[1] ZERVAS M N, CODEMARD C A. High power fiber lasers: a review[J]. IEEE Journal of Selected Topics in Quantum Electronics, 20, 219-241(2014).

[2] SCINTILLA L D, TRICARICO L. Fusion cutting of aluminum, magnesium, and titanium alloys using high-power fiber laser[J]. Optical Engineering, 52, 076115(2013).

[3] SHI W, FANG Q, ZHU X et al. Fiber lasers and their applications [Invited][J]. Applied Optics, 53, 6554-6568(2014).

[4] DAWSON J W, MESSRLY M J, BEACH R J et al. Analysis of the scalability of diffraction-limited fiber lasers and amplifiers to high average power[J]. Optics Express, 16, 13240-13266(2008).

[5] EIDAM T, HANF S, SEISE E et al. Femtosecond fiber CPA system emitting 830 W average output power[J]. Optics Letters, 35, 94-96(2010).

[6] HANSEN K R, ALKESKJOLD T T, BROENG J et al. Thermally induced mode coupling in rare-earth doped fiber amplifiers[J]. Optics Letters, 37, 2382-2384(2012).

[7] JAIN D, SAHU J K, FLEMING S. Breaking the stringent trade-off between mode area and NA for efficient high-power fiber lasers around 2 μm[J]. Journal of Lightwave Technology, 38, 6362-6370(2020).

[8] WANG Xiaolin, WEN Yujun, ZHANG Hanwei et al. Ytterbium-doped core-diameter-variable fiber laser: current situation and develop tendency[J]. Chinese Journal of Lasers, 49, 2100001(2022).

[9] ZHANG Z L, LIN X F, ZHANG X et al. Low-numerical aperture confined-doped long-tapered Yb-doped silica fiber for a single-mode high-power fiber amplifier[J]. Optics Express, 30, 32333-32346(2022).

[10] ZHOU X F, CHEN Z L, ZHOU H et al. Mode field adaptation between single-mode fiber and large mode area fiber by thermally expanded core technique[J]. Optics & Laser Technology, 47, 72-75(2013).

[11] JEONG Y, SAHU J K, SOH D B S et al. High-power tunable single-frequency single-mode erbium:ytterbium codoped large-core fiber master-oscillator power amplifier source[J]. Optics Letters, 30, 2997-2999(2005).

[12] WANG Kehong, YU Yang, WANG Yang et al. Comparative study on temperature sensing characteristics of dual mechanisms in hollow core fiber[J]. Acta Photonica Sinica, 51, 1106001(2022).

[13] HAN Zijian, YUAN Xiangyan. Technique and astronomical applications of photonic lanterns (invited)[J]. Acta Photonica Sinica, 52, 0552204(2023).

[14] MCLANDRICH M N. Core dopant profiles in weakly fused single-mode fibres[J]. Electronics Letters, 24, 8-10(1988).

[15] ZHAO K, CHANG X Z, CHEN Z L et al. Fabrication of high-efficiency pump and signal combiner based on a thermally expanded core technique[J]. Optics & Laser Technology, 75, 1-5(2015).

[16] ZHOU Xuanfeng, CHEN Zilun, CHEN Haihuan et al. Study on thermally expanded core technique in single-mode fibers[J]. Acta Optica Sinica, 32, s106009(2012).

[17] DONG F L, ZHANG X H, SONG F. Thermal expanded core technique applied to high power fiber mode field adapter[J]. Chinese Optics Letters, 16, 030602(2018).

[18] YU R W, WANG C Y, BENABID F et al. Robust mode matching between structurally dissimilar optical fiber waveguides[J]. ACS Photonics, 8, 857-863(2021).

[19] LI L B, LOU Q H, ZHOU J et al. High power single transverse mode operation of a tapered large-mode-area fiber laser[J]. Optics Communications, 281, 655-657(2008).

[20] ZHOU X F, CHEN Z L, ZHOU H et al. Mode-field adaptor between large-mode-area fiber and single-mode fiber based on fiber tapering and thermally expanded core technique[J]. Applied Optics, 53, 5053-5057(2014).

[21] LIU Y, HUANG S, WU W et al. 5-kW-level bi-directional high-efficiency pump and signal combiner with negligible beam quality degradation[J]. IEEE Photonics Journal, 14, 1-6(2022).

[22] WANG J W, LI Z X, FU M et al. Fabrication of a counter-directional pump/signal combiner with built-in mode field adapter[J]. Photonics, 10, 1214(2023).

[23] MARCUSE D. Loss analysis of single-mode fiber splices[J]. Bell System Technical Journal, 56, 703-718(1977).

[24] CAO Shanshan, GUO Chaoyang, XU Haitao et al. Fabrication and experiment of a small-size anti-bending optical fiber[J]. Acta Photonica Sinica, 50, 0506001(2021).

[25] KIHARA M, MATSUMOTO M, HAIBARA T et al. Characteristics of thermally expanded core fiber[J]. Journal of Lightwave Technology, 14, 2209-2214(1996).

[26] SHIRAISHI K, AIZAWA Y, KAWAKAMI S. Beam expanding fiber using thermal diffusion of the dopant[J]. Journal of Lightwave Technology, 8, 1151-1161(1990).

[27] BIRKS T A, LI Y W. The shape of fiber tapers[J]. Journal of Lightwave Technology, 10, 432-438(1992).

[28] HE Chunjiang, XIAO Xusheng, XU Yantao et al. Design and preparation of mid-infrared 7×1 sulfide fiber combiner[J]. Acta Photonica Sinica, 52, 1106003(2023).

[29] BLACK R, LACROIX S, GONTHIER F et al. Tapered single-mode fibres and devices. Part 2: experimental and theoretical[J]. IEE Proceedings J (Optoelectronics), 138, 355-364(1991).

[30] LIAO S, GONG M, ZHANG H. Theoretical calculation of beam quality factor of large-mode-area fiber amplifiers[J]. Laser Physics, 19, 437-444(2009).

[31] YAN P, SUN J Y, HUANG Y S et al. Kilowatt-level cladding light stripper for high-power fiber laser[J]. Applied Optics, 56, 1935-1939(2017).

[32] FLAMM D, SCHULZE C, BRÜNING R et al. Fast M2 measurement for fiber beams based on modal analysis[J]. Applied Optics, 51, 987-993(2012).