[1] Shindell D, Faluvegi G, Walsh M et al. Climate, health, agricultural and economic impacts of tighter vehicle-emission standards[J]. Nature Climate Change, 1, 59-66(2011).

[2] Kim H J, McMillan C, Keoleian G A et al. Greenhouse gas emissions payback for lightweighted vehicles using aluminum and high-strength steel[J]. Journal of Industrial Ecology, 14, 929-946(2010).

[3] Li M, Rong Y M, Wang L et al. Study on microstructure and mechanical properties of laser welded joints for ultra-high strength steel 1700MS[J]. Laser & Optoelectronics Progress, 60, 1714004(2023).

[4] Zheng K K, Lin Y X, Lai T Z et al. Replacing copper in composites with waste foundry sand: a novel approach for Cu-free resin-based braking material[J]. Tribology International, 191, 109110(2024).

[5] Longo M, Yaïci W, Foiadelli F. Electric vehicles charged with residential’s roof solar photovoltaic system: a case study in Ottawa[C], 121-125(2017).

[7] Lang L H, Yang X Y, Liu K N et al. Automotive lightweight forming technology and its progress[J]. Modern Components, 45-47(2014).

[8] Taylor T, Clough A. Critical review of automotive hot-stamped sheet steel from an industrial perspective[J]. Materials Science and Technology, 34, 809-861(2018).

[9] Zhang W, Xu J. Advanced lightweight materials for automobiles: a review[J]. Materials & Design, 221, 110994(2022).

[10] Tucker R. Trends in automotive lightweighting[J]. Metal Finishing, 111, 23-25(2013).

[11] Xu W, Zhang X Z, Tao W et al. Microstructure and properties of welded joints of oscillating laser filler wire welded Al-Si coated steel[J]. Chinese Journal of Lasers, 50, 1602106(2023).

[12] van Ratingen M, Williams A, Lie A et al. The European new car assessment programme: a historical review[J]. Chinese Journal of Traumatology, 19, 63-69(2016).

[13] Lin H T. Study on microstructure, properties and hydrogen embrittlement sensitivity of welded joints of high strength steel QP980[D](2020).

[14] Lindberg H. Advanced high strength steel technologies in the 2016 Volvo XC90[Z]. Great Designs in Steel(2016).

[15] Khan M S, Razmpoosh M H, Biro E et al. A review on the laser welding of coated 22MnB5 press-hardened steel and its impact on the production of tailor-welded blanks[J]. Science and Technology of Welding and Joining, 25, 447-467(2020).

[16] Merklein M, Wieland M, Lechner M et al. Hot stamping of boron steel sheets with tailored properties: a review[J]. Journal of Materials Processing Technology, 228, 11-24(2016).

[17] Razmpoosh M H, Macwan A, Biro E et al. Microstructure and dynamic tensile characteristics of dissimilar fiber laser welded advanced high strength steels[J]. Materials Science and Engineering: A, 773, 138729(2020).

[18] Jia J, Yang S L, Ni W Y et al. Microstructure and properties of fiber laser welded joints of ultrahigh-strength steel 22MnB5 and its dissimilar combination with Q235 steel[J]. ISIJ International, 54, 2881-2889(2014).

[19] Steinhoff K. From spades to functionally graded automotive components, compact training on hot stamping technology[C], 7-32(2014).

[20] Norrbottens J A B. Manufacturing a hardened steel article[P].

[21] Hu P, Ying L, Dai M H et al[M]. Hot stamping advanced manufacturing technology(2018).

[22] Ma N, Hu P, Guo W. Experiments and analysis of relations among heat, stress and transformation of boron steel for hot forming[J]. Transactions of Materials and Heat Treatment, 31, 33-36, 41(2010).

[23] Lin W H. Study on microstructure characteristics and aluminum migration during laser welding Al-Si coated 22MnB5[D](2020).

[24] Wang C. Investigation on thermal contact behavior and prediction of mechanical properties and process optimization in hot-stamping[D](2014).

[25] Wang H. Study on microstructures and mechanical properties of Al-Si coating 22MnB5 laser welded joints[D](2020).

[26] Jandeska W F, Morral J E. The distribution of boron in austenite[J]. Metallurgical Transactions, 3, 2933-2937(1972).

[27] Mortimer D A, Nicholas M G. Surface and grain-boundary energies of AISI 316 stainless steel in the presence of boron[J]. Metal Science, 10, 326-332(1976).

[28] He X L, Chu Y Y, Jonas J J. Grain boundary segregation of boron during continuous cooling[J]. Acta Metallurgica, 37, 147-161(1989).

[29] Zhang Z, Farrar R A. Influence of Mn and Ni on the microstructure and toughness of C-Mn-Ni weld metals[J]. Welding Journal, 76, 183-196(1997).

[30] Karbasian H, Tekkaya A E. A review on hot stamping[J]. Journal of Materials Processing Technology, 210, 2103-2118(2010).

[31] Jiang C, Shan Z D, Zhuang B L et al. Microstructure and properties of hot stamping 22MnB5 steel[J]. Transactions of Materials and Heat Treatment, 33, 78-81(2012).

[32] Zhang S, Yang D B. Study on microstructure and properties of hot stamping high strength steel sheet for automobile[J]. Hot Working Technology, 48, 145-147(2019).

[33] Erhardt R, Böke J. Industrial application of hot forming press simulation[C](2008).

[34] Zheng K K, Lin Y X, Cai J G et al. Corrosion resistance and tribological properties of laser cladding layer of H13 die steel strengthened by ultrasonic rolling[J]. Chinese Journal of Mechanical Engineering, 35, 137(2022).

[35] Chen X G. Study on laser welding and nanosecond laser ablation of Al-Si coating hot stamping steel[D](2017).

[36] Li S Y. Study on microstructures and properties of welded seams in tailor welded blanks of Al-Si coated hot stamped steel[D](2020).

[37] Yi H L, Zhou S, Xiong X C. Coated steel plate with thin aluminum alloy coating and its coating method[P].

[38] Fan D W, de Cooman B C. State-of-the-knowledge on coating systems for hot stamped parts[J]. Steel Research International, 83, 412-433(2012).

[39] Dosdat L, Petitjean J, Vietoris T et al. Corrosion resistance of different metallic coatings on press-hardened steels for automotive[J]. Steel Research International, 82, 726-733(2011).

[40] Fan D W, de Cooman B C. Formation of an aluminide coating on hot stamped steel[J]. ISIJ International, 50, 1713-1718(2010).

[41] Fan D W, Kim H S, Oh J K et al. Coating degradation in hot press forming[J]. ISIJ International, 50, 561-568(2010).

[42] Jenner F, Walter M E, Iyengar R M et al. Evolution of phases, microstructure, and surface roughness during heat treatment of aluminized low carbon steel[J]. Metallurgical and Materials Transactions A, 41, 1554-1563(2010).

[43] Autengruber R, Luckeneder G, Kolnberger S et al. Surface and coating analysis of press-hardened hot-dip galvanized steel sheet[J]. Steel Research International, 83, 1005-1011(2012).

[44] Kondratiuk J, Kuhn P, Labrenz E et al. Zinc coatings for hot sheet metal forming: comparison of phase evolution and microstructure during heat treatment[J]. Surface and Coatings Technology, 205, 4141-4153(2011).

[45] Kim Y G, Kim I J, Kim J S et al. Evaluation of surface crack in resistance spot welds of Zn-coated steel[J]. Materials Transactions, 55, 171-175(2014).

[46] Roudabush L A. Zinc-nickel alloy coatings: a technical review of published literature[R](1990).

[47] Wang Y, Shu L S, Geng S N et al. Status and development trend of laser welding technology for automotive body[J]. Chinese Journal of Lasers, 49, 1202004(2022).

[48] Zhang Y L, Zhong Z R, Cao J et al. Artificial intelligence empowered laser: research progress of intelligent laser manufacturing equipment and technology[J]. Chinese Journal of Lasers, 50, 1101005(2023).

[49] Hong K M, Shin Y C. Prospects of laser welding technology in the automotive industry: a review[J]. Journal of Materials Processing Technology, 245, 46-69(2017).

[50] Wang J F, Yuan Y, Li C. Microstructures and mechanical properties of laser tailor-welded dissimilar super-high strength steel sheets[J]. Iron & Steel, 57, 138-147(2022).

[51] Jia Q, Guo W, Wan Z D et al. Microstructure and mechanical properties of laser welded dissimilar joints between QP and boron alloyed martensitic steels[J]. Journal of Materials Processing Technology, 259, 58-67(2018).

[52] Razmpoosh M H, Khan M S, Kalashami A G et al. Effects of laser beam defocusing on high-strain-rate tensile behavior of press-hardened Zn-coated 22MnB5 steel welds[J]. Optics & Laser Technology, 141, 107116(2021).

[53] Chen C, Zhou H P, Wang C J et al. Laser welding of ultra-high strength steel with different oscillating modes[J]. Journal of Manufacturing Processes, 68, 761-769(2021).

[54] Li J Z, Sun Q J, Liu Y B et al. Melt flow and microstructural characteristics in beam oscillation superimposed laser welding of 304 stainless steel[J]. Journal of Manufacturing Processes, 50, 629-637(2020).

[55] Yan G R L. Effects of laser oscillation on the mechanical property and microstructure of the steel/aluminum alloy dissimilar metals welding joint[D](2021).

[56] Li S C, Xu W, Wu Q P. Effect of filler wire on laser welding process[J]. Laser & Optoelectronics Progress, 54, 120005(2017).

[57] Guo Z W, Han Y. Study on process stability and microstructure properties of low alloy high strength steel by laser wire filler welding[J]. Applied Laser, 42, 7-13(2022).

[58] Fang R C, Zhang J, Zeng J H et al. Narrow gap wobble laser with filling wire for welding of 35 steel and Q355B steel[J]. Chinese Journal of Lasers, 49, 1602014(2022).

[59] Meng Y F, Wang W X, Li C et al. Research on fiber laser welding of 304 stainless steel with filler wire[J]. Applied Laser, 36, 535-542(2016).

[60] Cheng Q, Guo N, Zhang D et al. Study on interface and mechanical property of laser welding of NiTi shape memory alloy and 2A12 aluminum alloy joint with a TC4 wire[J]. Smart Material Structures, 31, 015032(2022).

[61] Chen N N, Wan Z X, Wang H P et al. Effect of AlSi coating on laser spot welding of press hardened steel and process improvement with annular stirring[J]. Materials & Design, 195, 108986(2020).

[62] Martín D S, Palizdar Y, García-Mateo C et al. Influence of aluminum alloying and heating rate on austenite formation in low carbon-manganese steels[J]. Metallurgical and Materials Transactions A, 42, 2591-2608(2011).

[63] Sun Q, Di H S, Wang X N et al. Suppression of δ-ferrite formation on Al-Si coated press-hardened steel during laser welding[J]. Materials Letters, 245, 106-109(2019).

[64] Yoon T J, Oh M H, Shin H J et al. Comparison of microstructure and phase transformation of laser-welded joints in Al-10wt%Si-coated boron steel before and after hot stamping[J]. Materials Characterization, 128, 195-202(2017).

[65] Chen X M, Wang X N, Sun Q et al. Effect of Al-Si coating on microstructure and properties of 22MnB5 steel laser welded joint[J]. Journal of Mechanical Engineering, 54, 162-167(2018).

[66] Saha D C, Biro E, Gerlich A P et al. Fusion zone microstructure evolution of fiber laser welded press-hardened steels[J]. Scripta Materialia, 121, 18-22(2016).

[67] Yang H W, Sun Y M, Tan C W et al. Influence of Al-Si coating on microstructure and mechanical properties of fiber laser welded and then press-hardened 22MnB5 steel[J]. Materials Science and Engineering: A, 794, 139918(2020).

[68] Saha D C, Biro E, Gerlich A P et al. Fiber laser welding of Al-Si-coated press-hardened steel[J]. Welding Journal, 95, 147-156(2016).

[69] Zhang F, Li F, Hua X M et al. Research of effects with Al-Si coating on distribution and performance of tailored laser[J]. Chinese Journal of Lasers, 42, 0503005(2015).

[70] Lee C W, Kim S Y, Jang S G et al. Fusion zone microstructural evolution of Al-10% Si coated hot stamping steel during laser welding[J]. ISIJ International, 59, 136-143(2019).

[71] Lin W H, Li F, Wu D S et al. Effect of Al-Si coating on weld microstructure and properties of 22MnB5 steel joints for hot stamping[J]. Journal of Materials Engineering and Performance, 27, 1825-1836(2018).

[72] Sun Y M, Wu L J, Tan C W et al. Influence of Al-Si coating on microstructure and mechanical properties of fiber laser welded 22MnB5 steel[J]. Optics & Laser Technology, 116, 117-127(2019).

[73] Kanuerg J F, Pike A, Verrier P et al. Method for manufacturing welded components with good mechanical properties from rolled coated plates[P].

[74] Vierstraete R, Ethling W, Pinard F et al. Laser ablation for hardening laser welded steel blanks[J]. Industrial Laser Solutions, 25, 6-11(2010).

[75] Messaoudi H, Mehrafsun S, Tromenschläger W. Picosecond laser cleaning of hot stamped 22MnB5 steel[J]. Journal of Materials Science and Surface Engineering, 5, 504-508(2017).

[76] Xu W, Yang S L, Tao W et al. Effect of Al-Si coating removal state on microstructure and mechanical properties of laser welded 22MnB5 steel[J]. Journal of Materials Engineering and Performance, 32, 4205-4215(2023).

[77] He X, Qin Y Q, Jiang W X. Effect of welding parameters on microstructure and mechanical properties of laser welded Al-Si coated 22MnB5 hot stamping steel[J]. Journal of Materials Processing Technology, 270, 285-292(2019).

[78] Kang M, Kim Y M, Kim C. Effect of heating parameters on laser welded tailored blanks of hot press forming steel[J]. Journal of Materials Processing Technology, 228, 137-144(2016).

[79] Sun Q, Di H S, Wang X N et al. A study on microstructure and properties of PHS fiber laser welded joints obtained in air atmospheres[J]. Materials, 11, 1135(2018).

[80] Gerhards B, Engels O, Olschok S et al. Modified laser beam welding of aluminum-silicon coated 22MnB5[J]. Materialwissenschaft Und Werkstofftechnik, 50, 115-125(2019).

[81] Sun J, Han Z Y, Xu F et al. The segregation control of coating element for pulse fiber laser welding of Al-Si coated 22MnB5 steel[J]. Journal of Materials Processing Technology, 286, 116833(2020).

[82] Xu W, Tao W, Luo H W et al. Effect of oscillation frequency on the mechanical properties and failure behaviors of laser beam welded 22MnB5 weld[J]. Journal of Materials Research and Technology, 22, 1436-1448(2023).

[83] Kang M, Kim C, Bae S M. Laser tailor-welded blanks for hot-press-forming steel with arc pretreatment[J]. International Journal of Automotive Technology, 16, 279-283(2015).

[84] Wang X N, Zhang Z H, Hu Z R et al. Effect of Ni foil thickness on the microstructure of fusion zone during PHS laser welding[J]. Optics & Laser Technology, 125, 106014(2020).

[85] Chen X M, Wang X N, Sun Q et al. Improving the mechanical properties of PHS laser welded joints by adding Ni foil to suppress δ-ferrite[J]. Journal of Materials Research and Technology, 9, 5184-5193(2020).

[86] Khan M S, Society A W, Biro E et al. α-ferrite suppression during fiber laser welding of Al-Si coated 22MnB5 press-hardened steel[J]. Welding Journal, 100, 213-220(2021).

[87] Khan M S, Razmpoosh M H, Macwan A et al. Optimizing weld morphology and mechanical properties of laser welded Al-Si coated 22MnB5 by surface application of colloidal graphite[J]. Journal of Materials Processing Technology, 293, 117093(2021).

[88] Lin W H, Li F, Hua X M et al. Effect of filler wire on laser welded blanks of Al-Si-coated 22MnB5 steel[J]. Journal of Materials Processing Technology, 259, 195-205(2018).

[89] Xu W, Jiang Z G, Zhang J Z et al. Direct laser-filler wire welding of Al-Si coated 22MnB5 steel without removing the Al-Si coating[J]. Journal of Materials Research and Technology, 24, 2265-2278(2023).

[90] Xu W, Yang S L, Tao W. A welding material and laser welding method for laser welding of coated steel plates[P].

[91] Tao W, Yang S L, Xu W et al[P]. A high-strength steel laser welding filler, joint and method.