<trans-title xml:lang="en">Effect of Heat Treatment on Composition, Microstructure and Mechanical Property of Domestic KD-SA SiC Fibers</trans-title>

Shuang WU; Yanzi GOU; Yongshou WANG; Quzhi SONG; Qingyu ZHANG; Yingde WANG

doi:10.15541/jim20220548

Journal of Inorganic Materials, Volume. 38, Issue 5, 569(2023)

Effect of Heat Treatment on Composition, Microstructure and Mechanical Property of Domestic KD-SA SiC Fibers

Shuang WU, Yanzi GOU^*, Yongshou WANG, Quzhi SONG, Qingyu ZHANG, and Yingde WANG^*

Science and Technology on Advanced Ceramic Fibers and Composites Laboratory, College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China

show less

Abstract Get PDF(in Chinese)

References(19)

[1] AN Q L, CHEN J, MING W W et al. Machining of SiC ceramic matrix composites: a review[J]. Chinese Journal of Aeronautic, 540(2021).

[2] YUAN Q, SONG Y C. Research and development of continuous SiC fibers and SiC_f/SiC composities[J]. Journal of Inorganic Materials, 1157(2016).

[3] WANG P, WANG Q L, ZHANG X Y et al. Oxidation behavior of SiC_f/SiC composites modified by layered-Y₂Si₂O₇ in wet oxygen environment[J]. Journal of Inorganic Materials, 904(2019).

[4] LÜ X X, JIANG Z Y, ZHOU Y R et al. Effect of BN/SiC multilayered interphases on mechanical properties of SiC Fibers and minicomposites by PIP.[J]. Journal of Inorganic Materials, 1099(2020).

[6] WANG P, LIU F Q, WANG H et al. A review of third generation SiC fibers and SiC_f/SiC composites[J]. Journal of Materials Science and Technology, 2743(2019).

[7] BUNSELL A R, PIANT A. A review of the development of three generations of small diameter silicon carbide fibres[J]. Journal of Materials Science, 823(2006).

[8] INCHIKAWA H. Polymer-derived ceramic fibers[J]. Annual Review of Materials Research, 335(2016).

[9] SHA J J, HINOKI T, KOHYAMA A. Microstructural characterization and fracture properties of SiC-based fibers annealed at elevated temperatures[J]. Journal of Materials Science, 5046(2007).

[10] SHA J J, NOZAWA T, PARK J S et al. Effect of heat treatment on the tensile strength and creep resistance of advanced SiC fibers[J]. Journal of Nuclear Materials, 592(2004).

[11] ISHIKAWA T, KOHTOKU Y, KUMAGAWA K et al. High-strength alkali-resistant sintered SiC fibre stable to 2200 ℃[J]. Nature, 773(1998).

[12] HUGUST-GARCIA J, JANKOWIAK A, MIRO S et al. Ion irradiation effects on third generation SiC fibers in elastic and inelastic energy loss regimes[J]. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 93(2014).

[13] GOU Y Z, JIAN K, WANG H et al. Fabrication of nearly stoichiometric polycrystalline SiC fibers with excellent high- temperature stability up to 1900 ℃[J]. Journal of the American Ceramic Society, 2050(2018).

[15] CAO S Y, WANG J, WANG H. Effect of heat treatment on the microstructure and tensile strength of KD-II SiC fibers[J]. Materials Science and Engineering A, 55(2016).

[16] WANG P R, GOU Y Z, WANG H et al. Revealing the formation mechanism of the skin-core structure in nearly stoichiometric polycrystalline SiC fibers[J]. Journal of the European Ceramic Society, 2295(2020).

[17] ZHANG Y, WU C L, WANG Y D et al. A detailed study of the microstructure and thermal stability of typical SiC fibers[J]. Materials Characterization, 91(2018).

[18] USUKAWA R, ISHIKAWA T. Effect of Al contained in polymer- derived SiC crystals on creating stable crystal grain boundaries[J]. International Journal of Applied Ceramic Technology, 6(2021).

[19] WEIBULL W, STOCKHOLM, SWEDEN. A statistical distribution function of wide applicability[J]. Journal of Applied Mechanics: Transactions of the ASME, 293(1951).

[21] ISHIKAWA T, ODA H. Defect control of SiC polycrystalline fiber synthesized from poly-aluminocarbosilane[J]. Journal of the European Ceramic Society, 3657(2016).

[22] CAO S Y, WANG J, WANG H. Formation mechanism of large SiC grains on SiC fiber surfaces during heat treatment[J]. CrystEngComm, 3674(2016).

Tools

Get Citation

Copy Citation Text

Shuang WU, Yanzi GOU, Yongshou WANG, Quzhi SONG, Qingyu ZHANG, Yingde WANG. Effect of Heat Treatment on Composition, Microstructure and Mechanical Property of Domestic KD-SA SiC Fibers[J]. Journal of Inorganic Materials, 2023, 38(5): 569

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category:

Received: Sep. 19, 2022

Accepted: --

Published Online: Oct. 17, 2023

The Author Email: Yanzi GOU (y.gou2012@hotmail.com), Yingde WANG (wangyingde@nudt.edu.cn)

DOI:10.15541/jim20220548

Topics

laser devices and laser physics

Lasers and Laser Optics

Laser physics

laser manufacturing

Instrumentation, Measurement and Metrology