] Fukumoto M, Wada H, Tanabe K, et al.. Effect of substrate temperature on deposition behavior of copper particles on substrate surfaces in the cold spray process[J]. Journal of Thermal Spray Technology, 2007, 16(5-6): 643-650.

[10] [10] Liu Yuzhen, Gui Yewei. The properties and applications of Stellite alloys (Ⅰ)[J]. Materials for Mechanical Engineering, 1992, 16(5): 1-6.

[11] [11] Liu Yuzhen, Gui Yewei. The properties and applications of stellite alloys (Ⅱ)[J]. Materials for Mechanical Engineering, 1992, 16(6): 1-5,47.

[12] [12] Zhao Wenyu, Lu Fenggui, Li Zhuguo, et al.. Study on high-cycle fatigue behavior of laser-cladding Stellite 6 on 17-4PH stainless steel[J]. Chinese J Lasers, 2014, 41(10): 1003014.

[13] [13] Zhong Minlin, Liu Wenjin. Comparative research on cracking tendency in powder feeding laser cladding stellite and NiCrSiB alloys [J]. Chinese J Lasers, 2002, 29(11): 1031-1036.

[14] [14] Zhang Weiping, Lu Donghua, Yu Juanjuan, et al.. Application of zirconia toughening mechanism on laser cladding[J]. Chinese J Lasers, 2014, 41(11): 1103008.

[15] [15] Sun S, Durandet Y, Brandt M. Parametric investigation of pulsed Nd∶YAG laser cladding of stellite 6 on stainless steel[J]. Surface and Coatings Technology, 2005, 194(2): 225-231.

[16] [16] Singh R, Kumar D, Mishra S K, et al.. Laser cladding of Stellite 6 on stainless steel to enhance solid particle erosion and cavitation resistance[J]. Surface and Coatings Technology, 2014, 251: 87-97.

[17] [17] Grujicic M, Saylor J R, Beasley D E, et al.. Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process[J]. Applied Surface Science, 2003, 219(3): 211-227.

[18] [18] Champagne J V K, Helfritch D, Leyman P, et al.. Interface material mixing formed by the deposition of copper on aluminum by means of the cold spray process[J]. Journal of Thermal Spray Technology, 2005, 14(3): 330-334.

[19] [19] Li W Y, Li C J, Yang G J. Effect of impact-induced melting on interface microstructure and bonding of cold-sprayed zinc coating [J]. Applied Surface Science, 2010, 257(5): 1516-1523.

[20] [20] Li W Y, Zhang C, Guo X, et al.. Study on impact fusion at particle interfaces and its effect on coating microstructure in cold spraying [J]. Applied Surface Science, 2007, 254(2): 517-526.

[21] [21] Lee H, Shin H, Lee S, et al.. Effect of gas pressure on Al coatings by cold gas dynamic spray[J]. Materials Letters, 2008, 62(10-11): 1579-1581.