[1] Majumder S, Mondal T, Deen M J. Wearable sensors for remote health monitoring[J]. Sensors, 17, 130(2017).

[2] Nag A, Mukhopadhyay S C, Kosel J. Wearable flexible sensors: a review[J]. IEEE Sensors Journal, 17, 3949-3960(2017).

[3] Sun M M, Ge Y X, Shen L W et al. Optical fiber Fabry-Perot humidity sensor based on arc discharge optimization[J]. Acta Optica Sinica, 42, 1006002(2022).

[4] Xiao D, Wan S P, Yin X et al. Pulse acquisition system based on curved optical fiber sensor head[J]. Laser & Optoelectronics Progress, 58, 0506006(2021).

[5] Fang S S, Wu X Q, Zhang G et al. High-sensitivity fiber optic temperature and strain sensors based on the vernier effect[J]. Chinese Journal of Lasers, 48, 0106004(2021).

[6] Shrivastav A M, Gunawardena D S, Liu Z Y et al. Microstructured optical fiber based Fabry-Pérot interferometer as a humidity sensor utilizing chitosan polymeric matrix for breath monitoring[J]. Scientific Reports, 10, 6002(2020).

[7] Li D Q, Lu H H, Qiu W T et al. Molybdenum disulfide nanosheets deposited on polished optical fiber for humidity sensing and human breath monitoring[J]. Optics Express, 25, 28407(2017).

[8] Du B B, Yang D X, She X Y et al. MoS2-based all-fiber humidity sensor for monitoring human breath with fast response and recovery[J]. Sensors and Actuators B: Chemical, 251, 180-184(2017).

[9] Presti D L, Massaroni C, Zaltieri M et al. A magnetic resonance-compatible wearable device based on functionalized fiber optic sensor for respiratory monitoring[J]. IEEE Sensors Journal, 21, 14418-14425(2021).

[10] Jiang B Q, Bi Z X, Hao Z et al. Graphene oxide-deposited tilted fiber grating for ultrafast humidity sensing and human breath monitoring[J]. Sensors and Actuators B: Chemical, 293, 336-341(2019).

[11] Li X X, Liu D J, Kumar R et al. A simple optical fiber interferometer based respiratory sensor[J]. Measurement Science and Technology, 28, 035105(2017).

[12] Wang Y L, Liu B, Pang Y N et al. Low-cost wearable sensor based on a D-shaped plastic optical fiber for respiration monitoring[J]. IEEE Transactions on Instrumentation and Measurement, 70, 4004808(2021).

[13] Schermer R T, Cole J H. Improved bend loss formula verified for optical fiber by simulation and experiment[J]. IEEE Journal of Quantum Electronics, 43, 899-909(2007).

[14] Shen C Y, Zhong C, You Y et al. Polarization-dependent curvature sensor based on an in-fiber Mach-Zehnder interferometer with a difference arithmetic demodulation method[J]. Optics Express, 20, 15406-15417(2012).

[15] Yuan W H, Zhao Q C, Li L D et al. Simultaneous measurement of temperature and curvature using ring-core fiber-based Mach-Zehnder interferometer[J]. Optics Express, 29, 17915-17925(2021).

[16] Gong Y, Zhao T, Rao Y J et al. All-fiber curvature sensor based on multimode interference[J]. IEEE Photonics Technology Letters, 23, 679-681(2011).

[17] Cui W, Si J H, Chen T et al. Compact bending sensor based on a fiber Bragg grating in an abrupt biconical taper[J]. Optics Express, 23, 11031-11036(2015).

[18] Zhang Y S, Zhang W G, Zhang Y X et al. Simultaneous measurement of curvature and temperature based on LP11 mode Bragg grating in seven-core fiber[J]. Measurement Science and Technology, 28, 055101(2017).

[19] Ni K, Li T, Hu L M et al. Temperature-independent curvature sensor based on tapered photonic crystal fiber interferometer[J]. Optics Communications, 285, 5148-5150(2012).