[1] [1] LU B H, LI D C. Development of additive manufacturing (3-D printing) technology ［J］. Machine Building & Automation, 2013, 42 (4):1-4（in Chinese）.

[2] [2] LI N, HUANG S, ZHANG G, et al. Progress machine building & automation in additive manufacturing on new materials: A review ［J］. Journal of Materials Science & Technology, 2019, 35(2): 242-269.

[3] [3] WANG D, YANG Y Q, WU W H. Process optimization for 316L stainless steel by fiber laser selective melting［J］.Chinese Journal of Lasers, 2009,36(12):3233-3239（in Chinese）.

[4] [4] ZHANG W Q, ZHU H H, HU Z H, et al. Study on the selective laser melting of AlSi10Mg ［J］. Acta Metallurgica Sinica, 2017,53 (8):918-926（in Chinese）.

[5] [5] SHEYDAEIAN E, TOYSERKANI E. A new approach for fabrication of titanium-titanium boride periodic composite via additive manufacturing and pressure-less sintering ［J］. Composites Part B: Engineering, 2018, 138(8): 140-148.

[6] [6] VAITHILINGAM J, KILSBY S, GOODRIDGE R D, et al. Functionalization of Ti6Al4V components fabricated using selective laser melting with a bioactive compound［J］. Materials Science and Engineering, 2015, C46(1): 52-61.

[7] [7] LIU S, SHIN Y C. Additive manufacturing of Ti6Al4V alloy: A review ［J］. Materials & Design, 2019, 164(2): 107552.

[8] [8] LIU J, SUN Q, WANG X, et al. Achieving Ti6Al4V alloys with both high strength and ductility via selective laser melting ［J］. Materials Science and Engineering, 2019, A766(8): 138319.

[9] [9] XU W, BRANDT M, SUN S, et al. Additive manufacturing of strong and ductile Ti6Al4V by selective laser melting via in situ martensite decomposition ［J］. Acta Materialia, 2015, 85(2): 74-84.

[10] [10] HANG Q, HEN J, ZHAO Z, et al. Microstructure and anisotropic tensile behavior of laser additive manufactured TC21 titanium alloy ［J］. Materials Science and Engineering, 2016, A 673(9): 204-212.

[11] [11] BUSH R W, BRICE C A. Elevated temperature characterization of electron beam freeform fabricated Ti6Al4V and dispersion strengthened Ti8AlEr ［J］. Materials Science and Engineering, 2012, A554(9): 12-21.

[12] [12] BRICE C, SHENOY R, KRAL M, et al. Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing［J］. Materials Science and Engineering, 2015, A648(C): 9-14.

[13] [13] CHUNPING H, XIN L, FENCHENG L, et al. Effects of cooling condition on microstructure and mechanical properties in laser rapid forming of 34CrNiMo6 thin-wall component［J］. The International Journal of Advanced Manufacturing Technology, 2016, 82(5/8): 1269-1279.

[14] [14] MARTIN J H, YAHATA B D, HUNDLEY J M, et al. 3-D printing of high-strength aluminum alloys ［J］. Nature, 2017, 549(7672): 365-369.

[15] [15] BRIF Y, THOMAS M, TODDI. The use of high-entropy alloys in additive manufacturing ［J］. Scripta Materialia, 2015, 99(4): 93-96.

[16] [16] LI R, NIU P, YUAN T, et al. Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: processability, non-equilibrium microstructure and mechanical property［J］. Journal of Alloys and Compounds, 2018, 746(5): 125-134.

[17] [17] KARLSSON D, MARSHAL A, JOHANSSON F, et al. Elemental segregation in an AlCoCrFeNi high-entropy alloy—a comparison between selective laser melting and induction melting ［J］. Journal of Alloys and Compounds, 2019, 784(5): 195-203.

[18] [18] LUO S, GAO P, YU H, et al. Selective laser melting of an equiatomic AlCrCuFeNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical behavior［J］. Journal of Alloys and Compounds, 2019, 771(1): 387-397.

[19] [19] ZHOU P F, XIAO D H, WU Z, et al. Al0.5FeCoCrNi high entropy alloy prepared by selective laser melting with gas-atomized pre-alloy powders ［J］. Materials Science and Engineering,2019, A739(1): 86-89.

[20] [20] YU Zh T, YU S, CHENG J, et al. Development and application of novel biomedical titanium alloy materials ［J］. Acta Metallurgica Sinica, 2017, 53 (10):1238-1264（in Chinese）.

[21] [21] SHI Q, GU D, XIA M, et al. Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites［J］. Optics & Laser Technology, 2016, 84(4): 9-22.

[22] [22] JINGANG X, YONG C, HUI C, et al. Influence of process parameters on forming defects of H13 steel processed by selective laser melting［J］. Laser & Optoelectronics Progress, 2018, 55(4): 041405.

[23] [23] LEUDERS S, THONE M, RIEMER A, et al. On the mechanical behavior of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance ［J］. International Journal of Fatigue, 2013, 48(1): 300-307.

[24] [24] SHUAI L I, CHONGGUI L I, QUNSEN Z, et al. Research status and prospect of additive manufacturing in laser by aluminum alloy［J］. Light Industry Machinery, 2017,49 (3): 23-26.

[25] [25] YUAN X, WEI Q, WEN S, et al. Research on selective laser melting AlSi10Mg alloy powder ［J］. Hot Working Technology, 2014, 4: 99-102.

[26] [26] SHUANGYIN Z, XIN L, JING C, et al. Influence of heat treatment on residual stress of Ti6Al4V alloy by laser solid forming ［J］. Rare Metal Materials and Engineering, 2009, 38(5): 774-778.

[27] [27] ZHANG S, GUI R, WEI Q S, et al. Cracking behavior and formation mechanism of TC4 alloy formed by selective laser melting ［J］. Journal of Mechanical Engineering, 2013, 49(23): 21-27.

[28] [28] LAI Y B, LIU W J, ZHAO J B, et al. Experimental study on residual stress in titanium alloy laser additive manufacturing［J］.Applied Mechanics and Materials, 2013, 431: 20-26.

[29] [29] WANG Z, GUAN K, GAO M, et al. The microstructure and mechanical properties of deposited-IN718 by selective laser melting ［J］. Journal of Alloys and Compounds, 2012, 513(2): 518-523.

[30] [30] ZHANG J, LI Sh, WEI Q S, et al.Cracking behavior and inhibiting process of Inconel 625alloy formed by selective laser melting ［J］. Chinese Journal of Rare Metals, 2015, 39 (11) : 961-966（in Chinese）.

[31] [31] DING J, COLEGROVE P, MEHNEN J, et al. A computationally efficient finite element model of wire and arc additive manufacture ［J］. The International Journal of Advanced Manufacturing Technology, 2014, 70(1/4): 227-236.

[32] [32] WANG T, ZHANG A F, LIANG Sh D, et al. Research on as-deposited microstructures and properties of IN718parts by ultrasonic vibration-assisted laser metal forming［J］.Chinese Journal of Lasers, 2016, 43 (11) :1102005（in Chinese）.

[33] [33] TOLOCHKO N K, MOZZHAROV S E, YADROITSEV I A, et al. Balling processes during selective laser treatment of powders ［J］. Rapid Prototyping Journal, 2004, 10(2): 78-87.

[34] [34] WANG D, WU S, FU F, et al. Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties ［J］. Materials & Design, 2017, 117(3): 121-130.

[35] [35] SCHWEIER M, HEINS J F, HAUBOLD M W, et al. Spatter formation in laser welding with beam oscillation［J］. Physics Procedia, 2013, 41: 20-30.

[36] [36] PUPO Y, MONROY K P, CIURANA J. Influence of process parameters on surface quality of CoCrMo produced by selective laser melting ［J］. The International Journal of Advanced Manufacturing Technology, 2015, 80(5-8): 985-995.

[37] [37] ZHAO S M, SHEN X F, YANG J L, et al. Investigation of densification, microstructural and mechanical properties of water-atomized 316L stainless steel parts fabricated by selective laser melting［J］. Applied Laser, 2017, 37(3): 319-326（in Chinese）.

[38] [38] ABOULKHAIR N T, EVERITT N M, Ashcroft I, et al. Reducing porosity in AlSi10Mg parts processed by selective laser melting［J］. Additive Manufacturing, 2014, 1/4: 77-86.

[39] [39] SING S L, YEONG W Y, WIRIA F E, et al. Characterization of titanium lattice structures fabricated by selective laser melting using an adapted compressive test method ［J］. Experimental Mechanics, 2016, 56(5): 735-748.

[40] [40] YADROITSEV I, SMUROV I. Surface morphology in selective laser melting of metal powders ［J］. Physics Procedia, 2011, 12: 264-270.

[41] [41] WU W H, XIAO D M, YANG Y Q, et al. Analysis on powder adhesion problems in selective laser melting forming process［J］, Hot Working Technology, 2016, 45(24): 43-47（in Chinese）.

[42] [42] YANG T, LIU T, LIAO W, et al. The influence of process parameters on vertical surface roughness of the AlSi10Mg parts fabricated by selective laser melting ［J］. Journal of Materials Processing Technology, 2019, 266: 26-36.

[43] [43] TIAN Y, TOMUS D, ROMETSCH P, et al. Influences of processing parameters on surface roughness of Hastelloy X produced by selective laser melting［J］. Additive Manufacturing, 2017, 13(1): 103-112.

[44] [44] GE Y N, WU M P, MAO Y Y, et al. Effect of scanning strategy on forming precision of titanium alloy by selective laser melting［J］.Laser & Optoelectronics Progress, 2018, 55(9): 091403（in Chinese）.

[45] [45] BALC N, COSMA S C, KESSLER J, et al. Research on improving the outer surface quality of the parts made by SLM［J］.Applied Mechanics and Materials, 2015, 808: 199-204.

[46] [46] YAN A R, YANG T T, WANG Y L, et al. Forming process and high-temperature mechanical properties of variable energy laser selective melting manufacturing IN718 superalloy ［J］. Optics and Precision Engineering, 2015, 23(6): 1695-1704（in Chinese）.

[47] [47] SAVALANI M M, PIZARRO J M. Effect of preheat and layer thickness on selective laser melting (SLM) of magnesium ［J］. Rapid Prototyping Journal, 2016, 22(1): 115-122.

[48] [48] YASA E, KTUTH J P. Application of laser re-melting on selective laser melting parts ［J］. Advances in Production Engineering and Management, 2011, 6(4): 259-270.

[49] [49] ALRBAEY K, WIMPENNY D, TOSI R, et al. On optimization of surface roughness of selective laser melted stainless steel parts: A statistical study ［J］. Journal of Materials Engineering and Performance, 2014, 23(6): 2139-2148.

[50] [50] VAITHILINGAM J, GOODRIDGE R D, HAGUE R J M, et al. The effect of laser remelting on the surface chemistry of Ti6Al4V components fabricated by selective laser melting ［J］. Journal of Materials Processing Technology, 2016, 232(6): 1-8.

[51] [51] BUCHBINDER D, SCHLEIFENBAUM H, HEIDRICH S, et al. High power selective laser melting (HP SLM) of aluminum parts ［J］. Physics Procedia, 2011, 12(A): 271-278.

[52] [52] BARTKOWIAK K, ULLRICH S, FRICK T, et al. New developments of laser processing aluminum alloys via additive manufacturing technique ［J］. Physics Procedia, 2011, 12(A): 393-401.

[53] [53] FLYNN J M, SHOKRANI A, NEWMAN S T, et al. Hybrid additive and subtractive machine tools-research and industrial developments［J］. International Journal of Machine Tools and Manufacture, 2016, 101(2): 79-101.

[54] [54] HANSEL A, MORI M, FUJISHIMA M, et al. Study on consistently optimum deposition conditions of typical metal material using additive/subtractive hybrid machine tool ［J］. Procedia CIRP, 2016, 46: 579-582.

[55] [55] SONG Ch H, WENG Ch W, YANG Y Q, et al. Development status and trend for the equipment of selective laser melted［J］. Mechanical & Electrical Engineering Technology, 2017,46(10):1-5（in Chinese）.

[56] [56] LU B H. Additive manufacturing—Current situation and future ［J］.China Mechanical Engineering, 2020,31 (1):19-23（in Chinese）.

[57] [57] YASA E, KRUTH J P, DECHERS J. Manufacturing by combining selective laser melting and selective laser erosion/laser re-melting［J］. CIRP Annals, 2011, 60(1): 263-266.

[58] [58] DU W, BAI Q, ZHANG B. A novel method for additive/subtractive hybrid manufacturing of metallic parts ［J］. Procedia Manufacturing, 2016, 5: 1018-1030.

[59] [59] LI Q Y, LI D Ch, ZHANG A F, et al. Development and challenge of laser cladding deposition and machining composite manufacturing technology［C］//Intelligentization and Refinement of Special Processing Technology Proceedings of the 17th National Special Processing Academic Conference (Abstract). Suzhou: Non- traditional Machining Branch, Chinese Mechanical Engineering Society, 2017:66-79（in Chinese）.

[60] [60] ZHANG J T, ZHANG W, LI Y J, et al. Laser deposition additive/subtractive hybrid manufacturing process for stainless steel powder based on DMG MORI LASERTEC 65 3D ［J］. Materials Science and Engineering of Powder Metallurgy, 2019, 23(4): 368-374（in Chinese）.

[61] [61] SITTHI-AMORN P, RAMOS J E, WANG Y, et al. MultiFab: A machine vision assisted platform for multi-material 3-D printing ［J］. ACM Transactions on Graphics (Tog), 2015, 34(4): 1-11.

[62] [62] WOHLERS T, CAFFREY T. 3D printing and additive manufacturing state of the industry annual worldwide progress report ［J］. Wohlers Report, 2014, 70(1/4): 227-236.

[63] [63] CAO J, ZHU H B, BAO F et al. Status quo and prospect of 3-D printing research for rail transit sector ［J］. Locomotive & Rolling Stock Technology, 2018,3(6):10-11（in Chinese）.

[64] [64] MA M M, TAN M Z, SUN D X, et al. Fabrication of transmission part in high-voltage earthing switch by selective laser melting ［J］. Electric Locomotives & Mass Transit Vehicles, 2018,41 (1):76-80（in Chinese）.

[65] [65] HAN Ch J. Study on the porous metals and their composites fabricated by selective laser melting for bone implants［D］. Wuhan: Huazhong University of Science and Technology, 2018:38-47（in Chinese）.

[66] [66] WANG Y J, LI W H. The preparation method of variable density porous metal orthopedic implants based on topology optimization technology: CN,107563056A［P］.2018-01-09（in Chinese）.

[67] [67] LI N, HUANG S, ZHANG G, et al. Progress in additive manufacturing on new materials: A review ［J］. Journal of Materials Science & Technology, 2019, 35(2): 242-269.

[68] [68] ZHAO Zh, CHEN J, ZHANG Q, et al. Microstructure and mechanical properties of laser additive repaired Ti17 titanium alloy ［J］. Transactions of Nonferrous Metals Society of China, 2017, 27(12): 2613-2621.

[69] [69] ACHARYA R, DAS S. Additive manufacturing of IN100 superalloy through scanning laser epitaxy for turbine engine hot-section component repair: Process development, modeling, microstructural characterization, and process control ［J］. Metallurgical and Materials Transactions,2015, A46(9): 3864-3875.

[70] [70] WANG H, WANG L W, WANG T, et al. Method and implementation of remanufacture and repair of aircraft engine damaged blades ［J］. Acta Aeronautica et Astronautica Sinica, 2016,37(3):1036-1048（in Chinese）.

[71] [71] FENG H, LI J F, SUN J. Study on remanufacturing repair of damaged crank shaft journal surface by laser cladding［J］. Chinese Journal of Lasers, 2014,41(8): 0803003（in Chinese）.

[72] [72] YANG Ch, L H Zh, MA H W. A 4-D printing method of nickel-titanium shape-memory alloy and its application :CN109648082A ［P］.2019-04-19（in Chinese）.

[73] [73] LI R D, YUAN T Ch, LI L B, et al. The invention relates to a special substrate for 4-D printing of a crack-free Ti-Ni shape memory alloy and a preparation method :CN109112362A ［P］.2019-01-01（in Chinese）.

[74] [74] GAO Y C, ZENG S Y, FENG Y X, et al. Review of design of programmable morphing composite structures by 4-D printing ［J/OL］. Journal of Mechanical Engineering ［2020-07-14］.http://kns.cnki.net/kcms/detail/11.2187.TH.20191224.1229.058.html（in Chinese）.