[1] Zhang J, Lou L H. Directional solidification assisted by liquid metal cooling[J]. Journal of Material Science&Technology, 23, 289-300(2007).

[2] Luo Y, Pang S Y, Zhou J X et al. Numerical simulation of recast layer formation in nanosecond pulse laser drilling on nickel-based high-temperature alloy[J]. Chinese Journal of Lasers, 41, 0403007(2014).

[3] Shi Y, Yang X G, Yang D D et al. The study on the fatigue crack growth of nickel based directional solidification superalloys DZ125[J]. Journal of Mechanical Engineering, 55, 45-52(2019).

[4] Hou H P, Tian X J, Liu D et al. Microstructure and high-cycle fatigue properties of laser melting deposited TC11 titanium alloy repaired by tungsten argon arc welding[J]. Transactions of the China Welding Institution, 37, 9-12(2016).

[5] Hu B, Hu F Y, Guan R G et al. Hot corrosion behavior of cladding layer for repairing blade[J]. The Chinese Journal of Nonferrous Metals, 23, 2251-2258(2013).

[6] Han B, Chen X, Jiang M et al. Laser cladding high‑entropy alloy coating reinforced by carbon nanotubes and its corrosion resistance[J]. Chinese Journal of Lasers, 50, 2402205(2023).

[7] Li Y, Dang X F, Chen K et al. Effect of induction heating on the microstructure and mechanical property of laser additively repaired Ni-based superalloy DZ125L[J]. Journal of Mechanical Engineering, 57, 52-59(2021).

[8] Qi B L, Zhang A F, Zhang W L et al. Research on mechanical properties of DZ125L columnar crystal blade directionally repaired by laser direct forming[J]. Chinese Journal of Lasers, 42, 0603002(2015).

[9] Liu L L, Li S C, Dou W T et al. Process optimization and performance analysis for laser‑cladding Ni60 alloy coating on surface of 316L stainless steel[J]. Chinese Journal of Lasers, 51, 1602207(2024).

[10] Yao Z H, Qian H Y, Yu P J et al. Comparative study between powder feeding and wire feed-ing laser additive repairing of V-groove with Inconel 718 alloy[J]. Transactions of the China Welding Institution, 44, 71-78, 137(2023).

[11] Zhi X, Zhao J F, Cai J. Effect of process parameters on forming quality of fusion zone in laser cladding[J]. Laser & Optoelectronics Progress, 48, 101403(2011).

[12] Madadi F, Shamanian M, Ashrafizadeh F. Effect of pulse current on microstructure and wear resistance of Stellite6/tungsten carbide claddings produced by tungsten inert gas process[J]. Surface and Coatings Technology, 205, 4320-4328(2011).

[13] Li S P, Luo H L, Cao X et al. Microstructure and high-temperature fretting wear behavior of T800 alloy in casting and cladding state[J]. Rare Metal Materials and Engineering, 42, 603-606(2013).

[14] Zhang H Q, Liu H, Liu Y et al. Research status and analysis of co-based composite coatings prepared by laser cladding[J]. Laser & Optoelectronics Progress, 60, 0900004(2023).

[15] Yin Y, Kang P, Xiao M Z et al. Effect of heat treatment on microstructure and microhardness of CoCrW alloys processed by selective laser melting[J]. Chinese Journal of Lasers, 46, 1002002(2019).

[16] Bian H Y, Wang M N, Liu W J et al. Microstructure and properties of DZ125 alloy laser deposition of CoCrW coating[J]. Hot Working Technology, 121-127, 131(2024).

[17] Jiao Z G, Fu X, Fu J et al. Laser direct deposition of T800 cobalt-based alloy wear block microstructure and hardness study[J]. Laser & Optoelectronics Progress, 61, 2114013(2024).

[18] Xue H T, Tang Q, Yan C et al. Microstructure and properties of homogeneity and T800 surfacing layers of UMCo50 alloy[J]. Hot Working Technology, 49, 36-40(2020).

[19] He B, Chu S S, Zhang H Y et al. Laser forming properties of cobalt base superalloy[J]. Chinese Journal of Rare Metals, 41, 350-355(2017).