[1] Yang D X. Study on the wear-resistance of 42CrMo alloy steel and its wear resisting property by carbonitriding surface[D]. Fuxin: Liaoning Technical University(2017).

[2] Ding Y H, You G Q, Wen H Y et al. Microstructure and mechanical properties of inertia friction welded joints between alloy steel 42CrMo and cast Ni-based superalloy K418[J]. Journal of Alloys and Compounds, 803, 176-184(2019).

[3] Liu Y C. Research on cutting force and cutting temperature in high speed milling of 42CrMo high strength steel[D]. Hengyang: University of South China(2015).

[4] Cao J, Lu H F, Lu J Z et al. Effects of tungsten carbide particles on microstructure and wear resistance of hot-working die prepared via laser cladding[J]. Chinese Journal of Lasers, 46, 0702001(2019).

[5] Gu D D, Meiners W. Microstructure characteristics and formation mechanisms of in situ WC cemented carbide based hardmetals prepared by selective laser melting[J]. Materials Science and Engineering A, 527, 7585-7592(2010). http://www.sciencedirect.com/science/article/pii/S092150931000986X

[6] Wu P, Jiang E Y, Zhao C et al. Influence of laser cladding parameters on microstructure and wear-resistance of Ni-based alloy coatings[J]. Transactions of the China Welding Institution, 24, 44-46, 50(2003).

[7] Ma Q S, Li Y J, Wang J et al. Investigation on cored-eutectic structure in Ni60/WC composite coatings fabricated by wide-band laser cladding[J]. Journal of Alloys and Compounds, 645, 151-157(2015).

[8] Zhao W, Zhang K, Liu P et al. Study on microstructure and properties of laser cladding Ni-based WC composite coating[J]. Journal of Functional Materials, 50, 1098-1103, 1109(2019).

[9] Jiang J B, Cheng Y, Huang X et al. Performance of WC reinforced Ni-based coating on 45 steel surface by laser cladding[J]. Applied Laser, 39, 24-34(2019).

[10] Li C G, Zhang Q S, Wang F F et al. Microstructure and wear behaviors of WC-Ni coatings fabricated by laser cladding under high frequency micro-vibration[J]. Applied Surface Science, 485, 513-519(2019). http://www.sciencedirect.com/science/article/pii/S0169433219312632

[11] Li F Q, Feng X Y, Chen Y B. Influence of WC content on microstructure of WC/Ni60A laser cladding layer[J]. Chinese Journal of Lasers, 43, 0403009(2016).

[12] Weng Z K, Wang A H, Wu X H et al. Wear resistance of diode laser-clad Ni/WC composite coatings at different temperatures[J]. Surface and Coatings Technology, 304, 283-292(2016).

[13] Sui Y, Liu X Y, Sun X H[J]. The role and introduction method of ceramic phase nanomaterials in laser cladding materials Rare Earth Information, 2018, 34-35.

[14] Xu L. Laser cladding mechanism and experimental study of boron-doped nano-silicon slurry[D]. Nanjing: Nanjing University of Aeronautics and Astronautics(2019).

[15] Chai L S, Wang C S, Han L Y et al. Influence of nano-TiC/C content on microstructure and properties of laser clad Ni-based alloy coatings[J]. Chinese Journal of Lasers, 41, 1203003(2014).

[16] Farahmand P, Liu S, Zhang Z et al. Laser cladding assisted by induction heating of Ni-WC composite enhanced by nano-WC and La2O3[J]. Ceramics International, 40, 15421-15438(2014).

[17] Benea L, Başa S B, Dǎnǎilǎ E et al. Fretting and wear behaviors of Ni/nano-WC composite coatings in dry and wet conditions[J]. Materials & Design, 65, 550-558(2015).

[18] Weibull W. A statistical distribution function of wide applicability[J]. Journal of Applied Mechanics, 18, 293-297(1951).

[19] Liu Z, Wu Q, Lin J X et al. Research on laser surface cladding of 2205 steel with Ni-based and WC powders[J]. Materials Reports, 30, 535-538(2016).

[20] Liu S Q, Huang J L, Tian B H et al. Microstructure and heat-corrosion resistance of laser cladding layer of Ni-base alloys[J]. Hot Working Technology, 37, 99-101(2008).

[21] Yuan Y L, Li Z G. Precipitation of M6C particle in the Ni60A+WC reinforced Fe-based graded coating[J]. Rare Metal Materials and Engineering, 42, 483-486(2013).

[22] Morra M M, Ballinger R G, Hwang I S. INCOLOY 908, a low coefficient of expansion alloy for high-strength cryogenic applications: Part I. Physical metallurgy[J]. Metallurgical Transactions A, 23, 3177-3192(1992).

[23] Yong Y W, Fu W, Zhang X et al. In-situ synthesis of WC/TaC reinforced nickel-based composite alloy coating by laser cladding[J]. Rare Metal Materials and Engineering, 46, 3176-3181(2017).

[24] Ortiz A, García A, Cadenas M et al. WC particles distribution model in the cross-section of laser cladded NiCrBSi + WC coatings, for different wt% WC[J]. Surface and Coatings Technology, 324, 298-306(2017).