[1] Li M, Zhang W, Hua X M et al. Investigation of plasma and metal transfer dynamic behavior during fiber laser GMAW-P hybrid welding[J]. Chinese Journal of Lasers, 44, 0402008(2017).

[2] Ren Y, Wu Q, Zou J L et al. Real-time monitoring of coaxial protection fiber laser welding of austenitic stainless steels[J]. Chinese Journal of Lasers, 44, 0502003(2017).

[3] Luo Y, Tang X H, Lu F G et al. Effect of subatmospheric pressure on plasma plume in fiber laser welding[J]. Journal of Materials Processing Technology, 215, 219-224(2015). http://www.sciencedirect.com/science/article/pii/S0924013614003112

[4] Gao M, Chen C, Hu M et al. Characteristics of plasma plume in fiber laser welding of aluminum alloy[J]. Applied Surface Science, 326, 181-186(2015).

[5] Gen Y C, Fei C, Cong Z et al. Welding defect suppression of stainless steel thick plate joint by 10-kW level laser welding[J]. Applied Laser, 38, 207-214(2018).

[6] Wang L D, Li M, Zou J L et al. Multiple imaging characteristics of plasma in laser-tungsten inert gas arc hybrid welding[J]. Chinese Journal of Lasers, 46, 0302008(2019).

[7] Cui H C, Lu F G, Tang X H et al. Experimental research on fluidity of laser welded molten pool[J]. Chinese Journal of Lasers, 38, 0603004(2011).

[8] Xia S Q, He J J, Wang W et al. Simulation of three-dimensional transient behavior of molten pool in laser deep penetration welding[J]. Chinese Journal of Lasers, 43, 1102004(2016).

[9] Kim J, Oh S, Ki H. A study of keyhole geometry in laser welding of zinc-coated and uncoated steels using a coaxial observation method[J]. Journal of Materials Processing Technology, 225, 451-462(2015).

[10] Ha N. Experimental study on characterisation behavior of keyhole during high power fiber laser deep penetration welding[D]. Beijing: Beijing University of Technology(2018).

[11] Kawahito Y, Mizutani M, Katayama S. Elucidation of high-power fibre laser welding phenomena of stainless steel and effect of factors on weld geometry[J]. Journal of Physics D, 40, 5854-5859(2007).

[12] Zhou M L. Study on temperature field of molten pool in laser welding of low carbon steel[D]. Changchun: Changchun University of Science and Technology(2014).

[13] Wang H Z, Zou Y. Microscale interaction between laser and metal powder in powder-bed additive manufacturing: conduction mode versus keyhole mode[J]. International Journal of Heat and Mass Transfer, 142, 118473(2019). http://www.researchgate.net/publication/334898868_Microscale_interaction_between_laser_and_metal_powder_in_powder-bed_additive_manufacturing_Conduction_mode_versus_keyhole_mode

[14] Luo M, Shin Y C. Vision-based weld pool boundary extraction and width measurement during keyhole fiber laser welding[J]. Optics and Lasers in Engineering, 64, 59-70(2015).

[15] Zhang Y. Simulation of keyhole effect in laser deep penetration welding based on “sandwich” new method[D]. Changsha: Hunan University(2005).

[16] He S, Chen H, Cai C et al. Influence of He-Ar mixed shielding gas on laser-MIG hybrid welding characteristic of aluminum alloys[J]. Chinese Journal of Lasers, 45, 1202005(2018).

[17] Zou J L, Ha N, Xiao R S et al. Interaction between the laser beam and keyhole wall during high power fiber laser keyhole welding[J]. Optics Express, 25, 17650-17656(2017).

[18] Matsunawa A, Semak V. The simulation of front keyhole wall dynamics during laser welding[J]. Journal of Physics D, 30, 798-809(1997).

[19] Chen X, Pang S Y, Chen W D et al. C]∥The 18th National Welding Academic Conference of Welding Society of China Mechanical Engineering Society. [S.l.:s.n.](2013).

[20] Zhao L, Han X, Zou J L et al. Experimental study on formation process of keyhole during fiber laser deep penetration welding[J]. Laser & Optoelectronics Progress, 59, 071402(2020).