[1] [1] ZHANG X H, MENG Y, ZHANG W. The state of the art and trend of carbon fiber reinforced composites［J］. Fiber Composites, 2004, 21(1): 50-53.

[2] [2] FAN X. Application status and development trend of carbon fiber reinforced plastic［J］. Chemical Industry, 2019, 37(4): 12-16.

[3] [3] HUANG M J. Study on process optimization and surface integrity of CFRP material following abrasive waterjet cutting process［D］. Changsha: Hunan University, 2019.

[4] [4] WEBER R, HAFNER M, MICHALOWSKI A, et al. Minimum damage in CFRP laser processing［J］. Physics Procedia, 2011, 12: 302-307.

[5] [5] WEBER R, FREITAG C, KONONENKO T V, et al. Short-pulselaser processing of CFRP［J］. Physics Procedia, 2012, 39: 137-146.

[6] [6] SALAMA A, LI L, MATIVENGA P, et al. High-power picosecond laser drilling/machining of carbon fibre-reinforced polymer (CFRP) composites［J］. Applied Physics A, 2016, 122(2): 1-11.

[7] [7] WOLYNSKI A, HERRMANN T, MUCHA P, et al. Laser ablation of CFRP using picosecond laser pulses at different wavelengths from UV to IR［J］. Physics Procedia, 2011, 12: 292-301.

[8] [8] YANG L J, HOU C J, ZHANG M, et al. Study on UV laser cutting carbon fibre reinforced composites［J］. Applied Mechanics and Materials, 2014, 633-634: 738-742.

[9] [9] ZHANG X J, SHEN J J, WANG J C. Study on the process and wear resistance of picosecond laser surface texturing［J］. Applied Laser, 2020, 40(1): 86-90.

[10] [10] PANG S Q, LIU W C. A study on the process and mechanisms of laser machining of high-performance composites［J］. Acta Armamentarii, 1992, 13(4): 84-91.

[11] [11] GARCA A J, VILLAR M P, ARAU′JO D, et al. Carbon fiber reinforced polymers (CFRP) Nd: YAG laser machining［C］//International Congress on Applications of Lasers & Electro-Optics. San Francisco, California, USA: Laser Institute of America, 2004:(2104) https://doi.org/10.2351/1.5060257.

[12] [12] ABEDIN F, KALLA D K. Review on heat affected zone (HAZ) in laser machining［C］// Proceedings of the 6th Annual GRASP Symposium, Wichita: Wichita State University, 2010.

[13] [13] CHEN M S, JIANG H M, LIU Z J. Influence of tangential airflow on laser irradiating carbon-fiber composite［J］. Journal of National University of Defense Technology, 2011, 33(2): 23-27.

[14] [14] CHEN M S, JIANG H M. Influence of tangential airflows on process of laser ablating carbon-fiber composites［J］. Optics and Precision Engineering, 2011, 19(2): 482-486.

[15] [15] RIVEIRO A, QUINTERO F, LUSQUIOS F, et al. Laser cutting of carbon fiber composite materials［J］. Procedia Manufacturing, 2017, 13: 388-395.

[16] [16] FUCHS A N, SCHOEBERL M, TREMMER J, et al. Lasercutting of carbon fiber fabrics［J］. Physics Procedia, 2013, 41: 372-380.

[17] [17] KONONENKO T V, FREITAG C, KOMLENOK M S, et al. Oxygen-assisted multipass cutting of carbon fiber reinforced plastics with ultra-short laser pulses［J］. Journal of Applied Physics, 2014, 115(10):103107.

[18] [18] KONONENKO T V, FREITAG C, KOMLENOK M S, et al. Heat accumulation effects in short-pulse multi-pass cutting of carbon fiber reinforced plastics［J］. Journal of Applied Physics, 2015, 118(10): 103105.

[19] [19] ZHANG Y Q, ZHANG L, TAO Y H. Damage characterization of carbon fiber/epoxy composite under laser irradiation and tangential flow［J］. High Power Laser and Particle Beams, 2015, 27(7):071014.

[20] [20] YUKI H, SAKAI K, SHIZUKA H. The effect of fiber laser machining parameters on thermal-affected zone of carbon fiber reinforced plastic［J］. Advanced Materials Research, 2016, 1136: 377-383.

[21] [21] NEGARESTANI R, LI L, SEZER H K, et al. Nano-second pulsed DPSS Nd: YAG laser cutting of CFRP composites with mixed reactive and inert gases［J］. The International Journal of Advanced Manufacturing Technology, 2010, 49(5-8): 553-566.

[22] [22] HUA Y Q, XIAO T, XUE Q, et al. Experimental study about laser cutting of carbon fiber reinforced polymer［J］. Laser Technology, 2013, 37(5): 565-570.

[23] [23] ZHANG C, YUAN G F, CONG Q D, et al. Study of the water jet assisted laser cutting carbon fiber reinforced plastic (CFRP) composites［J］. Laser Journal, 2018, 39(2): 68-71.

[24] [24] TANGWARODOMNUKUN V, KHAMWISET K, QI H. Investigation into laser machining of carbon fiber reinforced plastic in a flowing water layer［J］. The International Journal of Advanced Manufacturing Technology, 2019, 104(9-12): 3629-3645.

[25] [25] SUN D, HAN F Z, YING W S, et al. Surface integrity of water jet guided laser machining of CFRP［J］. Procedia CIRP, 2018, 71: 71-74.

[26] [26] SUN D, HAN F Z, YING W S. The experimental investigation of water jet-guided laser cutting of CFRP［J］. The International Journal of Advanced Manufacturing Technology, 2019, 102(1-4): 719-729.

[27] [27] WANG J X, WU Y W, ZHANG G Y, et al. Experimental research of CFRP cutting by using water jet guided laser processing［J］. China Mechanical Engineering, 2021, 32(13): 1608-1616.