[1] [1] J. Crahay. Method and Apparatus for Forming Microcavities on the Surface of a Rolling Mill Roll［P］. US Partent: US4322600,1979

[2] [2] A. Bragrad, J. Crahay, W. Desmul. Texturing the roughness of work rolls by means of laser pulses: the process tomorrow ［C］. London: Advances in Cold Rolling Technology, 1985

[3] [3] K. Nishimura, N. Soeda, S. Ujihara. Development of high image clarity steel sheet by laser texturing［J］. Iron and Steel Engineer, 1991, 68(8): 46～56

[4] [4] Liu Jiangong. Analysis of the problems about steel product quality［J］. Steel Rolling, 1999, 16(6): 5～6

[5] [5] Yang Mingjiang, Chen Guangnan, Wu Jian et al.. A High Repetition Rate NdYAG Laser Texturing System with Multi-Pulse and Its Processing Methods［P］. China Patent: CN92113223.9,1992

[6] [6] Chen Guangnan, Yang Mingjiang, Wu Jian et al.. The Cold Rolling Work Rolls Used to Avoid Annealing Heat Treatment Bonding of Steel Sheet［P］. China Patent: CN93221266.2,1993

[7] [7] Chen Guangnan, Yang Mingjiang, Sun Chuanxiang et al.. The Cold Leveling Rolls Used to Improve the Performance of Steel Sheet［P］. China Patent: CN93221264.6,1993

[8] [8] Zuo Duluo, Li Shimin. Review on fast axial flow CO2 lasers［J］. Laser Technology, 2000, 24(1): 4～8

[9] [9] Chen Guangnan. Laser Texturing Roll Technology and Its Applications［R］. Institute of Mechanics, Chinese Academy of Siences, 1993.9

[10] [10] Luo Gengxing. The Organization and Its Physical Properties by Dispersed Pulse Laser Remelting［D］. Beijing: Institute of Mechanics,Chinese Academy of Siences, 1999

[11] [11] Shen Huan, Chen Guangnan, Li Guochen. The plastic instability behavior of laser textured steel sheet［J］. Mater. Sci. Engng. A, 1996, 219(1-2): 156～161

[12] [12] Chen Guangnan. Deformation Damage Tensile Instability and Limit Strains of Sheet Metals［D］. Beijing: Beijing University of Aeronaunics and Astronauties, 1991

[13] [13] Qian Kunqing, Chen Guangnan. Mechanism and application on optimizing material properties with dot laser processing［J］. Research of Metal Materials, 1999, 28(3): 1～20

[14] [14] Gao Hong, Chen Guangnan. Asymmetrical cold rolling realized on plain mill for steel sheet by laser textured rolls［J］. Iron and Steel, 1998, 33(3): 63～66

[15] [15] Zhu Huaiqing, Chen Guangnan, Nie Dejun et al.. A Surface Morphology and Patterns with a Special Cold-Rolled Steel Sheet［P］. China Patern: CN93221265.4, 1994

[16] [16] Chen Guangnan, Shen Huan, Zhu Huaiqing. Service properties of the laser-textured steel sheets［J］. Iron and Steel, 1996, 31(5): 13～16

[17] [17] R. S. Montgomwry. Laser Treatment of the Chrome-Plated Steel［R］. US AD A363854. 1980

[18] [18] Manz Herbert, Tuncer Haluk, Zaeper Manfred. Apparatus for Hardening the Inside Contour of a Gun Barrel with Laser Radiation［P］. US Patent: US6040551, 2000

[19] [19] Chen Guangnan, Wu Xiaolei, Luo Gengxing et al.. A Laser Enhanced Method and Device for Inner Surface of Tubular Workpieces［P］. China Patern: CN99116728.7, 1999

[20] [20] Chen Guangnan, Luo Gengxing, Zhang Kun et al.. A Method of Strengthening and Toughening on the Interface between Metal Substrate and Coating by Laser［P］. China Patern: ZL02149191.7,2002

[21] [21] Chen Guangnan, Luo Gengxing, Zhang Kun et al.. A laser method to improve the life of plated chrome barrel［J］. Acta Armanentar, 2003, 24(s1): 6～10

[22] [22] Li Huanxue, Chen Guangnan, Zhang Guoxiang et al.. Characteristics of the interface of a laser-quenched steel substrate and chromium electroplate［J］. Surface and Coatings Technology, 2006, 201(3-4): 902～907

[23] [23] Li Huaixue. Interfacial Structure and Adhesion Property of Cr Electroplate with Laser-Discrete Treated Steel Substrate［D］. Beijing: Institute of Mechanics, Chinese Academy of Sciences, 2007

[24] [24] Zhang Kun, Hu Ying, Chen Guangnan et al.. Performance of ablation resistance of plated chrome barrel［C］. Proceedings of the 5th Conference on Aerospace Equipment Failure Analysis, 2006. 395～399

[25] [25] Xu Xiangyang, Zhang Kun, Han Jianmin et al.. Metallographical sample prepared by ion beam etching［J］. Trans. Nonferrous Met. Soc. China, 2004, 14(s2): 282～285

[26] [26] Wu Chenwu. On the Mechanism of the Influence of the Laser As-Quenched Substrate on the Fracture of the Coating and Interface［D］. Beijing: Institute of Mechanics, Chinese Academy Sciences, 2007

[27] [27] Hu Ying, Zhang Kun, Chen Guangnan et al.. MATLAB used in analyzing the microcracks of Cr coating［J］. Heat Treatment of Metals, 2005, 30(suppl.): 161～163

[28] [28] Yang Banquan, Chen Guangnan, Zhang Kun et al.. A review on measurement methods for interfacial bonding strength between coating and substrate［J］. Advances in Mechanics, 2007, 37(1): 67～79

[29] [29] Zhang Kun, Su Jianyu, Zhang Guoxiang et al.. Spalling behavior of the coating interface while cross-sectional indentation［C］. Lanzhou: Proceedings of the 6th Conference on Surface Engineering, 2006. 65～67

[30] [30] Zhang Guoxiang, Zhang Kun, Chen Guangnan et al.. Cross-sectional indentation method to evaluate strong interface adhesive strength［J］. Surface Technology, 2006, 35(6): 1～4

[31] [31] Zhang Kailiang. Research of the Cross-Sectional Indentation Method to Evaluate Interfacial Properties of Coatings［D］. Beijing: Institute of Mechanics, Chinese Academy of Sciences, 2010

[32] [32] Yang Banquan. Mechanical Characterization of Strong Interface Coating System［D］. Beijing: Institute of Mechanics, Chinese Academy of Sciences, 2008

[33] [33] B. Q. Yang, K. Zhang, G. N. Chen et al.. Effect of a laser pre-quenched steel substrate surface on the crack driving force in a coating-steel substrate system［J］. Acta Materialia, 2007, 55(13): 4349～4358

[34] [34] R. Heaton, J. Champaigne, J. T. Cammett. A big lift for the aerospace industry［J］. Metal Finishing, 2005, 103(3): 18～24

[35] [35] Zeng Yuansong. Forming overall-panel of civil aircraft by shot-blasting technology［J］. Aeronautical Manufacturing Technology, 2008, (1): 54～55

[36] [36] Li Guoxiang. Pre-stressed and shot-blasting forming of airfoil overall-panel［J］. Aeronautical Manufacturing Engineering, 1998, (2): 16～18

[37] [37] Takafumi Adachi, Shirou Kimura, Takahiro Nagayama et al.. Age forming technology for aircraft wing skin［J］. Materials Forum, 2004, 28: 202～207

[38] [38] Zeng Yuansong, Huang Xia, Huang Shuo. The research situation and the developing tendency of creep age forming technology［J］. Journal of Plasticity Engineering, 2008, 15(3): 1～8

[39] [39] Li Ying, Ji Xiusheng. Heat age forming technology for overall-panel［J］. Liaoning Economy, 2007, (6): 54～55

[40] [40] Chen Guangnan, Wu Chenwu, Peng Qing et al.. A Forming-Hardening Technology Involves Laser-Assisted Pretress Forming and Shot Peening［P］. China Patent: CN101289733A, 2008

[41] [41] Chen Guangnan, Wang Xiufeng, Luo Gengxing et al.. A Method for Fine Adjustment of Formed Airplane Outer Shell［P］. China Patent: CN100429589C, 2007

[42] [42] Chen Guangnan, Wang Xiufeng, Luo Gengxing et al.. A Hybrid Forming Technique with Bending and Point Heat Source［P］. China Patent: CN100468244C, 2008

[43] [43] Chen Guangnan, Wang Xiufeng, Luo Gengxing et al.. A Hybrid Forming Technique with Bending and Laser Radiation［P］. China Patent: CN100552575C,2008

[44] [44] Chen Guangnan, Luo Gengxing, Wang Xiufeng et al.. A Combined Digital Forming Technology for Integral Panel Based on Bending and Moving Heating Source［P］. China Patent: CN100487612C, 2008

[45] [45] Peng Qing, Chen Guangnan, Wang Xiufeng. Similarity criterion of laser-assisted pre-stress forming［J］. Chinese J. Lasers, 2009, 36(5): 1261～1266

[46] [46] Peng Qing, Chen Guangnan, Wu Chenwu et al.. Laser-assisted pre-stress forming for integral panels［J］. Acta Aeronautica et Astronautica Sinica, 2009, 30(8): 1544～1547