[1] [1] Lightweighting Material[R]. 2010 Annual Progress Report.

[2] [2] World Auto Steel. Advanced High Strength Steel (AHSS)—Application Guidelines (Version4)[M]. 2009. 1-1-1-6.

[3] [3] Liu Chao, Wang Lei, Liu Yang. Development of advanced high-strength steel used for automobile and its application in body design[J]. Special Steel Techonlogy, 2012, 18(2): 1-4,9.

[4] [4] D Parkes, W Xu, D Westerbaan, et al.. Microstructure and fatigue properties of fiber laser welded dissimilar joints between high strength low alloy and dual-phase steels[J]. Materials and Design, 2013, 51: 665-675.

[5] [5] S K Panda, V H Baltazar Hernandez, M L Kuntz, et al.. Formability analysis of diode-laser-welded tailored blanks of advanced high-strength steel sheets[J]. Metallurgical and Materials Transactions A, 2009, 40A(8): 1955-1967.

[6] [6] Mingsheng Xia, Elliot Biro, Zhiling Tian, et al.. Effects of heat input and martensite on HAZ softening in laser welding of dual phase steels[J]. ISIJ International, 2008, 48(6): 809-814.

[7] [7] M Pouranvari, S P H Marashi, D S Safanama. Failure mode transition in AHSS resistance spot welds. part II: experimental investigation and model validation[J]. Materials Science and Engineering A, 2011, 528(8): 8344-8352.

[8] [8] N Farabi, D L Chen, J Lib, et al.. Microstructure and mechanical properties of laser welded DP600 steel joints[J]. Materials Science and Engineering A, 2010, 527(9): 1215-1222.

[9] [9] Sylvain Dancette, Veronique Massardier-Jourdan, Damien Fabrègue, et al.. HAZ microstructures and local mechanical properties of high strength steels resistance spot welds[J]. ISIJ International, 2011, 51(1): 99-107.

[10] [10] Fatih Hayat, Brahim Sevim. The effect of welding parameters on fracture toughness of resistance spot-welded galvanized DP600 automotive steel sheets[J]. Int J Adv Manuf Technol,2012, 58(9): 1043-1050.

[11] [11] N Farabi, D L Chen, Y Zhou. Tensile properties and work hardening behavior of laser-welded dual-phase steel joints[J]. Journal of Materials Engineering and Performance, 2012, 21(2): 222-230.

[12] [12] W Xu, D Westerbaan, S S Nayak, et al.. Tensile and fatigue properties of fiber laser welded high strength low alloy and DP980 dual-phase steel joints[J]. Materials and Design, 2013, 43(7): 373-383.

[13] [13] V H Baltazar Hernandez, Sushanta Kumar Panda, Yasuaki Okita, et al.. A study on heat affected zone softening in resistance spot welded dual phase steel by nanoindentation[J]. J Mater Sci, 2010, 45(6): 1638-1647.

[14] [14] S S Nayak, V H Baltazar Hernandez, Y Zhou. Effect of chemistry on nonisothermal tempering and softening of dual-phase steels[J]. Metallurgical and Materials Transactions A, 2011, 42(11): 3242-3248.

[15] [15] E Biro, J R Mcdermid, J D Embury, et al.. Softening kinetics in the subcritical heat-affected zone of dual-phase steel welds[J]. Metallurgical and Materials Transactions A, 2010, 41(9): 2348-2356.

[16] [16] V H Baltazar Hernandez, S S Nayak, Y Zhou. Tempering of martensite in dual-phase steels and its effects n softening behavior[J]. Metallurgical and Materials Transactions A, 2011, 42(10): 3115-3129.

[17] [17] Zhao Lin, Tsukamoto Susumu, Arakane Goro, et al.. Influence of welding parameters on weld depth and porosity in high power fiber laser welding[J]. Chinese J Lasers, 2013, 40(11): 1103004.

[18] [18] Wu Dongjiang, Zhang Tianwu, Ma Guangyi. Influence of welding parameters on the morphology of Fe-Ni alloy with continuous wave YAG laser[J]. China J Lasers, 2013, 40(3): 0303003.

[19] [19] Dong Danyang, Wang Guanjun, Ma Min, et al.. Study on microstructure and properties of laser welding dual phase steel joints for an auto-body[J]. Chinese J Lasers, 2012, 32(9): 0903002.

[20] [20] Zhang Yi, Tan Lipeng, Zhang Chenglei. Research on gap margin in laser butt welding of high-strength automobile steel with hot wire filler[J]. Chinese J Lasers, 2013, 40(7): 0703003.

[21] [21] Jao-Hwa Kuang, Tsung-Pin Hung, Chih-Kuan Chen. A keyhole volumetric model for weld pool analysis in NdYAG pulsed laser welding[J]. Optics & Laser Technology, 2012, 44(5): 1521-1528.