[1] [1] ZALEJSKAJONSSON A.Stated WTP and rational WTP：willingness to pay for green apartments in Sweden［J］.Sustainable Cities & Society, 2014(13)： 46-56.

[2] [2] TOYSERKANI E, KHAJEPOUR A, CORBIN S F.Laser cladding［J］.Proceedings of SPIE - The International Society for Optical Engineering, 2004, 11(2)：385-392.

[3] [3] ARIAS-GONZLEZ F, VAL J D, COMESAA R, et al.Fiber laser cladding of nickel-based alloy on cast iron［J］.Applied Surface Science, 2016(374)：197-205.

[4] [4] LIU S, ZHENG X, GENG G.Dry sliding wear behavior and corrosion resistance of NiCrBSi coating deposited by activated combustion-high velocity air fuel spray process［J］.Materials & Design, 2010, 31(2)：913-917.

[5] [5] MAO HUAIDONG.The study of controlling cracks in laser clad layer［D］.Tianjin： Tianjin University, 2007：49-50.

[6] [6] ZHANG J, YU H U, TAN X J, et al.Microstructure and high temperature tribological behavior of laser cladding Ni60A alloys coatings on 45 steel substrate［J］.Transactions of Nonferrous Metals Society of China, 2015, 25(5)：1525-1532.

[7] [7] ACKER K V, VANHOYWEGHEN D, PERSOONS R, et al.Influence of tungsten carbide particle size and distribution on the wear resistance of laser clad WC/Ni coatings［J］.Wear, 2005, 258(1)：194-202.

[8] [8] PAUL C P, ALEMOHAMMAD H, TOYSERKANI E, et al.Cladding of WC-12 Co on low carbon steel using a pulsed Nd：YAG laser［J］.Materials Science & Engineering A, 2007, 464(1)：170-176.

[9] [9] WANG D S, LIANG E J, CHAO M J, et al.Investigation on the microstructure and cracking susceptibility of laser-clad V2O5/NiCrBSiC alloy coatings［J］.Surface & Coatings Technology, 2008, 202(8)：1371-1378.

[10] [10] ZHOU S, ZENG X, HU Q, et al.Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization［J］.Applied Surface Science, 2008, 255(5)：1646-1653.

[11] [11] ZHAO X, LIN X, CHEN J, et al.The effect of hot isostatic pressing on crack healing, microstructure, mechanical properties of Rene88DT superalloy prepared by laser solid forming［J］.Materials Science & Engineering A, 2009, 504(1)：129-134.

[12] [12] HIDOUCI A, PELLETIER J M, DUCOIN F, et al.Microstructural and mechanical characteristics of laser coatings［J］.Surface & Coatings Technology, 2000, 123(1)： 17-23.

[13] [13] SONG W, ECHIGOYA J, ZHU B, et al.Effects of Co on the cracking susceptibility and the microstructure of Fe-Cr-Ni laser-clad layer［J］.Surface & Coatings Technology, 2001, 138(2)：291-295.

[14] [14] BEAL V E, ERASENTHIRAN P, HOPKINSON N, et al.Optimisation of processing parameters in laser fused H13/Cu materials using response surface method (RSM)［J］.Journal of Materials Processing Tech, 2006, 174(1)：145-154.

[15] [15] YU T, DENG Q L, ZHANG W, et al.Study on cracking mechanism of laser clad NiCrBSi coating［J］.Journal of Shanghai Jiaotong University, 2012, 46(7)：1043-1048.

[16] [16] GUAN ZHENZHONG.Laser processing manual［M］.Beijing：China Metrology Publishing House, 2007：263-265.

[17] [17] KADOLKAR P B, WATKINS T R, HOSSON J T M D, et al.State of residual stress in laser-deposited ceramic composite coatings on aluminum alloys［J］.Acta Materialia, 2007, 55(4)：1203-1214.

[18] [18] ZHOU S, ZENG X.Growth characteristics and mechanism of carbides precipitated in WC-Fe composite coatings by laser induction hybrid rapid cladding［J］.Journal of Alloys & Compounds, 2010, 505(2)：685-691.